* [[Benutzer:DieLenaMaria|Lena]]
* [[Benutzer:Marylin|Marylin]]
* [[Benutzer:Larsan|Larsan]]
+* [[Benutzer:Stew|Stew]]
+* [[Benutzer:Chrissi^|Chrissi^]]
+* Hanhaiwen
+* [[Benutzer:Matthis|Matthis]]
-Druckführerscheinabsolvierungsundeinweisungsvorgang in Arbeit.
+=== Interessierte Entitäten ===
+* {{Benutzer|Joke}}
+* Lulu-Ann
+* {{Benutzer|Emantor}}
+
+Vereinheitlichter Druckführerscheinabsolvierungsundeinweisungsvorgang ist in Arbeit. (™)
==Logbuch==
Im [[Reprap/Logbuch|Logbuch]] ist eine Liste der bisher gedruckten Teile.
* Skeinforge (Alternative zu Slic3r): http://fabmetheus.crsndoo.com/index.php
-==[[Reprap/Modelle|Modelle]]==
+== Modelle ==
+:''siehe auch Unterseite: [[Reprap/Modelle]]
* Stratum0 Mate name tags - http://www.thingiverse.com/thing:23817
** in der Slic3r-Konfiguration am besten "rectilinear" als Fill Pattern auswählen ("honeycomb" ergibt unschöne eingesunkene Kanten, dort wo die Buchstaben oben zu Ende sind) --[[Benutzer:Daniel Bohrer|Daniel Bohrer]] 23:37, 3. Jun. 2012 (CEST)
* INGA Gehäuse - http://www.thingiverse.com/thing:22450
[[Benutzer:Stew|Stew]] hat eine funktionierende Konfiguration unter [[Reprap/Skeinforge]] eine Kurzanleitung und Konfiguration für Skeinforge abgelegt.
-===[[Reprap/Configs|Konfigurationen für den Slicer]]===
+=== Konfigurationen für den Slicer ===
+:''siehe Unterseite: [[Reprap/Configs]]
Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, mit den hier gelisteten sollte aber ein Druck einigermaßen gelingen.
==== Von larsan ====
-Mit Support etc. aktiviert. In etwa die Config vom Twilight-Druck
<pre style="height:200px;overflow:scroll;">
-# generated by Slic3r 0.9.4-dev on Sat Nov 3 17:46:55 2012
+# generated by Slic3r 0.9.8-dev on Wed Nov 28 08:03:30 2012
acceleration = 0
bed_size = 180,200
-bed_temperature = 60
+bed_temperature = 50
bottom_solid_layers = 3
bridge_fan_speed = 100
-bridge_flow_ratio = 1.05
+bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects =
-cooling = 1
+cooling =
disable_fan_first_layers = 1
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
-external_perimeter_speed = 100%
+external_perimeter_speed = 40%
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 30
extruder_offset = 0x0
extrusion_axis = E
-extrusion_multiplier = 1.02
-extrusion_width = 100%
+extrusion_multiplier = 1
+extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
-fill_angle = 45
-fill_density = 0.25
+fill_angle = 0
+fill_density = 0.15
fill_pattern = honeycomb
-first_layer_bed_temperature = 60
-first_layer_extrusion_width = 90%
-first_layer_height = 95%
-first_layer_speed = 25%
-first_layer_temperature = 200
+first_layer_bed_temperature = 50
+first_layer_extrusion_width = 0
+first_layer_height = 0.27
+first_layer_speed = 15%
+first_layer_temperature = 195
g0 = 0
+gap_fill_speed = 20
gcode_arcs = 0
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 50
infill_every_layers = 1
infill_extruder = 1
-infill_extrusion_width = 120%
-infill_speed = 70
+infill_extrusion_width = 0
+infill_speed = 60
layer_gcode =
-layer_height = 0.3
+layer_height = 0.24
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 5
min_skirt_length = 0
notes = larsanconfig
nozzle_diameter = 0.35
-only_retract_when_crossing_perimeters = 1
-output_filename_format = [timestamp]_[input_filename_base].gcode
+only_retract_when_crossing_perimeters =
+output_filename_format = [input_filename_base].gcode
perimeter_acceleration = 25
perimeter_extruder = 1
perimeter_extrusion_width = 0
-perimeter_speed = 40
-perimeters = 2
+perimeter_speed = 50
+perimeters = 3
post_process =
print_center = 90,100
randomize_start = 1
-retract_before_travel = 4
+retract_before_travel = 5
retract_length = 2
retract_length_toolchange = 3
retract_lift = 0
-retract_restart_extra = 0
+retract_restart_extra = 0.01
retract_restart_extra_toolchange = 0
retract_speed = 50
rotate = 0
scale = 1
-skirt_distance = 10
+skirt_distance = 20
skirt_height = 1
skirts = 3
slowdown_below_layer_time = 50
solid_fill_pattern = rectilinear
solid_infill_below_area = 0
solid_infill_every_layers = 0
-solid_infill_speed = 100%
+solid_infill_speed = 90%
start_gcode = G28 ; home all axes\nM92 E820
-support_material = 1
+support_material =
support_material_angle = 45
support_material_extruder = 1
-support_material_extrusion_width = 160%
+support_material_extrusion_width = 0
support_material_pattern = rectilinear
support_material_spacing = 2
-support_material_threshold = 40
-temperature = 200
+support_material_speed = 60
+support_material_threshold = 41
+temperature = 185
threads = 2
-top_solid_infill_speed = 40%
-top_solid_layers = 2
-travel_speed = 90
+top_solid_infill_speed = 70%
+top_solid_layers = 3
+travel_speed = 50
use_relative_e_distances = 0
-z_offset = 0.20
-
+vibration_limit = 0
+z_offset = 0
</pre>
==== Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ====
+Der erste und letzte Layer wird "normal schnell" gedruckt, die anderen doppelt so schnell. Bei dünnen Strukturen (z.B. Mate-Tags) muss man notfalls noch ein bisschen mit der Perimeteranzahl spielen.
