projects / stratum0-wiki.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | tree
raw | inline | side by side
/* OpenStreetMap */ Termine
[stratum0-wiki.git] / 3D-Drucker%2FSlicerBundle.ini.mw
diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw
index 1bb1a22..bca5b64 100644 (file)
--- a/3D-Drucker%2FSlicerBundle.ini.mw
+++ b/3D-Drucker%2FSlicerBundle.ini.mw
@@ -1,179 +1,215 @@
-# generated by Slic3r 1.2.9 on Thu May 19 15:50:57 2016
+# generated by Slic3r 1.2.9 on Mon Jan 30 16:49:14 2017
 
 
-[filament:Lulzbot PLA Weiß]
+[filament:1.75mm ABS]
+bed_temperature = 0
+bridge_fan_speed = 35
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 1.75
+first_layer_bed_temperature = 0
+first_layer_temperature = 250
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 230
+
+[filament:1.75mm Holz]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
-fan_always_on = 0
+fan_always_on = 1
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
-filament_diameter = 2.85
-first_layer_bed_temperature = 55
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
 first_layer_temperature = 200
 max_fan_speed = 100
 first_layer_temperature = 200
 max_fan_speed = 100
-min_fan_speed = 30
-min_print_speed = 10
-slowdown_below_layer_time = 20
+min_fan_speed = 50
+min_print_speed = 5
+slowdown_below_layer_time = 10
 temperature = 190
 
 temperature = 190
 
-[filament:MendelPro ABS]
-bed_temperature = 0
+[filament:1.75mm PLA]
+bed_temperature = 50
 bridge_fan_speed = 100
 bridge_fan_speed = 100
-cooling = 0
-disable_fan_first_layers = 1
+cooling = 1
+disable_fan_first_layers = 3
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
-filament_diameter = 1.7
-first_layer_bed_temperature = 0
-first_layer_temperature = 250
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 220
 max_fan_speed = 100
 max_fan_speed = 100
-min_fan_speed = 50
+min_fan_speed = 100
 min_print_speed = 5
 min_print_speed = 5
-slowdown_below_layer_time = 30
-temperature = 245
+slowdown_below_layer_time = 20
+temperature = 190
 
 
-[filament:MendelPro Holz]
-bed_temperature = 50
+[filament:1.75mm PLA TinyBoy]
+bed_temperature = 0
 bridge_fan_speed = 100
 cooling = 1
 bridge_fan_speed = 100
 cooling = 1
-disable_fan_first_layers = 1
+disable_fan_first_layers = 2
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
-filament_colour = #FFFFFF
-filament_diameter = 1.7
-first_layer_bed_temperature = 55
+filament_colour = #FF8000
+filament_diameter = 1.75
+first_layer_bed_temperature = 0
 first_layer_temperature = 200
 first_layer_temperature = 200
-max_fan_speed = 100
-min_fan_speed = 50
+max_fan_speed = 40
+min_fan_speed = 35
 min_print_speed = 5
 min_print_speed = 5
-slowdown_below_layer_time = 30
-temperature = 185
+slowdown_below_layer_time = 10
+temperature = 200
 
 
-[filament:MendelPro PLA]
-bed_temperature = 50
+[filament:2.70mm PLA]
+bed_temperature = 60
 bridge_fan_speed = 100
 cooling = 1
 bridge_fan_speed = 100
 cooling = 1
-disable_fan_first_layers = 1
+disable_fan_first_layers = 3
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
-filament_colour = #FFFFFF
-filament_diameter = 1.7
-first_layer_bed_temperature = 50
-first_layer_temperature = 200
+filament_colour = #FF00FF
+filament_diameter = 2.72
+first_layer_bed_temperature = 60
+first_layer_temperature = 220
 max_fan_speed = 100
 max_fan_speed = 100
-min_fan_speed = 50
+min_fan_speed = 100
 min_print_speed = 5
 min_print_speed = 5
-slowdown_below_layer_time = 30
-temperature = 180
+slowdown_below_layer_time = 20
+temperature = 200
 
