Eine Seite um (gute) Beispielkonfigkurationen zu sammeln, am besten mit Beispieldruck(foto) == Gelbes Filament == * Damit gedruckt: der letzte gelbe frame-vertex für den Drucker * etwas wärmer (195°C) * 0.22 mm z-offeset
acceleration = 0 bed_size = 170,170 bed_temperature = 60 bridge_fan_speed = 100 bridge_flow_ratio = 1 bridge_speed = 30 brim_width = 0 complete_objects = 0 cooling = 1 disable_fan_first_layers = 1 duplicate = 1 duplicate_distance = 6 duplicate_grid = 1,1 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors external_perimeter_speed = 90% extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_axis = E extrusion_multiplier = 1 extrusion_width = 0 fan_always_on = 0 fan_below_layer_time = 60 filament_diameter = 3 fill_angle = 45 fill_density = 0.15 fill_pattern = rectilinear first_layer_bed_temperature = 60 first_layer_extrusion_width = 0 first_layer_height = 115% first_layer_speed = 80% first_layer_temperature = 200 g0 = 0 gcode_arcs = 0 gcode_comments = 0 gcode_flavor = reprap infill_acceleration = 50 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0 infill_speed = 40 layer_gcode = layer_height = 0.28 max_fan_speed = 100 min_fan_speed = 35 min_print_speed = 10 notes = Used for Mate name tag nozzle_diameter = 0.35 output_filename_format = [input_filename_base].gcode perimeter_acceleration = 25 perimeter_speed = 30 perimeters = 3 perimeters_extruder = 1 perimeters_extrusion_width = 0 post_process = print_center = 50,27 randomize_start = 1 retract_before_travel = 4 retract_length = 3 retract_lift = 0.4 retract_restart_extra = 0 retract_speed = 30 rotate = 0 scale = 1 skirt_distance = 6 skirt_height = 1 skirts = 3 slowdown_below_layer_time = 60 small_perimeter_speed = 30 solid_fill_pattern = rectilinear solid_infill_speed = 40 solid_layers = 3 start_gcode = G28 ; home all axes\nM92 E820 support_material = support_material_angle = 45 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_threshold = 45 temperature = 195 threads = 2 top_solid_infill_speed = 40 travel_speed = 130 use_relative_e_distances = 0 z_offset = 0.22[[Kategorie:RepRap]]