*Empty MediaWiki Message*

[stratum0-wiki.git] / 3D-Drucker%2FSlicerBundle.ini.mw

diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw
index a91c883..89f4e03 100644 (file)
--- a/3D-Drucker%2FSlicerBundle.ini.mw
+++ b/3D-Drucker%2FSlicerBundle.ini.mw
@@ -1,96 +1,6 @@
-# generated by Slic3r 1.2.9 on Tue Nov  1 09:16:29 2016
+# generated by Slic3r 1.2.9 on Mon Nov 21 19:45:57 2016

 
 

-[filament:Lulzbot ABS]
-bed_temperature = 100
-bridge_fan_speed = 50
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #FFFFFF
-filament_diameter = 2.85
-first_layer_bed_temperature = 100
-first_layer_temperature = 250
-max_fan_speed = 0
-min_fan_speed = 0
-min_print_speed = 5
-slowdown_below_layer_time = 20
-temperature = 230
-
-[filament:Lulzbot PETG ]
-bed_temperature = 75
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #B1EB96
-filament_diameter = 2.85
-first_layer_bed_temperature = 75
-first_layer_temperature = 235
-max_fan_speed = 100
-min_fan_speed = 50
-min_print_speed = 10
-slowdown_below_layer_time = 30
-temperature = 235
-
-[filament:Lulzbot PLA]
-bed_temperature = 50
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #C0C0C0
-filament_diameter = 2.86
-first_layer_bed_temperature = 50
-first_layer_temperature = 200
-max_fan_speed = 100
-min_fan_speed = 50
-min_print_speed = 5
-slowdown_below_layer_time = 30
-temperature = 200
-
-[filament:LulzBot PLA DAS FILAMENT]
-bed_temperature = 50
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #FFFFFF
-filament_diameter = 2.85
-first_layer_bed_temperature = 50
-first_layer_temperature = 220
-max_fan_speed = 100
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 30
-temperature = 215
-
-[filament:Lulzbot PLA Weiß]
-bed_temperature = 50
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #FFFFFF
-filament_diameter = 2.85
-first_layer_bed_temperature = 50
-first_layer_temperature = 200
-max_fan_speed = 100
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 30
-temperature = 180
-
-[filament:MendelPro ABS]
+[filament:1.75mm ABS]

 bed_temperature = 0
 bridge_fan_speed = 50
 cooling = 1
 bed_temperature = 0
 bridge_fan_speed = 50
 cooling = 1


@@ -99,16 +9,16 @@ extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #FFFFFF

-filament_diameter = 1.7
+filament_diameter = 1.75

 first_layer_bed_temperature = 0
 first_layer_bed_temperature = 0

-first_layer_temperature = 250
+first_layer_temperature = 240

 max_fan_speed = 0
 min_fan_speed = 0
 min_print_speed = 5
 slowdown_below_layer_time = 30
 temperature = 230
 
 max_fan_speed = 0
 min_fan_speed = 0
 min_print_speed = 5
 slowdown_below_layer_time = 30
 temperature = 230
 

-[filament:MendelPro Holz]
+[filament:1.75mm Holz]

 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1


@@ -117,16 +27,16 @@ extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FFFFFF

-filament_diameter = 1.7
-first_layer_bed_temperature = 55
+filament_diameter = 1.75
+first_layer_bed_temperature = 50

 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 50
 min_print_speed = 5
 slowdown_below_layer_time = 30
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 50
 min_print_speed = 5
 slowdown_below_layer_time = 30

-temperature = 185
+temperature = 190

 
 

-[filament:MendelPro PLA]
+[filament:1.75mm PLA]

 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1


@@ -135,16 +45,16 @@ extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FFFFFF

-filament_diameter = 1.7
+filament_diameter = 1.75

 first_layer_bed_temperature = 50
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 50
 min_print_speed = 5
 slowdown_below_layer_time = 15
 first_layer_bed_temperature = 50
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 50
 min_print_speed = 5
 slowdown_below_layer_time = 15

-temperature = 180
+temperature = 185

 
 

-[filament:TinyBoy PLA]
+[filament:1.75mm PLA TinyBoy]

 bed_temperature = 0
 bridge_fan_speed = 100
 cooling = 1
 bed_temperature = 0
 bridge_fan_speed = 100
 cooling = 1


@@ -162,79 +72,43 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 190
 
 slowdown_below_layer_time = 15
 temperature = 190
 

-[filament:prusa i3 ABS grün]
+[filament:2.85mm ABS]

 bed_temperature = 100
 bed_temperature = 100

-bridge_fan_speed = 70
+bridge_fan_speed = 50

 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 60
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 60

-filament_colour = #80FF00
-filament_diameter = 2.9
+filament_colour = #FFFFFF
+filament_diameter = 2.85

 first_layer_bed_temperature = 100
 first_layer_bed_temperature = 100

-first_layer_temperature = 255
+first_layer_temperature = 250

 max_fan_speed = 0
 min_fan_speed = 0
 min_print_speed = 5
 max_fan_speed = 0
 min_fan_speed = 0
 min_print_speed = 5