 
-[filament:MendelPro PLA fast]
-bed_temperature = 50
+[filament:2.80mm PETG ]
+bed_temperature = 75
 bridge_fan_speed = 100
 cooling = 1
 bridge_fan_speed = 100
 cooling = 1
-disable_fan_first_layers = 1
+disable_fan_first_layers = 3
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
-filament_colour = #FFFFFF
-filament_diameter = 1.7
-first_layer_bed_temperature = 50
-first_layer_temperature = 200
+filament_colour = #B1EB96
+filament_diameter = 2.8
+first_layer_bed_temperature = 75
+first_layer_temperature = 245
 max_fan_speed = 100
 max_fan_speed = 100
-min_fan_speed = 50
+min_fan_speed = 100
 min_print_speed = 5
 min_print_speed = 5
-slowdown_below_layer_time = 30
-temperature = 100
+slowdown_below_layer_time = 10
+temperature = 235
 
 
-[filament:TinyBoy PLA]
-bed_temperature = 0
+[filament:2.85mm ABS]
+bed_temperature = 100
+bridge_fan_speed = 35
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #FFFFFF
+filament_diameter = 2.85
+first_layer_bed_temperature = 100
+first_layer_temperature = 250
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 235
+
+[filament:2.85mm PETG ]
+bed_temperature = 75
 bridge_fan_speed = 100
 cooling = 1
 bridge_fan_speed = 100
 cooling = 1
-disable_fan_first_layers = 2
-extrusion_multiplier = 0.9
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 fan_always_on = 1
 fan_below_layer_time = 60
-filament_colour = #35E1FF
-filament_diameter = 1.7
-first_layer_bed_temperature = 0
-first_layer_temperature = 200
-max_fan_speed = 50
-min_fan_speed = 35
+filament_colour = #B1EB96
+filament_diameter = 2.85
+first_layer_bed_temperature = 75
+first_layer_temperature = 245
+max_fan_speed = 100
+min_fan_speed = 100
 min_print_speed = 5
 min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 185
+slowdown_below_layer_time = 10
+temperature = 235
 
 
-[filament:prusa i3 PLA black fine]
-bed_temperature = 50
+[filament:2.85mm PLA]
+bed_temperature = 60
 bridge_fan_speed = 100
 cooling = 1
 bridge_fan_speed = 100
 cooling = 1
-disable_fan_first_layers = 1
+disable_fan_first_layers = 3
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
-filament_colour = #FF0000
-filament_diameter = 2.9
-first_layer_bed_temperature = 50
-first_layer_temperature = 200
+filament_colour = #FF00FF
+filament_diameter = 2.85
+first_layer_bed_temperature = 60
+first_layer_temperature = 220
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 5
 max_fan_speed = 100
 min_fan_speed = 100
 min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 200
+slowdown_below_layer_time = 20
+temperature = 195
 
 
-[filament:prusa i3 PLA igus]
-bed_temperature = 50
+[filament:2.85mm PLA hot]
+bed_temperature = 60
 bridge_fan_speed = 100
 bridge_fan_speed = 100
-cooling = 0
+cooling = 1
 disable_fan_first_layers = 1
 disable_fan_first_layers = 1
-extrusion_multiplier = 0.9
-fan_always_on = 0
+extrusion_multiplier = 1
+fan_always_on = 1
 fan_below_layer_time = 60
 fan_below_layer_time = 60
-filament_colour = #D0C9B0
-filament_diameter = 2.9
-first_layer_bed_temperature = 50
-first_layer_temperature = 250
+filament_colour = #FF00FF
+filament_diameter = 2.85
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
 max_fan_speed = 100
 max_fan_speed = 100
-min_fan_speed = 35
+min_fan_speed = 100
 min_print_speed = 5
 min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 250
+slowdown_below_layer_time = 10
+temperature = 215
 
 
-[filament:prusa i3 PLA lila]
-bed_temperature = 50
+[filament:2.85mm Willowflex]
+bed_temperature = 70
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
-filament_colour = #8000FF
-filament_diameter = 3
-first_layer_bed_temperature = 50
-first_layer_temperature = 200
+filament_colour = #BF0005
+filament_diameter = 2.85
+first_layer_bed_temperature = 70
+first_layer_temperature = 160
 max_fan_speed = 100
 max_fan_speed = 100
-min_fan_speed = 35
+min_fan_speed = 50
 min_print_speed = 5
 min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 200
+slowdown_below_layer_time = 20
+temperature = 160
 
