1 Termine ins Archiv verschoben

[stratum0-wiki.git] / 3D-Drucker%2FSlicerBundle.ini.mw

diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw
index ba07e00..bca5b64 100644 (file)
--- a/3D-Drucker%2FSlicerBundle.ini.mw
+++ b/3D-Drucker%2FSlicerBundle.ini.mw
@@ -1,218 +1,308 @@
-# generated by Slic3r 1.2.9 on Mon May  9 21:40:16 2016
+# generated by Slic3r 1.2.9 on Mon Jan 30 16:49:14 2017

 
 

-[filament:LULZBOT PLA]
-bed_temperature = 50
-bridge_fan_speed = 100
+[filament:1.75mm ABS]
+bed_temperature = 0
+bridge_fan_speed = 35

 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
 cooling = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #FFFFFF

-filament_diameter = 2.89
-first_layer_bed_temperature = 55
-first_layer_temperature = 190
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 25
-slowdown_below_layer_time = 25
-temperature = 185
+filament_diameter = 1.75
+first_layer_bed_temperature = 0
+first_layer_temperature = 250
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 230

 
 

-[filament:MendelPro ABS]
-bed_temperature = 0
+[filament:1.75mm Holz]
+bed_temperature = 50

 bridge_fan_speed = 100
 bridge_fan_speed = 100

-cooling = 0
+cooling = 1

 disable_fan_first_layers = 1
 extrusion_multiplier = 1
 disable_fan_first_layers = 1
 extrusion_multiplier = 1

-fan_always_on = 0
+fan_always_on = 1

 fan_below_layer_time = 60
 filament_colour = #FFFFFF
 fan_below_layer_time = 60
 filament_colour = #FFFFFF

-filament_diameter = 1.7
-first_layer_bed_temperature = 0
-first_layer_temperature = 250
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 200

 max_fan_speed = 100
 min_fan_speed = 50
 min_print_speed = 5
 max_fan_speed = 100
 min_fan_speed = 50
 min_print_speed = 5

-slowdown_below_layer_time = 30
-temperature = 245
+slowdown_below_layer_time = 10
+temperature = 190

 
 

-[filament:MendelPro PLA]
+[filament:1.75mm PLA]

 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1

-disable_fan_first_layers = 1
+disable_fan_first_layers = 3

 extrusion_multiplier = 1
 extrusion_multiplier = 1

-fan_always_on = 1
+fan_always_on = 0

 fan_below_layer_time = 60
 filament_colour = #FFFFFF
 fan_below_layer_time = 60
 filament_colour = #FFFFFF

-filament_diameter = 1.7
-first_layer_bed_temperature = 55
-first_layer_temperature = 200
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 220

 max_fan_speed = 100
 max_fan_speed = 100

-min_fan_speed = 50
+min_fan_speed = 100

 min_print_speed = 5
 min_print_speed = 5

-slowdown_below_layer_time = 30
-temperature = 180
+slowdown_below_layer_time = 20
+temperature = 190

 
 

-[filament:TinyBoy PLA]
+[filament:1.75mm PLA TinyBoy]

 bed_temperature = 0
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 2
 bed_temperature = 0
 bridge_fan_speed = 100
 cooling = 1
 disable_fan_first_layers = 2

-extrusion_multiplier = 0.9
+extrusion_multiplier = 1

 fan_always_on = 1
 fan_below_layer_time = 60
 fan_always_on = 1
 fan_below_layer_time = 60

-filament_colour = #35E1FF
-filament_diameter = 1.7
+filament_colour = #FF8000
+filament_diameter = 1.75

 first_layer_bed_temperature = 0
 first_layer_temperature = 200
 first_layer_bed_temperature = 0
 first_layer_temperature = 200

-max_fan_speed = 50
+max_fan_speed = 40

 min_fan_speed = 35
 min_print_speed = 5
 min_fan_speed = 35
 min_print_speed = 5

-slowdown_below_layer_time = 15
-temperature = 185
+slowdown_below_layer_time = 10
+temperature = 200

