X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/blobdiff_plain/30da54621b04a1ef4bc2efa28d2af9420b4c48e0..67d785235e9a72d81123f4f2dc01553c7b96fa42:/3D-Drucker%2FSlicerBundle.ini.mw?ds=sidebyside

diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw
index 0b3dbc47c..086ef0e8f 100644
--- a/3D-Drucker%2FSlicerBundle.ini.mw
+++ b/3D-Drucker%2FSlicerBundle.ini.mw
@@ -1,6 +1,6 @@
 # generated by Slic3r 1.2.9 on Sun Aug 14 14:31:08 2016
 
-[filament:Lulzbot ABS]
+[filament:LulzBot ABS]
 bed_temperature = 100
 bridge_fan_speed = 50
 cooling = 1
@@ -18,7 +18,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 20
 temperature = 230
 
-[filament:Lulzbot PLA]
+[filament:LulzBot PLA]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
@@ -36,7 +36,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 30
 temperature = 200
 
-[filament:Lulzbot PLA Weiß]
+[filament:LulzBot PLA DAS FILAMENT]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
@@ -47,30 +47,12 @@ fan_below_layer_time = 60
 filament_colour = #FFFFFF
 filament_diameter = 2.85
 first_layer_bed_temperature = 50
-first_layer_temperature = 200
+first_layer_temperature = 220
 max_fan_speed = 100
 min_fan_speed = 30
 min_print_speed = 5
 slowdown_below_layer_time = 30
-temperature = 180
-
-[filament:Lulzbot PLA black]
-bed_temperature = 50
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #000000
-filament_diameter = 2.9
-first_layer_bed_temperature = 50
-first_layer_temperature = 200
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 5
-slowdown_below_layer_time = 30
-temperature = 200
+temperature = 215
 
 [filament:MendelPro ABS]
 bed_temperature = 0
@@ -108,7 +90,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 30
 temperature = 185
 
-[filament:MendelPro Mistery]
+[filament:MendelPro Mystery]
 bed_temperature = 80
 bridge_fan_speed = 50
 cooling = 1
@@ -198,7 +180,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 190
 
-[filament:prusa i3 ABS grün]
+[filament:Prusa i3 ABS grün]
 bed_temperature = 100
 bridge_fan_speed = 70
 cooling = 1
@@ -216,7 +198,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 245
 
-[filament:prusa i3 ABS grün blau]
+[filament:Prusa i3 ABS grün blau]
 bed_temperature = 100
 bridge_fan_speed = 70
 cooling = 1
@@ -234,7 +216,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 30
 temperature = 235
 
-[filament:prusa i3 ABS schwarz]
+[filament:Prusa i3 ABS schwarz]
 bed_temperature = 100
 bridge_fan_speed = 70
 cooling = 1
@@ -252,7 +234,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 255
 
-[filament:prusa i3 PLA]
+[filament:Prusa i3 PLA]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
@@ -270,7 +252,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 30
 temperature = 190
 
-[filament:prusa i3 PLA lila]
+[filament:Prusa i3 PLA lila]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
@@ -288,7 +270,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 200
 
-[filament:prusa i3 PLA pink]
+[filament:Prusa i3 PLA pink]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
@@ -306,12 +288,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 180
 
-[presets]
-filament = prusa i3 ABS grün blau.ini
-print = Lulzbot fine sup.ini
-printer = Lulzbot.ini
-
-[print:Lulzbot fine]
+[print:LulzBot fine]
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -350,7 +327,7 @@ interface_shells = 0
 layer_height = 0.2
 max_print_speed = 80
 max_volumetric_speed = 0
-min_skirt_length = 0
+min_skirt_length = 2
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -367,7 +344,7 @@ resolution = 0
 seam_position = aligned
 skirt_distance = 10
 skirt_height = 1
-skirts = 1
+skirts = 2
 small_perimeter_speed = 20
 solid_infill_below_area = 30
 solid_infill_every_layers = 0
@@ -398,7 +375,7 @@ top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:