 [presets]
 
 [presets]
-filament = MendelPro PLA fast.ini
-print = MendelPro.ini
+filament = 2.80mm PETG .ini
+print = Lulzbot.ini
 printer = MendelPro.ini
 
 [print:Lulzbot]
 printer = MendelPro.ini
 
 [print:Lulzbot]
-avoid_crossing_perimeters = 1
+avoid_crossing_perimeters = 0
 bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_flow_ratio = 1
-bridge_speed = 40
-brim_width = 0
+bridge_speed = 60
+brim_width = 2
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
@@ -185,37 +221,37 @@ extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
-fill_angle = 35
-fill_density = 30%
-fill_pattern = line
+fill_angle = 45
+fill_density = 20%
+fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
-first_layer_speed = 10
+first_layer_speed = 20
 gap_fill_speed = 20
 gcode_comments = 0
 infill_acceleration = 0
 gap_fill_speed = 20
 gcode_comments = 0
 infill_acceleration = 0
-infill_every_layers = 2
+infill_every_layers = 1
 infill_extruder = 1
 infill_extruder = 1
-infill_extrusion_width = 0
+infill_extrusion_width = 1.1
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
-infill_speed = 0
+infill_speed = 60
 interface_shells = 0
 interface_shells = 0
-layer_height = 0.25
-max_print_speed = 80
+layer_height = 0.2
+max_print_speed = 130
 max_volumetric_speed = 0
 max_volumetric_speed = 0
-min_skirt_length = 0
+min_skirt_length = 1
 notes = 
 notes = 
-only_retract_when_crossing_perimeters = 0
+only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
 overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
 overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 0
+perimeter_speed = 60
 perimeters = 3
 post_process = 
 raft_layers = 0
 perimeters = 3
 post_process = 
 raft_layers = 0
@@ -223,63 +259,63 @@ resolution = 0
 seam_position = aligned
 skirt_distance = 6
 skirt_height = 1
 seam_position = aligned
 skirt_distance = 6
 skirt_height = 1
-skirts = 2
-small_perimeter_speed = 30
-solid_infill_below_area = 30
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 0
+solid_infill_speed = 10
 spiral_vase = 0
 standby_temperature_delta = -5
 spiral_vase = 0
 standby_temperature_delta = -5
-support_material = 0
+support_material = 1
 support_material_angle = 0
 support_material_angle = 0
-support_material_contact_distance = 0.2
+support_material_contact_distance = 0.4
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 0
+support_material_interface_layers = 3
 support_material_interface_spacing = 0
 support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_speed = 0
-support_material_threshold = 45
-thin_walls = 1
+support_material_interface_speed = 30
+support_material_pattern = rectilinear-grid
+support_material_spacing = 2
+support_material_speed = 60
+support_material_threshold = 0
+thin_walls = 0
 threads = 2
 top_infill_extrusion_width = 0
 threads = 2
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 0
-top_solid_layers = 4
-travel_speed = 100
+top_solid_infill_speed = 5
+top_solid_layers = 5
+travel_speed = 130
 xy_size_compensation = 0
 