 
 

-[filament:prusa i3 ABS black]
-bed_temperature = 0
+[filament:2.70mm PLA]
+bed_temperature = 60

 bridge_fan_speed = 100
 bridge_fan_speed = 100

-cooling = 0
-disable_fan_first_layers = 2
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #FF00FF
+filament_diameter = 2.72
+first_layer_bed_temperature = 60
+first_layer_temperature = 220
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 20
+temperature = 200
+
+[filament:2.80mm PETG ]
+bed_temperature = 75
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #B1EB96
+filament_diameter = 2.8
+first_layer_bed_temperature = 75
+first_layer_temperature = 245
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 235
+
+[filament:2.85mm ABS]
+bed_temperature = 100
+bridge_fan_speed = 35
+cooling = 1
+disable_fan_first_layers = 1

 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #FFFFFF
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_colour = #FFFFFF

-filament_diameter = 2.8
-first_layer_bed_temperature = 0
+filament_diameter = 2.85
+first_layer_bed_temperature = 100

 first_layer_temperature = 250
 first_layer_temperature = 250

+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 235
+
+[filament:2.85mm PETG ]
+bed_temperature = 75
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #B1EB96
+filament_diameter = 2.85
+first_layer_bed_temperature = 75
+first_layer_temperature = 245

 max_fan_speed = 100
 max_fan_speed = 100

-min_fan_speed = 35
+min_fan_speed = 100

 min_print_speed = 5
 min_print_speed = 5

-slowdown_below_layer_time = 15
-temperature = 245
+slowdown_below_layer_time = 10
+temperature = 235

 
 

-[filament:prusa i3 PLA klar orange]
-bed_temperature = 50
+[filament:2.85mm PLA]
+bed_temperature = 60

 bridge_fan_speed = 100
 cooling = 1
 bridge_fan_speed = 100
 cooling = 1

-disable_fan_first_layers = 2
+disable_fan_first_layers = 3

 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 60

-filament_colour = #FFFFFF
-filament_diameter = 2.6
-first_layer_bed_temperature = 50
-first_layer_temperature = 190
+filament_colour = #FF00FF
+filament_diameter = 2.85
+first_layer_bed_temperature = 60
+first_layer_temperature = 220

 max_fan_speed = 100
 max_fan_speed = 100

-min_fan_speed = 35
+min_fan_speed = 100

 min_print_speed = 5
 min_print_speed = 5

-slowdown_below_layer_time = 15
-temperature = 200
+slowdown_below_layer_time = 20
+temperature = 195
+
+[filament:2.85mm PLA hot]
+bed_temperature = 60
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #FF00FF
+filament_diameter = 2.85
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 215
+
+[filament:2.85mm Willowflex]
+bed_temperature = 70
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #BF0005
+filament_diameter = 2.85
+first_layer_bed_temperature = 70
+first_layer_temperature = 160
+max_fan_speed = 100
+min_fan_speed = 50
+min_print_speed = 5
+slowdown_below_layer_time = 20
+temperature = 160

 
 [presets]
 
 [presets]

-filament = TinyBoy PLA.ini
-print = TinyBoy.ini
-printer = prusa i3.ini
+filament = 2.80mm PETG .ini
+print = Lulzbot.ini
+printer = MendelPro.ini

 
 

-[print:LULZBOT]
+[print:Lulzbot]

 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters = 0

-bottom_solid_layers = 3
-bridge_acceleration = 2000
+bottom_solid_layers = 4
+bridge_acceleration = 0

 bridge_flow_ratio = 1
 bridge_flow_ratio = 1

-bridge_speed = 72
-brim_width = 0
+bridge_speed = 60
+brim_width = 2

 complete_objects = 0
 complete_objects = 0

-default_acceleration = 2000
+default_acceleration = 0

 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 45
+external_perimeter_speed = 30

