RepRap%2FConfigs%2FSlic3r%2Flarsan.ini.mw

   1 # generated by Slic3r 0.9.10 on Sun Sep 29 22:51:39 2013
   2 avoid_crossing_perimeters = 0
   3 bed_size = 160,190
   4 bed_temperature = 50
   5 bottom_solid_layers = 3
   6 bridge_acceleration = 0
   7 bridge_fan_speed = 100
   8 bridge_flow_ratio = 1
   9 bridge_speed = 60
  10 brim_width = 0
  11 complete_objects = 1
  12 cooling = 1
  13 default_acceleration = 0
  14 disable_fan_first_layers = 1
  15 duplicate = 1
  16 duplicate_distance = 6
  17 duplicate_grid = 1,1
  18 end_gcode = M104 S0 ; turn off extruder temperature\n;M140 S0 ; turn off bed temperature; currently disabled\nG0 X0    ; move X axis to 0\nG92 Z0 E5 ;define current point as Z0 E5\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y198 F6000 ; drive print table all the way out\nM84     ; disable motors
  19 external_perimeter_speed = 70%
  20 external_perimeters_first = 0
  21 extra_perimeters = 1
  22 extruder_clearance_height = 1
  23 extruder_clearance_radius = 30
  24 extruder_offset = 0x0
  25 extrusion_axis = E
  26 extrusion_multiplier = 1
  27 extrusion_width = 180%
  28 fan_always_on = 0
  29 fan_below_layer_time = 60
  30 filament_diameter = 1.75
  31 fill_angle = 45
  32 fill_density = 0.3
  33 fill_pattern = honeycomb
  34 first_layer_bed_temperature = 50
  35 first_layer_extrusion_width = 0
  36 first_layer_height = 0.25
  37 first_layer_speed = 30%
  38 first_layer_temperature = 200
  39 g0 = 0
  40 gap_fill_speed = 15
  41 gcode_arcs = 0
  42 gcode_comments = 0
  43 gcode_flavor = reprap
  44 infill_acceleration = 0
  45 infill_every_layers = 1
  46 infill_extruder = 1
  47 infill_extrusion_width = 0
  48 infill_first = 0
  49 infill_only_where_needed = 0
  50 infill_speed = 60
  51 layer_gcode =
  52 layer_height = 0.25
  53 max_fan_speed = 100
  54 min_fan_speed = 35
  55 min_print_speed = 5
  56 min_skirt_length = 0
  57 notes = larsanconfig
  58 nozzle_diameter = 0.5
  59 only_retract_when_crossing_perimeters = 1
  60 output_filename_format = [input_filename_base].gcode
  61 perimeter_acceleration = 0
  62 perimeter_extruder = 1
  63 perimeter_extrusion_width = 0
  64 perimeter_speed = 80
  65 perimeters = 3
  66 post_process =
  67 print_center = 90,60
  68 raft_layers = 0
  69 randomize_start = 0
  70 resolution = 0
  71 retract_before_travel = 2
  72 retract_layer_change = 1
  73 retract_length = 2
  74 retract_length_toolchange = 10
  75 retract_lift = 0
  76 retract_restart_extra = 0
  77 retract_restart_extra_toolchange = 0
  78 retract_speed = 35
  79 rotate = 0
  80 scale = 1
  81 skirt_distance = 10
  82 skirt_height = 1
  83 skirts = 3
  84 slowdown_below_layer_time = 30
  85 small_perimeter_speed = 50
  86 solid_fill_pattern = rectilinear
  87 solid_infill_below_area = 40
  88 solid_infill_every_layers = 0
  89 solid_infill_extrusion_width = 0
  90 solid_infill_speed = 80
  91 spiral_vase = 0
  92 start_gcode = G28 X0 Y0 ; home X and Y\nG0 X60; move to X60\nG92 X0; set postition to X=0\nG28 Z0; home Z
  93 support_material = 0
  94 support_material_angle = 0
  95 support_material_enforce_layers = 0
  96 support_material_extruder = 1
  97 support_material_extrusion_width = 0
  98 support_material_interface_layers = 0
  99 support_material_interface_spacing = 0
 100 support_material_pattern = rectilinear
 101 support_material_spacing = 2.5
 102 support_material_speed = 65
 103 support_material_threshold = 0
 104 temperature = 195
 105 threads = 1
 106 toolchange_gcode =
 107 top_infill_extrusion_width = 0
 108 top_solid_infill_speed = 60
 109 top_solid_layers = 3
 110 travel_speed = 80
 111 use_relative_e_distances = 0
 112 vibration_limit = 0
 113 wipe = 0
 114 z_offset = 0