From 5efb356ddb93bf50e2593f1763e1635213284427 Mon Sep 17 00:00:00 2001 From: openwrt Date: Sun, 28 Mar 2004 00:16:07 +0000 Subject: [PATCH] initial checkin git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- CVSROOT/checkoutlist | 13 +++++++++++++ CVSROOT/commitinfo | 15 +++++++++++++++ CVSROOT/config | 14 ++++++++++++++ CVSROOT/cvswrappers | 23 +++++++++++++++++++++++ CVSROOT/editinfo | 21 +++++++++++++++++++++ CVSROOT/modules | 26 ++++++++++++++++++++++++++ CVSROOT/notify | 12 ++++++++++++ CVSROOT/rcsinfo | 13 +++++++++++++ CVSROOT/taginfo | 20 ++++++++++++++++++++ CVSROOT/verifymsg | 21 +++++++++++++++++++++ 10 files changed, 178 insertions(+) create mode 100644 CVSROOT/checkoutlist create mode 100644 CVSROOT/commitinfo create mode 100644 CVSROOT/config create mode 100644 CVSROOT/cvswrappers create mode 100644 CVSROOT/editinfo create mode 100644 CVSROOT/modules create mode 100644 CVSROOT/notify create mode 100644 CVSROOT/rcsinfo create mode 100644 CVSROOT/taginfo create mode 100644 CVSROOT/verifymsg diff --git a/CVSROOT/checkoutlist b/CVSROOT/checkoutlist new file mode 100644 index 000000000..b04b3501f --- /dev/null +++ b/CVSROOT/checkoutlist @@ -0,0 +1,13 @@ +# The "checkoutlist" file is used to support additional version controlled +# administrative files in $CVSROOT/CVSROOT, such as template files. +# +# The first entry on a line is a filename which will be checked out from +# the corresponding RCS file in the $CVSROOT/CVSROOT directory. +# The remainder of the line is an error message to use if the file cannot +# be checked out. +# +# File format: +# +# [] +# +# comment lines begin with '#' diff --git a/CVSROOT/commitinfo b/CVSROOT/commitinfo new file mode 100644 index 000000000..b19e7b7a6 --- /dev/null +++ b/CVSROOT/commitinfo @@ -0,0 +1,15 @@ +# The "commitinfo" file is used to control pre-commit checks. +# The filter on the right is invoked with the repository and a list +# of files to check. A non-zero exit of the filter program will +# cause the commit to be aborted. +# +# The first entry on a line is a regular expression which is tested +# against the directory that the change is being committed to, relative +# to the $CVSROOT. For the first match that is found, then the remainder +# of the line is the name of the filter to run. +# +# If the repository name does not match any of the regular expressions in this +# file, the "DEFAULT" line is used, if it is specified. +# +# If the name "ALL" appears as a regular expression it is always used +# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/config b/CVSROOT/config new file mode 100644 index 000000000..ff43ec005 --- /dev/null +++ b/CVSROOT/config @@ -0,0 +1,14 @@ +# Set this to "no" if pserver shouldn't check system users/passwords +#SystemAuth=no + +# Put CVS lock files in this directory rather than directly in the repository. +#LockDir=/var/lock/cvs + +# Set `TopLevelAdmin' to `yes' to create a CVS directory at the top +# level of the new working directory when using the `cvs checkout' +# command. +#TopLevelAdmin=no + +# Set `LogHistory' to `all' or `TOFEWGCMAR' to log all transactions to the +# history file, or a subset as needed (ie `TMAR' logs all write operations) +#LogHistory=TOFEWGCMAR diff --git a/CVSROOT/cvswrappers b/CVSROOT/cvswrappers new file mode 100644 index 000000000..0accaf1b1 --- /dev/null +++ b/CVSROOT/cvswrappers @@ -0,0 +1,23 @@ +# This file affects handling of files based on their names. +# +# The -t/-f options allow one to treat directories of files +# as a single file, or to transform a file in other ways on +# its way in and out of CVS. +# +# The -m option specifies whether CVS attempts to merge files. +# +# The -k option specifies keyword expansion (e.g. -kb for binary). +# +# Format of wrapper file ($CVSROOT/CVSROOT/cvswrappers or .cvswrappers) +# +# wildcard [option value][option value]... +# +# where option is one of +# -f from cvs filter value: path to filter +# -t to cvs filter value: path to filter +# -m update methodology value: MERGE or COPY +# -k expansion mode value: b, o, kkv, &c +# +# and value is a single-quote delimited value. +# For example: +#*.gif -k 'b' diff --git a/CVSROOT/editinfo b/CVSROOT/editinfo new file mode 100644 index 000000000..d78886c15 --- /dev/null +++ b/CVSROOT/editinfo @@ -0,0 +1,21 @@ +# The "editinfo" file is used to allow verification of logging +# information. It works best when a template (as specified in the +# rcsinfo file) is provided for the logging procedure. Given a +# template with locations for, a bug-id number, a list of people who +# reviewed the code before it can be checked in, and an external +# process to catalog the differences that were code reviewed, the +# following test can be applied to the code: +# +# Making sure that the entered bug-id number is correct. +# Validating that the code that was reviewed is indeed the code being +# checked in (using the bug-id number or a seperate review +# number to identify this particular code set.). +# +# If any of the above test failed, then the commit would be aborted. +# +# Actions such as mailing a copy of the report to each reviewer are +# better handled by an entry in the loginfo file. +# +# One