From e7bcb2908a8cf4d248270212daccc0f51798d179 Mon Sep 17 00:00:00 2001 From: hauke Date: Sun, 14 Jun 2009 09:39:43 +0000 Subject: [PATCH] D-Link DIR-320 support (broadcom-diag) This patch adds D-Link DIR-320 support to broadcom-diag. "reserved" button is the button on the right side of the router without any title. I'm not sure if I've selected right name. Signed-off-by: Leonid Evdokimov git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16443 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- package/broadcom-diag/src/diag.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c index 4667591a1..834a83abd 100644 --- a/package/broadcom-diag/src/diag.c +++ b/package/broadcom-diag/src/diag.c @@ -123,6 +123,7 @@ enum { /* D-Link */ DIR130, + DIR320, DIR330, DWL3150, @@ -718,6 +719,20 @@ static struct platform_t __initdata platforms[] = { { .name = "blue", .gpio = 1 << 6}, }, }, + [DIR320] = { + .name = "D-Link DIR-320", + .buttons = { + { .name = "reserved", .gpio = 1 << 6}, + { .name = "reset", .gpio = 1 << 7}, + }, + .leds = { + { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL }, + { .name = "diag", .gpio = 1 << 1, .polarity = NORMAL }, /* "status led */ + { .name = "red", .gpio = 1 << 3, .polarity = REVERSE }, + { .name = "blue", .gpio = 1 << 4, .polarity = REVERSE }, + { .name = "usb", .gpio = 1 << 5, .polarity = NORMAL }, + }, + }, [DIR330] = { .name = "D-Link DIR-330", .buttons = { @@ -875,6 +890,10 @@ static struct platform_t __init *platform_detect(void) if (!strcmp(getvar("boardtype"), "0x0101") && !strcmp(getvar("boardrev"), "0x10")) /* SE505V2 With Modified CFE */ return &platforms[SE505V2]; + if (!strcmp(boardtype, "0x048e") && !strcmp(getvar("boardrev"),"0x35") && + !strcmp(getvar("boardflags"), "0x750")) /* D-Link DIR-320 */ + return &platforms[DIR320]; + } else { /* PMON based - old stuff */ if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) && (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) { -- 2.20.1