Pad für Serienvorschläge und mit einer Verfahrensbeschreibung ist nun online.

[stratum0-wiki.git] / 3D-Drucker%2FSlicerBundle.ini.mw

diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw
index 1bf9929..086ef0e 100644 (file)
--- a/3D-Drucker%2FSlicerBundle.ini.mw
+++ b/3D-Drucker%2FSlicerBundle.ini.mw
@@ -1,23 +1,113 @@
-# generated by Slic3r 1.2.9 on Tue Apr 26 23:46:04 2016
+# generated by Slic3r 1.2.9 on Sun Aug 14 14:31:08 2016

 
 

-[filament:LULZBOT PLA]
+[filament:LulzBot ABS]
+bed_temperature = 100
+bridge_fan_speed = 50
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 2.85
+first_layer_bed_temperature = 100
+first_layer_temperature = 250
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 20
+temperature = 230
+
+[filament:LulzBot PLA]

 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1

+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 2.82
+first_layer_bed_temperature = 50
+first_layer_temperature = 200
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 5
+slowdown_below_layer_time = 30
+temperature = 200
+
+[filament:LulzBot PLA DAS FILAMENT]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 2.85
+first_layer_bed_temperature = 50
+first_layer_temperature = 220
+max_fan_speed = 100
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 30
+temperature = 215
+
+[filament:MendelPro ABS]
+bed_temperature = 0
+bridge_fan_speed = 100
+cooling = 0
+disable_fan_first_layers = 1
+extrusion_multiplier = 1

 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #FFFFFF

-filament_diameter = 2.89
+filament_diameter = 1.7
+first_layer_bed_temperature = 0
+first_layer_temperature = 250
+max_fan_speed = 100
+min_fan_speed = 50
+min_print_speed = 5
+slowdown_below_layer_time = 30
+temperature = 245
+
+[filament:MendelPro Holz]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 1.7

 first_layer_bed_temperature = 55
 first_layer_bed_temperature = 55

-first_layer_temperature = 190
+first_layer_temperature = 200

 max_fan_speed = 100
 max_fan_speed = 100

-min_fan_speed = 35
-min_print_speed = 25
-slowdown_below_layer_time = 25
+min_fan_speed = 50
+min_print_speed = 5
+slowdown_below_layer_time = 30

 temperature = 185
 
 temperature = 185
 

+[filament:MendelPro Mystery]
+bed_temperature = 80
+bridge_fan_speed = 50
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 1.7
+first_layer_bed_temperature = 80
+first_layer_temperature = 250
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 10
+slowdown_below_layer_time = 20
+temperature = 200
+

 [filament:MendelPro PLA]
 bed_temperature = 50
 bridge_fan_speed = 100
 [filament:MendelPro PLA]
 bed_temperature = 50
 bridge_fan_speed = 100


@@ -31,10 +121,46 @@ filament_diameter = 1.7
 first_layer_bed_temperature = 55
 first_layer_temperature = 200
 max_fan_speed = 100
 first_layer_bed_temperature = 55
 first_layer_temperature = 200
 max_fan_speed = 100

+min_fan_speed = 40
+min_print_speed = 5
+slowdown_below_layer_time = 30
+temperature = 185
+
+[filament:MendelPro PLA fast]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 1.7
+first_layer_bed_temperature = 50
+first_layer_temperature = 200
+max_fan_speed = 100

 min_fan_speed = 50
 min_print_speed = 5
 slowdown_below_layer_time = 30
 min_fan_speed = 50
 min_print_speed = 5
 slowdown_below_layer_time = 30

-temperature = 180
+temperature = 200
+
+[filament:MendelPro PLA transparent]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 1.7
+first_layer_bed_temperature = 55
+first_layer_temperature = 200
+max_fan_speed = 100
+min_fan_speed = 40
+min_print_speed = 5
+slowdown_below_layer_time = 30
+temperature = 200

 
 [filament:TinyBoy PLA]
 bed_temperature = 0
 
 [filament:TinyBoy PLA]
 bed_temperature = 0


@@ -45,16 +171,70 @@ extrusion_multiplier = 0.9
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #35E1FF
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #35E1FF

-filament_diameter = 1.7
+filament_diameter = 1.63

 first_layer_bed_temperature = 0
 first_layer_temperature = 200
 first_layer_bed_temperature = 0
 first_layer_temperature = 200