 [print:MendelPro]
 xy_size_compensation = 0
 
 [print:MendelPro]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 5
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40
-brim_width = 0
+brim_width = 2
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
+external_perimeter_speed = 30
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
-fill_density = 15%
+fill_density = 20%
 fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
-first_layer_speed = 10
-gap_fill_speed = 10
+first_layer_speed = 30
+gap_fill_speed = 20
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
@@ -287,13 +323,13 @@ infill_extruder = 1
 infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
-infill_overlap = 15%
-infill_speed = 0
+infill_overlap = 25%
+infill_speed = 50
 interface_shells = 0
 layer_height = 0.2
 max_print_speed = 80
 max_volumetric_speed = 0
 interface_shells = 0
 layer_height = 0.2
 max_print_speed = 80
 max_volumetric_speed = 0
-min_skirt_length = 2
+min_skirt_length = 6
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
@@ -302,46 +338,46 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 0
-perimeters = 2
+perimeter_speed = 50
+perimeters = 3
 post_process = 
 raft_layers = 0
 resolution = 0
 post_process = 
 raft_layers = 0
 resolution = 0
-seam_position = aligned
-skirt_distance = 1
+seam_position = nearest
+skirt_distance = 6
 skirt_height = 1
 skirts = 1
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 10
+small_perimeter_speed = 20
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 0
+solid_infill_speed = 40
 spiral_vase = 0
 standby_temperature_delta = -5
 spiral_vase = 0
 standby_temperature_delta = -5
-support_material = 0
+support_material = 1
 support_material_angle = 0
 support_material_angle = 0
-support_material_contact_distance = 0.2
+support_material_contact_distance = 0.4
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 2
+support_material_interface_layers = 3
 support_material_interface_spacing = 0
 support_material_interface_spacing = 0
-support_material_interface_speed = 100%
+support_material_interface_speed = 40
 support_material_pattern = rectilinear
 support_material_pattern = rectilinear
-support_material_spacing = 5
-support_material_speed = 0
-support_material_threshold = 40
+support_material_spacing = 3
+support_material_speed = 50
+support_material_threshold = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 3
+top_solid_infill_speed = 40
+top_solid_layers = 5
 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:MendelPro fast]
+[print:TinyBoy]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -360,13 +396,13 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
-fill_density = 15%
-fill_pattern = rectilinear
+fill_density = 20%
+fill_pattern = 3dhoneycomb
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_speed = 10
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_speed = 10
-gap_fill_speed = 10
+gap_fill_speed = 20
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
@@ -377,10 +413,10 @@ infill_only_where_needed = 0
 infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0
 infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0
-layer_height = 0.5
+layer_height = 0.2
 max_print_speed = 80
 max_volumetric_speed = 0
 max_print_speed = 80
 max_volumetric_speed = 0
-min_skirt_length = 2
+min_skirt_length = 1
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
@@ -394,11 +430,11 @@ perimeters = 2
 post_process = 
 raft_layers = 0
 resolution = 0
 post_process = 
 raft_layers = 0
 resolution = 0
-seam_position = aligned
+seam_position = nearest
 skirt_distance = 1
 skirt_height = 1
 skirts = 1
 skirt_distance = 1
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 10
+small_perimeter_speed = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
@@ -424,13 +460,13 @@ thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 20
 threads = 2
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 20
-top_solid_layers = 3
+top_solid_layers = 4
 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:TinyBoy]
+[print:Toy]
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
+bottom_solid_layers = 2
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 0
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 0
@@ -447,12 +483,12 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
-fill_density = 15%
+fill_density = 0%
 fill_pattern = rectilinear
 first_layer_acceleration = 0
 fill_pattern = rectilinear
 first_layer_acceleration = 0
-first_layer_extrusion_width = 150%
+first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_height = 0.2
-first_layer_speed = 20
+first_layer_speed = 10
 gap_fill_speed = 0
 gcode_comments = 0
 infill_acceleration = 0
 gap_fill_speed = 0
 gcode_comments = 0
 infill_acceleration = 0
@@ -465,7 +501,7 @@ infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0
 layer_height = 0.2
 infill_speed = 0
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 50
+max_print_speed = 10
 max_volumetric_speed = 0
 min_skirt_length = 1
 notes = 
 max_volumetric_speed = 0
 min_skirt_length = 1
 notes = 
@@ -493,14 +529,14 @@ solid_infill_extrusion_width = 0
 solid_infill_speed = 0
 spiral_vase = 0
 standby_temperature_delta = -5
 solid_infill_speed = 0
 spiral_vase = 0
 standby_temperature_delta = -5
-support_material = 0
+support_material = 1
 support_material_angle = 0
 support_material_angle = 0
-support_material_contact_distance = 0.2
+support_material_contact_distance = 0.3
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 2
+support_material_interface_layers = 3
 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
@@ -511,13 +547,13 @@ thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 0
 threads = 2
 top_infill_extrusion_width = 0
 top_solid_infill_speed = 0
-top_solid_layers = 3
+top_solid_layers = 0
 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:prusa i3 100]
+[print:prusa i3]
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
+bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40
@@ -527,7 +563,7 @@ default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
-external_perimeter_speed = 10
+external_perimeter_speed = 30
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -535,26 +571,26 @@ extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
-fill_pattern = rectilinear
+fill_pattern = honeycomb
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
-first_layer_height = 0.2
+first_layer_height = 0.3
 first_layer_speed = 10
 first_layer_speed = 10
-gap_fill_speed = 10
