+
+
+'''Resinlab ist jetzt voll schön <3'''
+
+
+How to Use the Resin Printer:<br>
+
+Please do not use the resin printer without prior instruction.<br>
+
+Prepare an .stl Model. (3D-printer page...)<br>
+
+Use Chitubox: https://www.chitubox.com/en/index<br>
+Learn how to prepare your model in Chitubox by watching this helpful video:<br>
+https://www.youtube.com/watch?v=L-DKWm_ZUoQ
+
+
+Printer: Elegoo Saturn<br>
+System: EL3D-3.0.1<br>
+Firmware: V4.4.3-Z1_LCDZ/3840X2400/F2.18<br>
+For more information, visit: https://www.elegoo.com/blogs/3d-printer-user-guide/tagged/saturn
+
+
+Good printer starting settings in Chitubox:<br>
+Load the default settings for this printer (Elegoo Saturn) in Chitubox and then make the following changes:<br>
+Exposure Time: 8s<br>
+Bottom Exposure Time: 60s<br>
+
+
+Resin types we currently have:<br>
+?
+
+Resin settings for Elegoo resins:<br>
+https://drive.google.com/file/d/1_jnyMfNkm4sPJhKyN46ey5CO-ks4MRyR/view
+
+
+Resin settings for other resins:<br>
+https://docs.google.com/spreadsheets/d/14R1cGB1-OxLteH79fH0lgn85j9g45iooQzL8hPbbVJk/edit#gid=669571052
+
+
+'''Steps in the lab:'''<br>
+The key to the lab is next to the Space door (green key fob).<br>
+
+
+Please be careful while working with resin printers. Everything will be sticky!<br>
+Put paper on unprotected surfaces and everywhere you plan to put sticky stuff.<br>
+
+Resin is not good for you! Wear gloves! Change sticky gloves when necessary.<br>
+Some people can manage to have one sticky glove and one clean one.<br>
+
+Turn the printer on. The switch is on the back left side.<br>
+Insert your USB stick on the right side of the printer.<br>
+Check if the resin is clean (nothing solid should be in there!) using a spatula. Gently move the spatula along the bottom of the tank.<br>
+If it is not clean, filter the resin.<br>
+Check if the building plate is clean.<br>
+
+
+Filtering resin:<br>
+Filter the resin into the bottle it came from. Use the metal funnel and filter in the lab.<br>
+Clean the funnel and filter after use.<br>
+
+
+Changing resin:<br>
+Filter the resin into the bottle (metal funnel and filter are somewhere close to you!), clean the tank, and put new resin in.<br>
+We should have more tanks with other resin to make this simpler, faster, and cleaner.<br>
+
+
+Use the touch display to check your settings and start the print.<br>
+...
+
+Wear new gloves!<br>
+After the print, remove the build plate and gently take your print off the build platform using a spatula.<br>
+
+Avoid touching your print too much, as it is very soft at this point.<br>
+
+We have an Elegoo Mercury Plus wash and cure station:<br>
+https://www.elegoo.com/products/elegoo-mercury-plus-washing-and-curing-machine
+
+
+Set the clear tank containing bioethanol (or isopropanol) on the base of the wash and cure station. Put your print into the metal cage and place both into the tank.<br>
+Turn on the wash and cure station, choose the circular arrows for cleaning, and set the timer to ~2 minutes (depends on the model and freshness of the isopropanol), then start the cleaning process.<br>
+
+Remove the tank and put in the little turntable.<br>
+
+You can carefully (model and supports are soft now) try to remove supports now. Otherwise, supports can be removed later by snapping them off.<br>
+
+Set your model on the turntable and switch the station to the little light bulb.<br>
+Put on the cover and set the timer to ~3 minutes (depends on your model), then press start.<br>
+
+The print is finished.<br>
+
+'''Now, please clean everything!'''
projects / stratum0-wiki.git / blobdiff