-max_fan_speed = 50
+max_fan_speed = 40

 min_fan_speed = 35
 min_print_speed = 5
 slowdown_below_layer_time = 15
 min_fan_speed = 35
 min_print_speed = 5
 slowdown_below_layer_time = 15

-temperature = 185
+temperature = 190
+
+[filament:Prusa i3 ABS grün]
+bed_temperature = 100
+bridge_fan_speed = 70
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #80FF00
+filament_diameter = 2.9
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 245
+
+[filament:Prusa i3 ABS grün blau]
+bed_temperature = 100
+bridge_fan_speed = 70
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #0000A0
+filament_diameter = 2.9
+first_layer_bed_temperature = 100
+first_layer_temperature = 240
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 30
+temperature = 235
+
+[filament:Prusa i3 ABS schwarz]
+bed_temperature = 100
+bridge_fan_speed = 70
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #000000
+filament_diameter = 2.9
+first_layer_bed_temperature = 100
+first_layer_temperature = 260
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 255

 
 

-[filament:prusa i3 PLA]
+[filament:Prusa i3 PLA]

 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1


@@ -63,83 +243,375 @@ extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FFFFFF

-filament_diameter = 2.8
-first_layer_bed_temperature = 55
+filament_diameter = 2.9
+first_layer_bed_temperature = 50

 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 50
 min_print_speed = 5
 slowdown_below_layer_time = 30
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 50
 min_print_speed = 5
 slowdown_below_layer_time = 30

+temperature = 190
+
+[filament:Prusa i3 PLA lila]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #8000FF
+filament_diameter = 3
+first_layer_bed_temperature = 50
+first_layer_temperature = 200
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 200
+
+[filament:Prusa i3 PLA pink]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #FF00FF
+filament_diameter = 2.83
+first_layer_bed_temperature = 50
+first_layer_temperature = 200
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 5
+slowdown_below_layer_time = 15

 temperature = 180
 
 temperature = 180
 

-[presets]
-filament = TinyBoy PLA.ini
-print = TinyBoy.ini
-printer = MendelPro.ini
+[print:LulzBot fine]
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_width = 5
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 35
+fill_density = 15%
+fill_pattern = 3dhoneycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 10
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 80
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 2
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 60
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 10
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 20
+solid_infill_below_area = 30
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 45
+thin_walls = 1
+threads = 2
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 3
+travel_speed = 100
+xy_size_compensation = 0
+
+[print:LulzBot fine support]
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 2
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_width = 3
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 35
+fill_density = 15%
+fill_pattern = 3dhoneycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 10
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 80
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 2
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 60
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 10
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 20
+solid_infill_below_area = 30
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = honeycomb
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 45
+thin_walls = 1
+threads = 2
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 3
+travel_speed = 100
+xy_size_compensation = 0
+
+[print:MendelPro]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_width = 1
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 15%
+fill_pattern = 3dhoneycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 10
+gap_fill_speed = 10
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 0
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 2
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 0
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 1
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 10
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 5
+support_material_speed = 60
+support_material_threshold = 40
+thin_walls = 1
+threads = 2
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 3
+travel_speed = 100
+xy_size_compensation = 0

 
 

-[print:LULZBOT]
+[print:MendelPro fast]

 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3

-bridge_acceleration = 2000
+bridge_acceleration = 0

 bridge_flow_ratio = 1
 bridge_flow_ratio = 1

-bridge_speed = 72
+bridge_speed = 40

 brim_width = 0
 complete_objects = 0
 brim_width = 0
 complete_objects = 0

-default_acceleration = 2000
+default_acceleration = 0

 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 45
+external_perimeter_speed = 20

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20

-extrusion_width = 0.42
+extrusion_width = 0

 fill_angle = 45
 fill_angle = 45

-fill_density = 20%
-fill_pattern = rectilinear
-first_layer_acceleration = 2000
-first_layer_extrusion_width = 0.53
+fill_density = 15%
+fill_pattern = 3dhoneycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0

 first_layer_height = 0.2
 first_layer_height = 0.2

-first_layer_speed = 75%
-gap_fill_speed = 55
+first_layer_speed = 10
+gap_fill_speed = 10

 gcode_comments = 0
 gcode_comments = 0

-infill_acceleration = 2000
+infill_acceleration = 0

 infill_every_layers = 1
 infill_extruder = 1
 infill_every_layers = 1
 infill_extruder = 1

