Der Reprap, welcher derzeit im Space steht ist Privateigentum von [[Benutzer:DanielWillmann|Daniel]]. Er war nicht gerade billig, deshalb sollten einige Regeln befolgt werden.
==Zweiter RepRap==
+''Der Baufortschritt der nächsten Generation ist zu finden unter [[Reprap/Child]].''
+
Zudem wird Daniel den Drucker irgendwann zu sich holen. Deshalb (aber nicht nur deshalb) ist geplant, einen weiteren RepRap fürs Stratum anzuschaffen.
Am 21.05.2012 gab es einen Aufruf zum Pledgefunding, und innerhalb von ca. zwei Tagen gingen Pledges über mehr als genug Geld ein.
z_offset = 0
</pre>
+==== Von larsan ====
+Basierend auf der Mateconfig. Ist momentan so eingestellt, dass recht nah am Urspung, also vorne links gedruckt wird, das muss ggf für jedes Bauteil einzeln angepasst werden.
+<pre style="height:200px;overflow:scroll;">
+acceleration = 0
+bed_size = 170,170
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_width = 0
+complete_objects = 0
+cooling = 1
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
+external_perimeter_speed = 90%
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 135%
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 3
+fill_angle = 45
+fill_density = 0.15
+fill_pattern = honeycomb
+first_layer_bed_temperature = 60
+first_layer_extrusion_width = 0
+first_layer_height = 115%
+first_layer_speed = 80%
+first_layer_temperature = 195
+g0 = 0
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_speed = 60
+layer_gcode =
+layer_height = 0.28
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+notes = Used for Mate name tag
+nozzle_diameter = 0.35
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 25
+perimeter_speed = 40
+perimeters = 3
+perimeters_extruder = 1
+perimeters_extrusion_width = 0
+post_process =
+print_center = 45,30
+randomize_start = 1
+retract_before_travel = 4
+retract_length = 1
+retract_lift = 0.4
+retract_restart_extra = 0
+retract_speed = 30
+rotate = 0
+scale = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 3
+slowdown_below_layer_time = 60
+small_perimeter_speed = 40
+solid_fill_pattern = rectilinear
+solid_infill_speed = 60
+solid_layers = 3
+start_gcode = G28 ; home all axes\nM92 E820
+support_material =
+support_material_angle = 45
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_threshold = 45
+temperature = 185
+threads = 2
+top_solid_infill_speed = 50
+travel_speed = 130
+use_relative_e_distances = 0
+z_offset = 0
+</pre>
+
===Drucken===
* Mit Printrun Datei auf Drucker drucken
projects / stratum0-wiki.git / blobdiff