+gap_fill_speed = 20
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 110%
+infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
-infill_speed = 0
+infill_speed = 80
 interface_shells = 0
 interface_shells = 0
-layer_height = 0.1
-max_print_speed = 80
+layer_height = 0.15
+max_print_speed = 100
 max_volumetric_speed = 0
 max_volumetric_speed = 0
-min_skirt_length = 1
+min_skirt_length = 3
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
@@ -563,232 +599,58 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 0
+perimeter_speed = 60
 perimeters = 3
 post_process = 
 raft_layers = 0
 resolution = 0
 perimeters = 3
 post_process = 
 raft_layers = 0
 resolution = 0
-seam_position = aligned
+seam_position = nearest
 skirt_distance = 6
 skirt_height = 1
 skirt_distance = 6
 skirt_height = 1
-skirts = 3
-small_perimeter_speed = 10
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 0
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 5
-support_material_speed = 0
-support_material_threshold = 40
-thin_walls = 1
-threads = 2
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 10
-top_solid_layers = 3
-travel_speed = 100
-xy_size_compensation = 0
-
-[print:prusa i3 250]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_flow_ratio = 1
-bridge_speed = 40
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 10
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 20%
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.2
-first_layer_speed = 15
-gap_fill_speed = 10
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 110%
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 15%
-infill_speed = 0
-interface_shells = 0
-layer_height = 0.25
-max_print_speed = 60
-max_volumetric_speed = 0
-min_skirt_length = 1
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 0
-perimeters = 2
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-skirt_distance = 1
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 10
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 0
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 5
-support_material_speed = 0
-support_material_threshold = 40
-thin_walls = 1
-threads = 2
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 3
-travel_speed = 100
-xy_size_compensation = 0
-
-[print:prusa i3 400]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0
-fill_angle = 45
-fill_density = 20%
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.2
-first_layer_speed = 10
-gap_fill_speed = 10
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 110%
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 15%
-infill_speed = 0
-interface_shells = 0
-layer_height = 0.4
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 1
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 0
-perimeters = 2
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-skirt_distance = 1
-skirt_height = 1
 skirts = 1
 skirts = 1
-small_perimeter_speed = 10
+small_perimeter_speed = 15
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 0
+solid_infill_speed = 40
 spiral_vase = 0
 standby_temperature_delta = -5
 spiral_vase = 0
 standby_temperature_delta = -5
-support_material = 0
+support_material = 1
 support_material_angle = 0
 support_material_angle = 0
-support_material_contact_distance = 0.2
+support_material_contact_distance = 0.3
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 2
+support_material_interface_layers = 3
 support_material_interface_spacing = 0
 support_material_interface_spacing = 0
-support_material_interface_speed = 100%
+support_material_interface_speed = 40
 support_material_pattern = rectilinear
 support_material_pattern = rectilinear
-support_material_spacing = 5
-support_material_speed = 0
-support_material_threshold = 40
+support_material_spacing = 3
+support_material_speed = 40
+support_material_threshold = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 3
+top_solid_infill_speed = 30
+top_solid_layers = 4
 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:prusa i3 400 sup]
+[print:prusa i3 test]
 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
+bottom_solid_layers = 4
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_acceleration = 0
 bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
+bridge_speed = 40
+brim_width = 5
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
+external_perimeter_speed = 30
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
@@ -796,12 +658,12 @@ extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
-fill_pattern = rectilinear
+fill_pattern = honeycomb
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_speed = 10
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_speed = 10
-gap_fill_speed = 10
+gap_fill_speed = 20
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
@@ -810,12 +672,12 @@ infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
-infill_speed = 0
+infill_speed = 80
 interface_shells = 0
 interface_shells = 0
-layer_height = 0.4
-max_print_speed = 80
+layer_height = 0.2
+max_print_speed = 100
 max_volumetric_speed = 0
 max_volumetric_speed = 0
-min_skirt_length = 1
+min_skirt_length = 3
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
@@ -824,49 +686,49 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 0
-perimeters = 2
+perimeter_speed = 60
+perimeters = 3
 post_process = 
 raft_layers = 0
 resolution = 0
 post_process = 
 raft_layers = 0
 resolution = 0
-seam_position = aligned
-skirt_distance = 1
+seam_position = nearest
+skirt_distance = 6
 skirt_height = 1
 skirts = 1
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 10
+small_perimeter_speed = 15
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 0
+solid_infill_speed = 40
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 1
 support_material_angle = 0
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 1
 support_material_angle = 0
-support_material_contact_distance = 0.3
+support_material_contact_distance = 0
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
-support_material_interface_layers = 2
-support_material_interface_spacing = 2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 5
-support_material_speed = 0
-support_material_threshold = 40
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 40
+support_material_pattern = pillars
+support_material_spacing = 3
+support_material_speed = 40
+support_material_threshold = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 3
+top_solid_infill_speed = 30
+top_solid_layers = 4
 travel_speed = 100
 xy_size_compensation = 0
 