-infill_extrusion_width = 0.68
+infill_extrusion_width = 0

 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%

-infill_speed = 80
+infill_speed = 0

 interface_shells = 0
 interface_shells = 0

-layer_height = 0.2
+layer_height = 0.5

 max_print_speed = 80
 max_volumetric_speed = 0
 max_print_speed = 80
 max_volumetric_speed = 0

-min_skirt_length = 0
+min_skirt_length = 2

 notes = 
 notes = 

-only_retract_when_crossing_perimeters = 0
+only_retract_when_crossing_perimeters = 1

 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
 overhangs = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
 overhangs = 1

-perimeter_acceleration = 1200
+perimeter_acceleration = 0

 perimeter_extruder = 1
 perimeter_extruder = 1

-perimeter_extrusion_width = 0.38
-perimeter_speed = 75
+perimeter_extrusion_width = 0
+perimeter_speed = 0

 perimeters = 2
 post_process = 
 raft_layers = 0
 perimeters = 2
 post_process = 
 raft_layers = 0

-resolution = 0.001
+resolution = 0

 seam_position = aligned
 seam_position = aligned

-skirt_distance = 6
+skirt_distance = 1

 skirt_height = 1
 skirt_height = 1

-skirts = 3
-small_perimeter_speed = 50
-solid_infill_below_area = 90
+skirts = 2
+small_perimeter_speed = 10
+solid_infill_below_area = 70

 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_every_layers = 0
 solid_infill_extruder = 1

-solid_infill_extrusion_width = 0.5
-solid_infill_speed = 75
+solid_infill_extrusion_width = 0
+solid_infill_speed = 0

 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0


@@ -149,27 +621,114 @@ support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1

-support_material_interface_layers = 0
+support_material_interface_layers = 2

 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear

+support_material_spacing = 5
+support_material_speed = 60
+support_material_threshold = 40
+thin_walls = 1
+threads = 2
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 3
+travel_speed = 100
+xy_size_compensation = 0
+
+[print:MendelPro support]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 40
+brim_width = 3
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 15%
+fill_pattern = 3dhoneycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 10
+gap_fill_speed = 10
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 0
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 2
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 0
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 1
+skirt_height = 1
+skirts = 2
+small_perimeter_speed = 10
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = honeycomb

 support_material_spacing = 2.5
 support_material_speed = 60
 support_material_spacing = 2.5
 support_material_speed = 60

-support_material_threshold = 45
+support_material_threshold = 40

 thin_walls = 1
 threads = 2
 thin_walls = 1
 threads = 2

-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 60
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20

 top_solid_layers = 3
 top_solid_layers = 3

-travel_speed = 160
+travel_speed = 100

 xy_size_compensation = 0
 
 xy_size_compensation = 0
 

-[print:MendelPro]
+[print:TinyBoy]

 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1

-bridge_speed = 35
+bridge_speed = 40

 brim_width = 0
 complete_objects = 0
 default_acceleration = 0
 brim_width = 0
 complete_objects = 0
 default_acceleration = 0


@@ -184,12 +743,12 @@ extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%

-fill_pattern = rectilinear
+fill_pattern = 3dhoneycomb

 first_layer_acceleration = 0
 first_layer_acceleration = 0

-first_layer_extrusion_width = 150%
+first_layer_extrusion_width = 0

 first_layer_height = 0.2
 first_layer_speed = 10
 first_layer_height = 0.2
 first_layer_speed = 10

-gap_fill_speed = 10
+gap_fill_speed = 20

 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1


@@ -201,7 +760,7 @@ infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0
 layer_height = 0.2
 infill_speed = 0
 interface_shells = 0
 layer_height = 0.2

-max_print_speed = 35
+max_print_speed = 80

 max_volumetric_speed = 0
 min_skirt_length = 1
 notes = 
 max_volumetric_speed = 0
 min_skirt_length = 1
 notes = 


@@ -221,7 +780,7 @@ seam_position = aligned
 skirt_distance = 1
 skirt_height = 1
 skirts = 1
 skirt_distance = 1
 skirt_height = 1
 skirts = 1

-small_perimeter_speed = 10
+small_perimeter_speed = 0

 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1


@@ -247,11 +806,11 @@ thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 20
 threads = 2
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 20

-top_solid_layers = 3
+top_solid_layers = 4

 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 

-[print:TinyBoy]
+[print:TinyBoy support]