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20

-extrusion_width = 0.42
+extrusion_width = 0

 fill_angle = 45
 fill_density = 20%
 fill_pattern = rectilinear
 fill_angle = 45
 fill_density = 20%
 fill_pattern = rectilinear

-first_layer_acceleration = 2000
-first_layer_extrusion_width = 0.53
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0

 first_layer_height = 0.2
 first_layer_height = 0.2

-first_layer_speed = 75%
-gap_fill_speed = 55
+first_layer_speed = 20
+gap_fill_speed = 20

 gcode_comments = 0
 gcode_comments = 0

-infill_acceleration = 2000
+infill_acceleration = 0

 infill_every_layers = 1
 infill_extruder = 1
 infill_every_layers = 1
 infill_extruder = 1

-infill_extrusion_width = 0.68
+infill_extrusion_width = 1.1

 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%

-infill_speed = 80
+infill_speed = 60

 interface_shells = 0
 layer_height = 0.2
 interface_shells = 0
 layer_height = 0.2

-max_print_speed = 80
+max_print_speed = 130

 max_volumetric_speed = 0
 max_volumetric_speed = 0

-min_skirt_length = 0
+min_skirt_length = 1

 notes = 
 notes = 

-only_retract_when_crossing_perimeters = 0
+only_retract_when_crossing_perimeters = 1

 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
 overhangs = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base].gcode
 overhangs = 1

-perimeter_acceleration = 1200
+perimeter_acceleration = 0

 perimeter_extruder = 1
 perimeter_extruder = 1

-perimeter_extrusion_width = 0.38
-perimeter_speed = 75
-perimeters = 2
+perimeter_extrusion_width = 0
+perimeter_speed = 60
+perimeters = 3

 post_process = 
 raft_layers = 0
 post_process = 
 raft_layers = 0

-resolution = 0.001
+resolution = 0

 seam_position = aligned
 skirt_distance = 6
 skirt_height = 1
 seam_position = aligned
 skirt_distance = 6
 skirt_height = 1

-skirts = 3
-small_perimeter_speed = 50
-solid_infill_below_area = 90
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 70

 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_every_layers = 0
 solid_infill_extruder = 1

-solid_infill_extrusion_width = 0.5
-solid_infill_speed = 75
+solid_infill_extrusion_width = 0
+solid_infill_speed = 10

 spiral_vase = 0
 standby_temperature_delta = -5
 spiral_vase = 0
 standby_temperature_delta = -5

-support_material = 0
+support_material = 1

 support_material_angle = 0
 support_material_angle = 0

-support_material_contact_distance = 0.2
+support_material_contact_distance = 0.4

 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1

-support_material_interface_layers = 0
+support_material_interface_layers = 3

 support_material_interface_spacing = 0
 support_material_interface_spacing = 0

-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
+support_material_interface_speed = 30
+support_material_pattern = rectilinear-grid
+support_material_spacing = 2

 support_material_speed = 60
 support_material_speed = 60

-support_material_threshold = 45
-thin_walls = 1
+support_material_threshold = 0
+thin_walls = 0

 threads = 2
 threads = 2

-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 60
-top_solid_layers = 3
-travel_speed = 160
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 5
+top_solid_layers = 5
+travel_speed = 130

 xy_size_compensation = 0
 
 [print:MendelPro]
 xy_size_compensation = 0
 
 [print:MendelPro]

-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
+avoid_crossing_perimeters = 1
+bottom_solid_layers = 5

 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_acceleration = 0
 bridge_flow_ratio = 1

-bridge_speed = 35
-brim_width = 0
+bridge_speed = 40
+brim_width = 2

 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 20
+external_perimeter_speed = 30

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20


@@ -222,10 +312,10 @@ fill_angle = 45
 fill_density = 20%
 fill_pattern = rectilinear
 first_layer_acceleration = 0
 fill_density = 20%
 fill_pattern = rectilinear
 first_layer_acceleration = 0