-slowdown_below_layer_time = 15
-temperature = 245
-
-[filament:prusa i3 ABS grün blau]
-bed_temperature = 100
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #0000A0
-filament_diameter = 2.9
-first_layer_bed_temperature = 100
-first_layer_temperature = 240
-max_fan_speed = 0
-min_fan_speed = 0
-min_print_speed = 10
-slowdown_below_layer_time = 30
-temperature = 235
-
-[filament:prusa i3 PLA grau]
-bed_temperature = 50
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #808080
-filament_diameter = 2.86
-first_layer_bed_temperature = 50
-first_layer_temperature = 200
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 10
-temperature = 185
+slowdown_below_layer_time = 20
+temperature = 230

 
 

-[filament:prusa i3 PLA lila]
-bed_temperature = 50
+[filament:2.85mm PETG ]
+bed_temperature = 75

 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60

-filament_colour = #8000FF
-filament_diameter = 3
-first_layer_bed_temperature = 50
-first_layer_temperature = 200
+filament_colour = #B1EB96
+filament_diameter = 2.85
+first_layer_bed_temperature = 75
+first_layer_temperature = 235

 max_fan_speed = 100
 max_fan_speed = 100

-min_fan_speed = 35
+min_fan_speed = 50

 min_print_speed = 10
 min_print_speed = 10

-slowdown_below_layer_time = 10
-temperature = 200
+slowdown_below_layer_time = 30
+temperature = 235

 
 

-[filament:prusa i3 PLA pink]
+[filament:2.85mm PLA]

 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1


@@ -243,16 +117,16 @@ extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FF00FF
 fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FF00FF

-filament_diameter = 2.83
+filament_diameter = 2.85

 first_layer_bed_temperature = 50
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 slowdown_below_layer_time = 10
 first_layer_bed_temperature = 50
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 slowdown_below_layer_time = 10

-temperature = 180
+temperature = 185

 
 

-[filament:prusa i3 Willowflex]
+[filament:2.85mm Willowflex]

 bed_temperature = 70
 bridge_fan_speed = 100
 cooling = 1
 bed_temperature = 70
 bridge_fan_speed = 100
 cooling = 1


@@ -263,31 +137,31 @@ fan_below_layer_time = 60
 filament_colour = #BF0005
 filament_diameter = 2.85
 first_layer_bed_temperature = 70
 filament_colour = #BF0005
 filament_diameter = 2.85
 first_layer_bed_temperature = 70

-first_layer_temperature = 200
+first_layer_temperature = 160

 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 slowdown_below_layer_time = 10
 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 10
 slowdown_below_layer_time = 10

-temperature = 180
+temperature = 160

 
 [presets]
 
 [presets]

-filament = prusa i3 Willowflex.ini
-print = MendelPro.ini
-printer = Lulzbot.ini
+filament = 2.85mm Willowflex.ini
+print = prusa i3.ini
+printer = prusa i3.ini

 
 [print:Lulzbot]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 
 [print:Lulzbot]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_flow_ratio = 1

-bridge_speed = 40
-brim_width = 0
+bridge_speed = 60
+brim_width = 1

 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 20
+external_perimeter_speed = 40

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20


@@ -314,7 +188,7 @@ interface_shells = 0
 layer_height = 0.2
 max_print_speed = 100
 max_volumetric_speed = 0
 layer_height = 0.2
 max_print_speed = 100
 max_volumetric_speed = 0

-min_skirt_length = 2
+min_skirt_length = 3

 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0


@@ -323,43 +197,43 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0

-perimeter_speed = 60
-perimeters = 2
+perimeter_speed = 80
+perimeters = 3

 post_process = 
 raft_layers = 0
 resolution = 0
 seam_position = nearest
 post_process = 
 raft_layers = 0
 resolution = 0
 seam_position = nearest

-skirt_distance = 5
+skirt_distance = 6

 skirt_height = 1
 skirt_height = 1

-skirts = 2
-small_perimeter_speed = 20
+skirts = 1
+small_perimeter_speed = 15

 solid_infill_below_area = 30
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
 solid_infill_below_area = 30
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0

-solid_infill_speed = 80
+solid_infill_speed = 60

 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0

-support_material_contact_distance = 0
+support_material_contact_distance = 0.2

 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1

-support_material_interface_layers = 0
+support_material_interface_layers = 3

 support_material_interface_spacing = 0
 support_material_interface_spacing = 0

-support_material_interface_speed = 100%
+support_material_interface_speed = 40

 support_material_pattern = rectilinear
 support_material_spacing = 2.5
 support_material_pattern = rectilinear
 support_material_spacing = 2.5

-support_material_speed = 40
-support_material_threshold = 45
+support_material_speed = 60
+support_material_threshold = 0

 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0

-top_solid_infill_speed = 20
+top_solid_infill_speed = 40

 top_solid_layers = 4
 top_solid_layers = 4

-travel_speed = 100
+travel_speed = 130

 xy_size_compensation = 0
 
 [print:MendelPro]
 xy_size_compensation = 0
 
 [print:MendelPro]