thing that should be noted is the the ALL keyword is not +# supported. There can be only one entry that matches a given +# repository. diff --git a/CVSROOT/modules b/CVSROOT/modules new file mode 100644 index 000000000..cb9e9efc9 --- /dev/null +++ b/CVSROOT/modules @@ -0,0 +1,26 @@ +# Three different line formats are valid: +# key -a aliases... +# key [options] directory +# key [options] directory files... +# +# Where "options" are composed of: +# -i prog Run "prog" on "cvs commit" from top-level of module. +# -o prog Run "prog" on "cvs checkout" of module. +# -e prog Run "prog" on "cvs export" of module. +# -t prog Run "prog" on "cvs rtag" of module. +# -u prog Run "prog" on "cvs update" of module. +# -d dir Place module in directory "dir" instead of module name. +# -l Top-level directory only -- do not recurse. +# +# NOTE: If you change any of the "Run" options above, you'll have to +# release and re-checkout any working directories of these modules. +# +# And "directory" is a path to a directory relative to $CVSROOT. +# +# The "-a" option specifies an alias. An alias is interpreted as if +# everything on the right of the "-a" had been typed on the command line. +# +# You can encode a module within a module by using the special '&' +# character to interpose another module into the current module. This +# can be useful for creating a module that consists of many directories +# spread out over the entire source repository. diff --git a/CVSROOT/notify b/CVSROOT/notify new file mode 100644 index 000000000..34f0bc288 --- /dev/null +++ b/CVSROOT/notify @@ -0,0 +1,12 @@ +# The "notify" file controls where notifications from watches set by +# "cvs watch add" or "cvs edit" are sent. The first entry on a line is +# a regular expression which is tested against the directory that the +# change is being made to, relative to the $CVSROOT. If it matches, +# then the remainder of the line is a filter program that should contain +# one occurrence of %s for the user to notify, and information on its +# standard input. +# +# "ALL" or "DEFAULT" can be used in place of the regular expression. +# +# For example: +#ALL mail %s -s "CVS notification" diff --git a/CVSROOT/rcsinfo b/CVSROOT/rcsinfo new file mode 100644 index 000000000..49e59f4d0 --- /dev/null +++ b/CVSROOT/rcsinfo @@ -0,0 +1,13 @@ +# The "rcsinfo" file is used to control templates with which the editor +# is invoked on commit and import. +# +# The first entry on a line is a regular expression which is tested +# against the directory that the change is being made to, relative to the +# $CVSROOT. For the first match that is found, then the remainder of the +# line is the name of the file that contains the template. +# +# If the repository name does not match any of the regular expressions in this +# file, the "DEFAULT" line is used, if it is specified. +# +# If the name "ALL" appears as a regular expression it is always used +# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/taginfo b/CVSROOT/taginfo new file mode 100644 index 000000000..274a46dd5 --- /dev/null +++ b/CVSROOT/taginfo @@ -0,0 +1,20 @@ +# The "taginfo" file is used to control pre-tag checks. +# The filter on the right is invoked with the following arguments: +# +# $1 -- tagname +# $2 -- operation "add" for tag, "mov" for tag -F, and "del" for tag -d +# $3 -- repository +# $4-> file revision [file revision ...] +# +# A non-zero exit of the filter program will cause the tag to be aborted. +# +# The first entry on a line is a regular expression which is tested +# against the directory that the change is being committed to, relative +# to the $CVSROOT. For the first match that is found, then the remainder +# of the line is the name of the filter to run. +# +# If the repository name does not match any of the regular expressions in this +# file, the "DEFAULT" line is used, if it is specified. +# +# If the name "ALL" appears as a regular expression it is always used +# in addition to the first matching regex or "DEFAULT". diff --git a/CVSROOT/verifymsg b/CVSROOT/verifymsg new file mode 100644 index 000000000..86f747ce2 --- /dev/null +++ b/CVSROOT/verifymsg @@ -0,0 +1,21 @@ +# The "verifymsg" file is used to allow verification of logging +# information. It works best when a template (as specified in the +# rcsinfo file) is provided for the logging procedure. Given a +# template with locations for, a bug-id number, a list of people who +# reviewed the code before it can be checked in, and an external +# process to catalog the differences that were code reviewed, the +# following test can be applied to the code: +# +# Making sure that the entered bug-id number is correct. +# Validating that the code that was reviewed is indeed the code being +# checked in (using the bug-id number or a seperate review +# number to identify this particular code set.). +# +# If any of the above test failed, then the commit would be aborted. +# +# Actions such as mailing a copy of the report to each reviewer are +# better handled by an entry in the loginfo file. +# +# One thing that should be noted is the the ALL keyword is not +# supported. There can be only one entry that matches a given +# repository. -- 2.20.1