-first_layer_extrusion_width = 150%
+first_layer_extrusion_width = 0

 first_layer_height = 0.2
 first_layer_height = 0.2

-first_layer_speed = 10
-gap_fill_speed = 10
+first_layer_speed = 30
+gap_fill_speed = 20

 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1


@@ -233,13 +323,13 @@ infill_extruder = 1
 infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0

-infill_overlap = 15%
-infill_speed = 0
+infill_overlap = 25%
+infill_speed = 50

 interface_shells = 0
 layer_height = 0.2
 interface_shells = 0
 layer_height = 0.2

-max_print_speed = 35
+max_print_speed = 80

 max_volumetric_speed = 0
 max_volumetric_speed = 0

-min_skirt_length = 1
+min_skirt_length = 6

 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0


@@ -248,42 +338,42 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0

-perimeter_speed = 0
-perimeters = 2
+perimeter_speed = 50
+perimeters = 3

 post_process = 
 raft_layers = 0
 resolution = 0
 post_process = 
 raft_layers = 0
 resolution = 0

-seam_position = aligned
-skirt_distance = 1
+seam_position = nearest
+skirt_distance = 6

 skirt_height = 1
 skirts = 1
 skirt_height = 1
 skirts = 1

-small_perimeter_speed = 10
+small_perimeter_speed = 20

 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0

-solid_infill_speed = 0
+solid_infill_speed = 40

 spiral_vase = 0
 standby_temperature_delta = -5
 spiral_vase = 0
 standby_temperature_delta = -5

-support_material = 0
+support_material = 1

 support_material_angle = 0
 support_material_angle = 0

-support_material_contact_distance = 0.2
+support_material_contact_distance = 0.4

 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1

-support_material_interface_layers = 2
+support_material_interface_layers = 3

 support_material_interface_spacing = 0
 support_material_interface_spacing = 0

-support_material_interface_speed = 100%
+support_material_interface_speed = 40

 support_material_pattern = rectilinear
 support_material_pattern = rectilinear

-support_material_spacing = 5
-support_material_speed = 0
-support_material_threshold = 40
+support_material_spacing = 3
+support_material_speed = 50
+support_material_threshold = 0

 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0

-top_solid_infill_speed = 20
-top_solid_layers = 3
+top_solid_infill_speed = 40
+top_solid_layers = 5

 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 


@@ -292,27 +382,27 @@ avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bottom_solid_layers = 3
 bridge_acceleration = 0
 bridge_flow_ratio = 1

-bridge_speed = 0
+bridge_speed = 40

 brim_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 brim_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 0
+external_perimeter_speed = 20

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45

-fill_density = 15%
-fill_pattern = rectilinear
+fill_density = 20%
+fill_pattern = 3dhoneycomb

 first_layer_acceleration = 0
 first_layer_acceleration = 0

-first_layer_extrusion_width = 150%
+first_layer_extrusion_width = 0

 first_layer_height = 0.2
 first_layer_height = 0.2

-first_layer_speed = 20
-gap_fill_speed = 0
+first_layer_speed = 10
+gap_fill_speed = 20

 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1


@@ -324,7 +414,7 @@ infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0
 layer_height = 0.2
 infill_speed = 0
 interface_shells = 0
 layer_height = 0.2

-max_print_speed = 50
+max_print_speed = 80

 max_volumetric_speed = 0
 min_skirt_length = 1
 notes = 
 max_volumetric_speed = 0
 min_skirt_length = 1
 notes = 


@@ -340,7 +430,7 @@ perimeters = 2
 post_process = 
 raft_layers = 0
 resolution = 0
 post_process = 
 raft_layers = 0
 resolution = 0

-seam_position = aligned
+seam_position = nearest

 skirt_distance = 1
 skirt_height = 1
 skirts = 1
 skirt_distance = 1
 skirt_height = 1
 skirts = 1


@@ -369,49 +459,49 @@ support_material_threshold = 40
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0