 [printer:Lulzbot]
 bed_shape = 0x0,298x0,298x275,0x275
 before_layer_gcode = 
 travel_speed = 100
 xy_size_compensation = 0
 
 [printer:Lulzbot]
 bed_shape = 0x0,298x0,298x275,0x275
 before_layer_gcode = 
-end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors
+end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors\n\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\n
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
@@ -876,12 +738,12 @@ octoprint_host =
 pressure_advance = 0
 retract_before_travel = 2
 retract_layer_change = 1
 pressure_advance = 0
 retract_before_travel = 2
 retract_layer_change = 1
-retract_length = 1.75
+retract_length = 3
 retract_length_toolchange = 3
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_length_toolchange = 3
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
-retract_speed = 20
+retract_speed = 40
 start_gcode = G28 ; home all axes\n
 toolchange_gcode = 
 use_firmware_retraction = 0
 start_gcode = G28 ; home all axes\n
 toolchange_gcode = 
 use_firmware_retraction = 0
@@ -910,7 +772,7 @@ retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
-start_gcode = G28 Z            ; home Z\nG28 X Y         ; home X Y\n
+start_gcode = G28 Z            ; home Z\nG28 X Y         ; home X Y\nG0   Y40        ; clab move\n
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0
@@ -947,10 +809,38 @@ vibration_limit = 0
 wipe = 0
 z_offset = 0
 
 wipe = 0
 z_offset = 0
 
+[printer:Toyrep]
+bed_shape = 0x0,125x0,125x125,0x125
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off nozzle temperature\nM84 ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 0
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 10
+start_gcode = \n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+
 [printer:prusa i3]
 [printer:prusa i3]
-bed_shape = 0x0,190x0,190x190,0x190
+bed_shape = 0x0,190x0,190x220,0x220
 before_layer_gcode = 
 before_layer_gcode = 
-end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\n\n
+end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\nM81               ; Power off\n\n
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
@@ -959,15 +849,15 @@ octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 octoprint_host = 
 pressure_advance = 0
 retract_before_travel = 2
 octoprint_host = 
 pressure_advance = 0
 retract_before_travel = 2
-retract_layer_change = 1
-retract_length = 5
+retract_layer_change = 0
+retract_length = 2
 retract_length_toolchange = 10
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
 retract_length_toolchange = 10
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
-start_gcode = G28 Z            ; home Z\n\nG28 X Y         ; home X Y\n
-toolchange_gcode = 
+start_gcode = G28 Z             ; home Z\n;G0 Z1            ; lift Z\nG28 X Y         ; home X Y\nG0   Y40        ; clab move
+toolchange_gcode = M83 ; turn on relative movement for extruder  \nG1 E-5  ; retract filament 5mm  \nG1 X10 Y10 Z4.000000  ; home X and Y axis leave Z at current height  \nM84 E ; release extruder stepper motor from 'holding' position  \n@pause ; pause print!  \nG1 E0 ; reset extruder, ready to push out plastic again  \nM82 ; set extruder movement back to absolute ready for next layer  
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 use_volumetric_e = 0
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 use_volumetric_e = 0
Read-only Git mirror of the Stratum 0 wiki at https://stratum0.org/wiki/, updated every 30 minutes
This page took 0.065776 seconds and 4 git commands to generate.