@@ -374,7 +248,7 @@ default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 20
+external_perimeter_speed = 30

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20


@@ -418,7 +292,7 @@ resolution = 0
 seam_position = nearest
 skirt_distance = 10
 skirt_height = 1
 seam_position = nearest
 skirt_distance = 10
 skirt_height = 1

-skirts = 2
+skirts = 1

 small_perimeter_speed = 10
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 small_perimeter_speed = 10
 solid_infill_below_area = 70
 solid_infill_every_layers = 0


@@ -505,7 +379,7 @@ resolution = 0
 seam_position = nearest
 skirt_distance = 1
 skirt_height = 1
 seam_position = nearest
 skirt_distance = 1
 skirt_height = 1

-skirts = 2
+skirts = 1

 small_perimeter_speed = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 small_perimeter_speed = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0


@@ -592,7 +466,7 @@ resolution = 0
 seam_position = aligned
 skirt_distance = 1
 skirt_height = 1
 seam_position = aligned
 skirt_distance = 1
 skirt_height = 1

-skirts = 2
+skirts = 1

 small_perimeter_speed = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 small_perimeter_speed = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0


@@ -623,19 +497,19 @@ top_solid_layers = 0
 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 

-[print:prusa i3 200]
-avoid_crossing_perimeters = 1
+[print:prusa i3]
+avoid_crossing_perimeters = 0

 bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40
 bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40

-brim_width = 1
+brim_width = 0

 complete_objects = 0
 complete_objects = 0

-default_acceleration = 0
+default_acceleration = 1000

 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 20
+external_perimeter_speed = 30

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20


@@ -647,7 +521,7 @@ fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2

-first_layer_speed = 15
+first_layer_speed = 10

 gap_fill_speed = 20
 gcode_comments = 0
 infill_acceleration = 0
 gap_fill_speed = 20
 gcode_comments = 0
 infill_acceleration = 0


@@ -657,10 +531,10 @@ infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%

-infill_speed = 0
+infill_speed = 80

 interface_shells = 0
 layer_height = 0.2
 interface_shells = 0
 layer_height = 0.2

-max_print_speed = 50
+max_print_speed = 100

 max_volumetric_speed = 0
 min_skirt_length = 3
 notes = 
 max_volumetric_speed = 0
 min_skirt_length = 3
 notes = 


@@ -671,7 +545,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0

-perimeter_speed = 40
+perimeter_speed = 60

 perimeters = 3
 post_process = 
 raft_layers = 0
 perimeters = 3
 post_process = 
 raft_layers = 0


@@ -679,16 +553,16 @@ resolution = 0
 seam_position = nearest
 skirt_distance = 6
 skirt_height = 1
 seam_position = nearest
 skirt_distance = 6
 skirt_height = 1

-skirts = 2
+skirts = 1

 small_perimeter_speed = 15
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
 small_perimeter_speed = 15
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0

-solid_infill_speed = 0
+solid_infill_speed = 60

 spiral_vase = 0
 standby_temperature_delta = -5
 spiral_vase = 0
 standby_temperature_delta = -5

-support_material = 0
+support_material = 1

 support_material_angle = 0
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_angle = 0
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0


@@ -697,106 +571,19 @@ support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 3
 support_material_interface_spacing = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 3
 support_material_interface_spacing = 0

-support_material_interface_speed = 10
+support_material_interface_speed = 75%

 support_material_pattern = pillars
 support_material_spacing = 2.5
 support_material_pattern = pillars
 support_material_spacing = 2.5

-support_material_speed = 40
-support_material_threshold = 40
+support_material_speed = 60
+support_material_threshold = 0

 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0

-top_solid_infill_speed = 20
+top_solid_infill_speed = 30

 top_solid_layers = 4
 travel_speed = 100
 xy_size_compensation = 0
 
 top_solid_layers = 4
 travel_speed = 100
 xy_size_compensation = 0
 

-[print:prusa i3 vase]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 0
-bridge_acceleration = 0
-bridge_flow_ratio = 1
-bridge_speed = 40
-brim_width = 1
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 0%
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.2
-first_layer_speed = 15
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 1
-infill_only_where_needed = 0
-infill_overlap = 15%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 65
-max_volumetric_speed = 0
-min_skirt_length = 1
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 40
-perimeters = 1
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 1
-skirt_height = 1
-skirts = 2
-small_perimeter_speed = 20
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 60
-spiral_vase = 1
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 10
-support_material_pattern = pillars
-support_material_spacing = 2.5
-support_material_speed = 40
-support_material_threshold = 40
-thin_walls = 1
-threads = 2
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 0
-travel_speed = 100
-xy_size_compensation = 0
-

 [printer:Lulzbot]
 bed_shape = 0x0,298x0,298x275,0x275
 before_layer_gcode = 
 [printer:Lulzbot]
 bed_shape = 0x0,298x0,298x275,0x275
 before_layer_gcode =