-top_solid_infill_speed = 0
-top_solid_layers = 3
+top_solid_infill_speed = 20
+top_solid_layers = 4

 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 

-[print:prusa i3 250]
+[print:Toy]

 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters = 0

-bottom_solid_layers = 3
+bottom_solid_layers = 2

 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_acceleration = 0
 bridge_flow_ratio = 1

-bridge_speed = 40
+bridge_speed = 0

 brim_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 brim_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 10
+external_perimeter_speed = 0

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45

-fill_density = 20%
+fill_density = 0%

 fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2

-first_layer_speed = 15
-gap_fill_speed = 10
+first_layer_speed = 10
+gap_fill_speed = 0

 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1

-infill_extrusion_width = 110%
+infill_extrusion_width = 0

 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
 infill_speed = 0
 interface_shells = 0

-layer_height = 0.25
-max_print_speed = 60
+layer_height = 0.2
+max_print_speed = 10

 max_volumetric_speed = 0
 min_skirt_length = 1
 notes = 
 max_volumetric_speed = 0
 min_skirt_length = 1
 notes = 


@@ -431,7 +521,7 @@ seam_position = aligned
 skirt_distance = 1
 skirt_height = 1
 skirts = 1
 skirt_distance = 1
 skirt_height = 1
 skirts = 1

-small_perimeter_speed = 10
+small_perimeter_speed = 0

 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1


@@ -439,14 +529,14 @@ solid_infill_extrusion_width = 0
 solid_infill_speed = 0
 spiral_vase = 0
 standby_temperature_delta = -5
 solid_infill_speed = 0
 spiral_vase = 0
 standby_temperature_delta = -5

-support_material = 0
+support_material = 1

 support_material_angle = 0
 support_material_angle = 0

-support_material_contact_distance = 0.2
+support_material_contact_distance = 0.3

 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1

-support_material_interface_layers = 2
+support_material_interface_layers = 3

 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear


@@ -456,14 +546,14 @@ support_material_threshold = 40
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0

-top_solid_infill_speed = 20
-top_solid_layers = 3
+top_solid_infill_speed = 0
+top_solid_layers = 0

 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 

-[print:prusa i3 400]
+[print:prusa i3]

 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters = 0

-bottom_solid_layers = 3
+bottom_solid_layers = 4

 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40


@@ -473,7 +563,7 @@ default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 10
+external_perimeter_speed = 30

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20


@@ -481,26 +571,26 @@ extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%

-fill_pattern = rectilinear
+fill_pattern = honeycomb

 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0

-first_layer_height = 0.2
-first_layer_speed = 15
-gap_fill_speed = 10
+first_layer_height = 0.3
+first_layer_speed = 10
+gap_fill_speed = 20

 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1

-infill_extrusion_width = 110%
+infill_extrusion_width = 0

 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%

-infill_speed = 0
+infill_speed = 80

 interface_shells = 0
 interface_shells = 0

-layer_height = 0.4
-max_print_speed = 80
+layer_height = 0.15
+max_print_speed = 100

 max_volumetric_speed = 0
 max_volumetric_speed = 0

-min_skirt_length = 1
+min_skirt_length = 3

 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0


@@ -509,58 +599,58 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0

-perimeter_speed = 0
-perimeters = 2
+perimeter_speed = 60
+perimeters = 3

 post_process = 
 raft_layers = 0
 resolution = 0
 post_process = 
 raft_layers = 0
 resolution = 0

-seam_position = aligned
-skirt_distance = 1
+seam_position = nearest
+skirt_distance = 6

 skirt_height = 1
 skirts = 1
 skirt_height = 1
 skirts = 1

-small_perimeter_speed = 10
+small_perimeter_speed = 15

 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0

-solid_infill_speed = 0
+solid_infill_speed = 40

 spiral_vase = 0
 standby_temperature_delta = -5
 spiral_vase = 0
 standby_temperature_delta = -5