 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0


@@ -271,12 +830,12 @@ extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%

-fill_pattern = rectilinear
+fill_pattern = 3dhoneycomb

 first_layer_acceleration = 0
 first_layer_acceleration = 0

-first_layer_extrusion_width = 150%
+first_layer_extrusion_width = 0

 first_layer_height = 0.2
 first_layer_speed = 10
 first_layer_height = 0.2
 first_layer_speed = 10

-gap_fill_speed = 10
+gap_fill_speed = 20

 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1


@@ -308,7 +867,7 @@ seam_position = aligned
 skirt_distance = 1
 skirt_height = 1
 skirts = 1
 skirt_distance = 1
 skirt_height = 1
 skirts = 1

-small_perimeter_speed = 10
+small_perimeter_speed = 0

 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1


@@ -316,9 +875,9 @@ solid_infill_extrusion_width = 0
 solid_infill_speed = 0
 spiral_vase = 0
 standby_temperature_delta = -5
 solid_infill_speed = 0
 spiral_vase = 0
 standby_temperature_delta = -5

-support_material = 0
+support_material = 1

 support_material_angle = 0
 support_material_angle = 0

-support_material_contact_distance = 0.2
+support_material_contact_distance = 0.3

 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0


@@ -334,23 +893,110 @@ thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 20
 threads = 2
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 20

-top_solid_layers = 3
+top_solid_layers = 4
+travel_speed = 100
+xy_size_compensation = 0
+
+[print:ToyRep]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 2
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 0
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 0
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 0%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 10
+gap_fill_speed = 0
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 0
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 10
+max_volumetric_speed = 0
+min_skirt_length = 1
+notes = 
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 0
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 1
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 0
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_contact_distance = 0.3
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 5
+support_material_speed = 0
+support_material_threshold = 40
+thin_walls = 1
+threads = 2
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 0
+top_solid_layers = 0

 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 

-[print:prusa i3 250]
+[print:Prusa i3 200]

 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40

-brim_width = 0
+brim_width = 5

 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 10
+external_perimeter_speed = 20

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20


@@ -358,12 +1004,12 @@ extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%

-fill_pattern = rectilinear
+fill_pattern = 3dhoneycomb

 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_speed = 15
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_speed = 15

-gap_fill_speed = 10
+gap_fill_speed = 20

 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1


@@ -374,7 +1020,7 @@ infill_only_where_needed = 0
 infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0
 infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0

-layer_height = 0.25
+layer_height = 0.2

 max_print_speed = 60
 max_volumetric_speed = 0
 min_skirt_length = 1
 max_print_speed = 60
 max_volumetric_speed = 0
 min_skirt_length = 1


@@ -395,7 +1041,7 @@ seam_position = aligned
 skirt_distance = 1
 skirt_height = 1
 skirts = 1
 skirt_distance = 1
 skirt_height = 1
 skirts = 1

-small_perimeter_speed = 10
+small_perimeter_speed = 15

 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1


@@ -405,17 +1051,17 @@ spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0

-support_material_contact_distance = 0.2
+support_material_contact_distance = 0

 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 2
 support_material_interface_spacing = 0
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 2
 support_material_interface_spacing = 0

-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 5
-support_material_speed = 0
+support_material_interface_speed = 10
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 40

 support_material_threshold = 40
 thin_walls = 1
 threads = 2
 support_material_threshold = 40
 thin_walls = 1
 threads = 2


@@ -425,19 +1071,19 @@ top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 

-[print:prusa i3 400]
+[print:Prusa i3 200 support]

 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40

-brim_width = 0
+brim_width = 5

 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 10
+external_perimeter_speed = 20

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20


@@ -445,12 +1091,12 @@ extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%

-fill_pattern = rectilinear
+fill_pattern = 3dhoneycomb

 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_speed = 15
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_speed = 15

-gap_fill_speed = 10
+gap_fill_speed = 20

 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1


@@ -461,8 +1107,8 @@ infill_only_where_needed = 0
 infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0
 infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0

-layer_height = 0.4
-max_print_speed = 80
+layer_height = 0.2
+max_print_speed = 60

 max_volumetric_speed = 0
 min_skirt_length = 1
 notes = 
 max_volumetric_speed = 0
 min_skirt_length = 1
 notes = 


@@ -476,13 +1122,13 @@ perimeter_extrusion_width = 0
 perimeter_speed = 0
 perimeters = 2
 post_process = 
 perimeter_speed = 0
 perimeters = 2
 post_process = 

