From 7e0819a929ddda78b59ff1e44aef785e6d57ca6e Mon Sep 17 00:00:00 2001 From: hauke Date: Sun, 19 Feb 2012 14:05:17 +0000 Subject: [PATCH 1/1] mac80211: add brcmsmac driver brcmsmac does not work on bcm47xx based devices or has AP mode support for now. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30643 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/kernel/modules/lib.mk | 32 ++++ package/mac80211/Makefile | 45 ++++- .../patches/022-remove_crc8_and_cordic.patch | 166 ++++++++++++++++++ .../patches/120-pr_fmt_warnings.patch | 60 +++++++ 4 files changed, 300 insertions(+), 3 deletions(-) create mode 100644 package/mac80211/patches/022-remove_crc8_and_cordic.patch diff --git a/package/kernel/modules/lib.mk b/package/kernel/modules/lib.mk index 432248edd..b26054195 100644 --- a/package/kernel/modules/lib.mk +++ b/package/kernel/modules/lib.mk @@ -52,6 +52,22 @@ endef $(eval $(call KernelPackage,lib-crc7)) +define KernelPackage/lib-crc8 + SUBMENU:=$(LIB_MENU) + TITLE:=CRC8 support + DEPENDS:= @!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_36||LINUX_2_6_37||LINUX_2_6_38||LINUX_2_6_39||LINUX_3_0) + KCONFIG:=CONFIG_CRC8 + FILES:=$(LINUX_DIR)/lib/crc8.ko + AUTOLOAD:=$(call AutoLoad,20,crc8) +endef + +define KernelPackage/lib-crc8/description + Kernel module for CRC8 support +endef + +$(eval $(call KernelPackage,lib-crc8)) + + define KernelPackage/lib-crc16 SUBMENU:=$(LIB_MENU) TITLE:=CRC16 support @@ -129,3 +145,19 @@ define KernelPackage/lib-zlib endef $(eval $(call KernelPackage,lib-zlib)) + + +define KernelPackage/lib-cordic + SUBMENU:=$(LIB_MENU) + TITLE:=Cordic function support + DEPENDS:= @!(LINUX_2_6_30||LINUX_2_6_31||LINUX_2_6_32||LINUX_2_6_36||LINUX_2_6_37||LINUX_2_6_38||LINUX_2_6_39||LINUX_3_0) + KCONFIG:=CONFIG_CORDIC + FILES:=$(LINUX_DIR)/lib/cordic.ko + AUTOLOAD:=$(call AutoLoad,20,cordic) +endef + +define KernelPackage/lib-cordic/description + Kernel module for Cordic function support +endef + +$(eval $(call KernelPackage,lib-cordic)) diff --git a/package/mac80211/Makefile b/package/mac80211/Makefile index e1e7806bc..c56db3470 100644 --- a/package/mac80211/Makefile +++ b/package/mac80211/Makefile @@ -1080,6 +1080,34 @@ define KernelPackage/b43legacy/description Kernel module for Broadcom 43xx-legacy wireless support (mac80211 stack) new endef +define KernelPackage/brcmsmac + $(call KernelPackage/mac80211/Default) + TITLE:=Broadcom IEEE802.11n PCIe SoftMAC WLAN driver + URL:=http://linuxwireless.org/en/users/Drivers/brcm80211 + DEPENDS+= +@DRIVER_11N_SUPPORT +!TARGET_brcm47xx:kmod-bcma +kmod-lib-cordic +kmod-lib-crc8 + FILES:= \ + $(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmsmac/brcmsmac.ko \ + $(PKG_BUILD_DIR)/drivers/net/wireless/brcm80211/brcmutil/brcmutil.ko + AUTOLOAD:=$(call AutoLoad,30,brcmutil brcmsmac) + MENU:=1 +endef + +define KernelPackage/brcmsmac/description + Kernel modules for Broadcom IEEE802.11n PCIe Wireless cards +endef + +define KernelPackage/brcmsmac/config + menu "Configuration" + depends on PACKAGE_kmod-brcmsmac + + config PACKAGE_BRCM80211_DEBUG + bool "brcmsmac wireless debugging" + help + Say Y, if you want to debug brcmsmac wireless driver. + + endmenu +endef + BUILDFLAGS:= \ -I$(PKG_BUILD_DIR)/include \ $(foreach opt,$(CONFOPTS),-DCONFIG_$(opt)) \ @@ -1116,7 +1144,8 @@ BUILDFLAGS:= \ $(if $(CONFIG_TARGET_atheros),-DCONFIG_ATH5K_AHB,-DCONFIG_ATH5K_PCI) \ $(if $(CONFIG_PACKAGE_kmod-iwl3945),-DCONFIG_IWL3945) \ $(if $(CONFIG_PACKAGE_kmod-iwl4965),-DCONFIG_COMPAT_IWL4965) \ - $(if $(CONFIG_PACKAGE_kmod-wl12xx),-DCONFIG_WL12XX -DCONFIG_COMPAT_WL12XX_SDIO) + $(if $(CONFIG_PACKAGE_kmod-wl12xx),-DCONFIG_WL12XX -DCONFIG_COMPAT_WL12XX_SDIO) \ + $(if $(CONFIG_PACKAGE_BRCM80211_DEBUG),-DCONFIG_BRCMDBG) MAKE_OPTS:= \ CROSS_COMPILE="$(KERNEL_CROSS)" \ @@ -1247,8 +1276,9 @@ MAKE_OPTS:= \ CONFIG_ATL1E= \ CONFIG_ATL1C= \ CONFIG_BRCMFMAC= \ - CONFIG_BRCMUMAC= \ - CONFIG_BRCMSMAC= \ + CONFIG_BRCMUTIL=$(if $(CONFIG_PACKAGE_kmod-brcmsmac),m) \ + CONFIG_BRCMSMAC=$(if $(CONFIG_PACKAGE_kmod-brcmsmac),m) \ + CONFIG_BRCMDBG=$(if $(CONFIG_PACKAGE_BRCM80211_DEBUG),y) \ KLIB_BUILD="$(LINUX_DIR)" \ MODPROBE=true \ KLIB=$(TARGET_MODULES_DIR) \ @@ -1492,6 +1522,14 @@ ifneq ($(CONFIG_B43LEGACY_FW_SQUASH),) endif endef +define KernelPackage/brcmsmac/install + $(INSTALL_DIR) $(1)/lib/firmware/brcm + $(INSTALL_DATA) \ + $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/bcm43xx-0.fw \ + $(PKG_BUILD_DIR)/$(PKG_LINUX_FIRMWARE_SUBDIR)/brcm/bcm43xx_hdr-0.fw \ + $(1)/lib/firmware/brcm/ +endef + $(eval $(call KernelPackage,ath5k)) $(eval $(call KernelPackage,lib80211)) $(eval $(call KernelPackage,libertas-usb)) @@ -1525,6 +1563,7 @@ $(eval $(call KernelPackage,ath)) $(eval $(call KernelPackage,carl9170)) $(eval $(call KernelPackage,b43)) $(eval $(call KernelPackage,b43legacy)) +$(eval $(call KernelPackage,brcmsmac)) $(eval $(call KernelPackage,net-libipw)) $(eval $(call KernelPackage,net-ipw2100)) $(eval $(call KernelPackage,net-ipw2200)) diff --git a/package/mac80211/patches/022-remove_crc8_and_cordic.patch b/package/mac80211/patches/022-remove_crc8_and_cordic.patch new file mode 100644 index 000000000..514d56b85 --- /dev/null +++ b/package/mac80211/patches/022-remove_crc8_and_cordic.patch @@ -0,0 +1,166 @@ +--- a/compat/Makefile ++++ b/compat/Makefile +@@ -36,8 +36,6 @@ compat-$(CONFIG_COMPAT_KERNEL_2_6_39) += + compat-$(CONFIG_COMPAT_KERNEL_3_0) += compat-3.0.o + compat-$(CONFIG_COMPAT_KERNEL_3_2) += compat-3.2.o + +-compat-$(CONFIG_COMPAT_CORDIC) += cordic.o +-compat-$(CONFIG_COMPAT_CRC8) += crc8.o + + ifndef CONFIG_64BIT + ifndef CONFIG_GENERIC_ATOMIC64 +--- a/include/linux/cordic.h ++++ /dev/null +@@ -1,48 +0,0 @@ +-/* +- * Copyright (c) 2011 Broadcom Corporation +- * +- * Permission to use, copy, modify, and/or distribute this software for any +- * purpose with or without fee is hereby granted, provided that the above +- * copyright notice and this permission notice appear in all copies. +- * +- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY +- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION +- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN +- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +- */ +-#ifndef __CORDIC_H_ +-#define __CORDIC_H_ +- +-#include +- +-/** +- * struct cordic_iq - i/q coordinate. +- * +- * @i: real part of coordinate (in phase). +- * @q: imaginary part of coordinate (quadrature). +- */ +-struct cordic_iq { +- s32 i; +- s32 q; +-}; +- +-/** +- * cordic_calc_iq() - calculates the i/q coordinate for given angle. +- * +- * @theta: angle in degrees for which i/q coordinate is to be calculated. +- * @coord: function output parameter holding the i/q coordinate. +- * +- * The function calculates the i/q coordinate for a given angle using +- * cordic algorithm. The coordinate consists of a real (i) and an +- * imaginary (q) part. The real part is essentially the cosine of the +- * angle and the imaginary part is the sine of the angle. The returned +- * values are scaled by 2^16 for precision. The range for theta is +- * for -180 degrees to +180 degrees. Passed values outside this range are +- * converted before doing the actual calculation. +- */ +-struct cordic_iq cordic_calc_iq(s32 theta); +- +-#endif /* __CORDIC_H_ */ +--- a/include/linux/crc8.h ++++ /dev/null +@@ -1,101 +0,0 @@ +-/* +- * Copyright (c) 2011 Broadcom Corporation +- * +- * Permission to use, copy, modify, and/or distribute this software for any +- * purpose with or without fee is hereby granted, provided that the above +- * copyright notice and this permission notice appear in all copies. +- * +- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES +- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY +- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION +- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN +- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +- */ +-#ifndef __CRC8_H_ +-#define __CRC8_H_ +- +-#include +- +-/* see usage of this value in crc8() description */ +-#define CRC8_INIT_VALUE 0xFF +- +-/* +- * Return value of crc8() indicating valid message+crc. This is true +- * if a CRC is inverted before transmission. The CRC computed over the +- * whole received bitstream is _table[x], where x is the bit pattern +- * of the modification (almost always 0xff). +- */ +-#define CRC8_GOOD_VALUE(_table) (_table[0xFF]) +- +-/* required table size for crc8 algorithm */ +-#define CRC8_TABLE_SIZE 256 +- +-/* helper macro assuring right table size is used */ +-#define DECLARE_CRC8_TABLE(_table) \ +- static u8 _table[CRC8_TABLE_SIZE] +- +-/** +- * crc8_populate_lsb - fill crc table for given polynomial in regular bit order. +- * +- * @table: table to be filled. +- * @polynomial: polynomial for which table is to be filled. +- * +- * This function fills the provided table according the polynomial provided for +- * regular bit order (lsb first). Polynomials in CRC algorithms are typically +- * represented as shown below. +- * +- * poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1 +- * +- * For lsb first direction x^7 maps to the lsb. So the polynomial is as below. +- * +- * - lsb first: poly = 10101011(1) = 0xAB +- */ +-void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial); +- +-/** +- * crc8_populate_msb - fill crc table for given polynomial in reverse bit order. +- * +- * @table: table to be filled. +- * @polynomial: polynomial for which table is to be filled. +- * +- * This function fills the provided table according the polynomial provided for +- * reverse bit order (msb first). Polynomials in CRC algorithms are typically +- * represented as shown below. +- * +- * poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1 +- * +- * For msb first direction x^7 maps to the msb. So the polynomial is as below. +- * +- * - msb first: poly = (1)11010101 = 0xD5 +- */ +-void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial); +- +-/** +- * crc8() - calculate a crc8 over the given input data. +- * +- * @table: crc table used for calculation. +- * @pdata: pointer to data buffer. +- * @nbytes: number of bytes in data buffer. +- * @crc: previous returned crc8 value. +- * +- * The CRC8 is calculated using the polynomial given in crc8_populate_msb() +- * or crc8_populate_lsb(). +- * +- * The caller provides the initial value (either %CRC8_INIT_VALUE +- * or the previous returned value) to allow for processing of +- * discontiguous blocks of data. When generating the CRC the +- * caller is responsible for complementing the final return value +- * and inserting it into the byte stream. When validating a byte +- * stream (including CRC8), a final return value of %CRC8_GOOD_VALUE +- * indicates the byte stream data can be considered valid. +- * +- * Reference: +- * "A Painless Guide to CRC Error Detection Algorithms", ver 3, Aug 1993 +- * Williams, Ross N., rossross.net +- * (see URL http://www.ross.net/crc/download/crc_v3.txt). +- */ +-u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc); +- +-#endif /* __CRC8_H_ */ diff --git a/package/mac80211/patches/120-pr_fmt_warnings.patch b/package/mac80211/patches/120-pr_fmt_warnings.patch index 5fde76214..c71777843 100644 --- a/package/mac80211/patches/120-pr_fmt_warnings.patch +++ b/package/mac80211/patches/120-pr_fmt_warnings.patch @@ -175,3 +175,63 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include +--- a/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/aiutils.c +@@ -16,6 +16,7 @@ + * File contents: support functions for PCI/PCIe + */ + ++#undef pr_fmt + #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + + #include +--- a/drivers/net/wireless/brcm80211/brcmsmac/dma.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/dma.c +@@ -14,6 +14,7 @@ + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + ++#undef pr_fmt + #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + + #include +--- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +@@ -15,6 +15,7 @@ + */ + + #define __UNDEF_NO_VERSION__ ++#undef pr_fmt + #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + + #include +--- a/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/phy/phy_n.c +@@ -14,6 +14,7 @@ + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + ++#undef pr_fmt + #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + + #include +--- a/drivers/net/wireless/brcm80211/brcmutil/utils.c ++++ b/drivers/net/wireless/brcm80211/brcmutil/utils.c +@@ -14,6 +14,7 @@ + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + ++#undef pr_fmt + #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + + #include +--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c ++++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c +@@ -14,6 +14,7 @@ + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + ++#undef pr_fmt + #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + + #include -- 2.20.1