-support_material = 0
+support_material = 1

 support_material_angle = 0
 support_material_angle = 0

-support_material_contact_distance = 0.2
+support_material_contact_distance = 0.3

 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1

-support_material_interface_layers = 2
+support_material_interface_layers = 3

 support_material_interface_spacing = 0
 support_material_interface_spacing = 0

-support_material_interface_speed = 100%
+support_material_interface_speed = 40

 support_material_pattern = rectilinear
 support_material_pattern = rectilinear

-support_material_spacing = 5
-support_material_speed = 0
-support_material_threshold = 40
+support_material_spacing = 3
+support_material_speed = 40
+support_material_threshold = 0

 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0

-top_solid_infill_speed = 20
-top_solid_layers = 3
+top_solid_infill_speed = 30
+top_solid_layers = 4

 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 

-[print:prusa i3 400 sup]
+[print:prusa i3 test]

 avoid_crossing_perimeters = 0
 avoid_crossing_perimeters = 0

-bottom_solid_layers = 3
+bottom_solid_layers = 4

 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40
 bridge_acceleration = 0
 bridge_flow_ratio = 1
 bridge_speed = 40

-brim_width = 0
+brim_width = 5

 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0
 complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 external_fill_pattern = rectilinear
 external_perimeter_extrusion_width = 0

-external_perimeter_speed = 10
+external_perimeter_speed = 30

 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20
 external_perimeters_first = 0
 extra_perimeters = 1
 extruder_clearance_height = 20


@@ -568,26 +658,26 @@ extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%
 extrusion_width = 0
 fill_angle = 45
 fill_density = 20%

-fill_pattern = rectilinear
+fill_pattern = honeycomb

 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_speed = 10
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.2
 first_layer_speed = 10

-gap_fill_speed = 10
+gap_fill_speed = 20

 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
 infill_extruder = 1

-infill_extrusion_width = 110%
+infill_extrusion_width = 0

 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 15%

-infill_speed = 0
+infill_speed = 80

 interface_shells = 0
 interface_shells = 0

-layer_height = 0.4
-max_print_speed = 80
+layer_height = 0.2
+max_print_speed = 100

 max_volumetric_speed = 0
 max_volumetric_speed = 0

-min_skirt_length = 1
+min_skirt_length = 3

 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 notes = 
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0


@@ -596,65 +686,65 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0

-perimeter_speed = 0
-perimeters = 2
+perimeter_speed = 60
+perimeters = 3

 post_process = 
 raft_layers = 0
 resolution = 0
 post_process = 
 raft_layers = 0
 resolution = 0

-seam_position = aligned
-skirt_distance = 1
+seam_position = nearest
+skirt_distance = 6

 skirt_height = 1
 skirts = 1
 skirt_height = 1
 skirts = 1

-small_perimeter_speed = 10
+small_perimeter_speed = 15

 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0

-solid_infill_speed = 0
+solid_infill_speed = 40

 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 1
 support_material_angle = 0
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 1
 support_material_angle = 0

-support_material_contact_distance = 0.2
+support_material_contact_distance = 0

 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0
 support_material_interface_extruder = 1

-support_material_interface_layers = 2
+support_material_interface_layers = 3

 support_material_interface_spacing = 0
 support_material_interface_spacing = 0

-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 5
-support_material_speed = 0
-support_material_threshold = 40
+support_material_interface_speed = 40
+support_material_pattern = pillars
+support_material_spacing = 3
+support_material_speed = 40
+support_material_threshold = 0

 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0
 thin_walls = 1
 threads = 2
 top_infill_extrusion_width = 0

-top_solid_infill_speed = 20
-top_solid_layers = 3
+top_solid_infill_speed = 30
+top_solid_layers = 4

 travel_speed = 100
 xy_size_compensation = 0
 
 travel_speed = 100
 xy_size_compensation = 0
 

-[printer:LULZBOT]
-bed_shape = 0x0,300x0,300x300,0x300
+[printer:Lulzbot]
+bed_shape = 0x0,298x0,298x275,0x275

 before_layer_gcode = 
 before_layer_gcode = 

-end_gcode = M400      ;   \nM104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200\nG28 X0  ; home X axis\nM84     ; disable motors
+end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors\n\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\n