-raft_layers = 0
+raft_layers = 1

 resolution = 0
 seam_position = aligned
 skirt_distance = 1
 skirt_height = 1
 skirts = 1
 resolution = 0
 seam_position = aligned
 skirt_distance = 1
 skirt_height = 1
 skirts = 1

-small_perimeter_speed = 10
+small_perimeter_speed = 15

 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1


@@ -490,7 +1136,7 @@ solid_infill_extrusion_width = 0
 solid_infill_speed = 0
 spiral_vase = 0
 standby_temperature_delta = -5
 solid_infill_speed = 0
 spiral_vase = 0
 standby_temperature_delta = -5

-support_material = 0
+support_material = 1

 support_material_angle = 0
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_angle = 0
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0


@@ -499,10 +1145,10 @@ support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 2
 support_material_interface_spacing = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 2
 support_material_interface_spacing = 0

-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 5
-support_material_speed = 0
+support_material_interface_speed = 10
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 40

 support_material_threshold = 40
 thin_walls = 1
 threads = 2
 support_material_threshold = 40
 thin_walls = 1
 threads = 2


@@ -512,26 +1158,26 @@ top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 

-[printer:LULZBOT]
-bed_shape = 0x0,300x0,300x300,0x300
+[printer:LulzBot]
+bed_shape = 0x0,298x0,298x275,0x275

 before_layer_gcode = 
 before_layer_gcode = 

-end_gcode = M400      ;   \nM104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200\nG28 X0  ; home X axis\nM84     ; disable motors
+end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors

 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 

-nozzle_diameter = 0.5
+nozzle_diameter = 0.35

 octoprint_apikey = 
 octoprint_host = 
 pressure_advance = 0
 retract_before_travel = 2
 retract_layer_change = 1
 octoprint_apikey = 
 octoprint_host = 
 pressure_advance = 0
 retract_before_travel = 2
 retract_layer_change = 1

-retract_length = 1.9
+retract_length = 2

 retract_length_toolchange = 3
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_length_toolchange = 3
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0

-retract_speed = 30
-start_gcode = G28 ; home all axes
+retract_speed = 20
+start_gcode = G28 ; home all axes\n

 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0


@@ -543,7 +1189,7 @@ z_offset = 0
 [printer:MendelPro]
 bed_shape = 0x0,220x0,220x177,0x177
 before_layer_gcode = 
 [printer:MendelPro]
 bed_shape = 0x0,220x0,220x177,0x177
 before_layer_gcode = 

-end_gcode = M104 S0        ; turn off temperature\nM140 S0;\nG28 X0           ; home X axis\nM84               ; disable motors\n
+end_gcode = M104 S0        ; turn off temperature\nM140 S0;\nG28 X0           ; home X axis\nG0 Y177;\nM84               ; disable motors\n

 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 


@@ -559,7 +1205,7 @@ retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40

-start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
+start_gcode = G28 Z            ; home Z\nG28 X Y         ; home X Y\n

 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0


@@ -596,10 +1242,38 @@ vibration_limit = 0
 wipe = 0
 z_offset = 0
 
 wipe = 0
 z_offset = 0
 

-[printer:prusa i3]
+[printer:ToyRep]
+bed_shape = 0x0,125x0,125x125,0x125
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off nozzle temperature\nM84 ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 0
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 10
+start_gcode = \n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+
+[printer:Prusa i3]

 bed_shape = 0x0,190x0,190x190,0x190
 before_layer_gcode = 
 bed_shape = 0x0,190x0,190x190,0x190
 before_layer_gcode = 

-end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\n\n
+end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\nM81               ; Power off\n\n

 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 


@@ -615,8 +1289,8 @@ retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40

-start_gcode = G28 Z            ; home Z\nG0 Z 1          ; lift Z\nG28 X Y         ; home X Y\n
-toolchange_gcode = 
+start_gcode = G28 Z            ; home Z\nG0 Z1            ; lift Z\nG28 X Y         ; home X Y\nG0         Y40 ; clab move
+toolchange_gcode = M83 ; turn on relative movement for extruder  \nG1 E-5  ; retract filament 5mm  \nG1 X10 Y10 Z4.000000  ; home X and Y axis leave Z at current height  \nM84 E ; release extruder stepper motor from 'holding' position  \n@pause ; pause print!  \nG1 E0 ; reset extruder, ready to push out plastic again  \nM82 ; set extruder movement back to absolute ready for next layer  

 use_firmware_retraction = 0
 use_relative_e_distances = 0
 use_volumetric_e = 0
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 use_volumetric_e = 0