<pre style="height:200px;overflow:scroll;">
-# generated by Slic3r 0.9.4-dev on Tue Oct 23 23:01:34 2012
+# generated by Slic3r 0.9.4-dev on Fri Nov 16 20:55:02 2012
acceleration = 0
bed_size = 180,200
bed_temperature = 60
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
external_perimeter_speed = 90%
-extra_perimeters =
+extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
-fill_angle = 45
-fill_density = 0.3
+fill_angle = 0
+fill_density = 0.2
fill_pattern = rectilinear
first_layer_bed_temperature = 60
first_layer_extrusion_width = 0
-first_layer_height = 120%
+first_layer_height = 100%
first_layer_speed = 20%
first_layer_temperature = 195
g0 = 0
infill_extrusion_width = 0
infill_speed = 120
layer_gcode =
-layer_height = 0.28
+layer_height = 0.25
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
slowdown_below_layer_time = 60
small_perimeter_speed = 80%
solid_fill_pattern = rectilinear
-solid_infill_below_area = 70
+solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_speed = 100%
solid_layers = 3
start_gcode = G28 ; home all axes\nM92 E820
-support_material =
+support_material = 1
support_material_angle = 45
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_pattern = rectilinear
-support_material_spacing = 2.5
+support_material_spacing = 3
support_material_threshold = 45
temperature = 185
threads = 3
-top_solid_infill_speed = 60
+top_solid_infill_speed = 50%
travel_speed = 140
use_relative_e_distances = 0
z_offset = 0.22
</pre>
- [[Kategorie:Infrastruktur]] ·
+
+=== von Chrissi^ ===
+* Nette Konfiguration zum Drucken von allem möglichen.
+* First Layer ist super langsam => Guter Druck auch bei kleinen Strukturen
+* First Layer Extrusion Width 110% => Wenig ''Wellenschlagen'' auf dem ersten Layer
+<pre style="height:200px;overflow:scroll;">
+# generated by Slic3r 0.9.3 on Tue Nov 6 21:53:43 2012
+acceleration = 0
+bed_size = 180,200
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_flow_ratio = 1.05
+bridge_speed = 60
+brim_width = 0
+complete_objects =
+cooling = 1
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
+external_perimeter_speed = 100%
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 30
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 100%
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 0.1
+fill_pattern = rectilinear
+first_layer_bed_temperature = 60
+first_layer_extrusion_width = 112%
+first_layer_height = 95%
+first_layer_speed = 15%
+first_layer_temperature = 200
+g0 = 0
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 120%
+infill_speed = 60
+layer_gcode =
+layer_height = 0.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 5
+notes = larsanconfig
+nozzle_diameter = 0.35
+only_retract_when_crossing_perimeters = 1
+output_filename_format = [timestamp]_[input_filename_base].gcode
+perimeter_acceleration = 25
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 60
+perimeters = 2
+post_process =
+print_center = 120,120
+randomize_start = 1
+retract_before_travel = 4
+retract_length = 2
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+rotate = 0
+scale = 1
+skirt_distance = 10
+skirt_height = 1
+skirts = 3
+slowdown_below_layer_time = 50
+small_perimeter_speed = 50%
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_speed = 100%
+solid_layers = 3
+start_gcode = G28 ; home all axes\nM92 E820
+support_material = 1
+support_material_angle = 45
+support_material_extruder = 1
+support_material_extrusion_width = 160%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_threshold = 40
+temperature = 205
+threads = 2
+top_solid_infill_speed = 40%
+travel_speed = 90
+use_relative_e_distances = 0
+z_offset = 0
+</pre>
+
+[[Kategorie:Infrastruktur]]
+[[Kategorie:RepRap]]
+[[Kategorie:Projekte]]
+
+== Pronterface ==
+=== Während des Drucks ===
+Während des Drucks kann mit dem G-Code M220 die Geschwindigkeit aller Druckoperationen geändert werden:
+ M220 S<Speed>
+Wobei <Speed> der Faktor in Prozent ist.
+ M220 S200
+erhöht die Druckgeschwindigkeit also um 100%.
projects / stratum0-wiki.git / blobdiff