 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 

-nozzle_diameter = 0.5
+nozzle_diameter = 0.35

 octoprint_apikey = 
 octoprint_host = 
 pressure_advance = 0
 retract_before_travel = 2
 retract_layer_change = 1
 octoprint_apikey = 
 octoprint_host = 
 pressure_advance = 0
 retract_before_travel = 2
 retract_layer_change = 1

-retract_length = 1.9
+retract_length = 3

 retract_length_toolchange = 3
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_length_toolchange = 3
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0

-retract_speed = 30
-start_gcode = G28 ; home all axes
+retract_speed = 40
+start_gcode = G28 ; home all axes\n

 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0


@@ -666,7 +756,7 @@ z_offset = 0
 [printer:MendelPro]
 bed_shape = 0x0,220x0,220x177,0x177
 before_layer_gcode = 
 [printer:MendelPro]
 bed_shape = 0x0,220x0,220x177,0x177
 before_layer_gcode = 

-end_gcode = M104 S0        ; turn off temperature\nM140 S0;\nG28 X0           ; home X axis\nM84               ; disable motors\n
+end_gcode = M104 S0        ; turn off temperature\nM140 S0;\nG28 X0           ; home X axis\nG0 Y177;\nM84               ; disable motors\n

 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 


@@ -682,7 +772,7 @@ retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40

-start_gcode = G28 Z            ; home Z\nG28 X Y         ; home X Y\n
+start_gcode = G28 Z            ; home Z\nG28 X Y         ; home X Y\nG0   Y40        ; clab move\n

 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0


@@ -719,10 +809,38 @@ vibration_limit = 0
 wipe = 0
 z_offset = 0
 
 wipe = 0
 z_offset = 0
 

+[printer:Toyrep]
+bed_shape = 0x0,125x0,125x125,0x125
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off nozzle temperature\nM84 ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 0
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 10
+start_gcode = \n
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+

 [printer:prusa i3]
 [printer:prusa i3]

-bed_shape = 0x0,190x0,190x190,0x190
+bed_shape = 0x0,190x0,190x220,0x220

 before_layer_gcode = 
 before_layer_gcode = 

-end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\n\n
+end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\nM81               ; Power off\n\n

 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 


@@ -731,15 +849,15 @@ octoprint_apikey = 176444E92BFF48819CE0D8F1B264A91C
 octoprint_host = 
 pressure_advance = 0
 retract_before_travel = 2
 octoprint_host = 
 pressure_advance = 0
 retract_before_travel = 2

-retract_layer_change = 1
-retract_length = 5
+retract_layer_change = 0
+retract_length = 2

 retract_length_toolchange = 10
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40
 retract_length_toolchange = 10
 retract_lift = 0
 retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 40

-start_gcode = G28 Z            ; home Z\n\nG28 X Y         ; home X Y\n
-toolchange_gcode = 
+start_gcode = G28 Z             ; home Z\n;G0 Z1            ; lift Z\nG28 X Y         ; home X Y\nG0   Y40        ; clab move
+toolchange_gcode = M83 ; turn on relative movement for extruder  \nG1 E-5  ; retract filament 5mm  \nG1 X10 Y10 Z4.000000  ; home X and Y axis leave Z at current height  \nM84 E ; release extruder stepper motor from 'holding' position  \n@pause ; pause print!  \nG1 E0 ; reset extruder, ready to push out plastic again  \nM82 ; set extruder movement back to absolute ready for next layer  

 use_firmware_retraction = 0
 use_relative_e_distances = 0
 use_volumetric_e = 0
 use_firmware_retraction = 0
 use_relative_e_distances = 0
 use_volumetric_e = 0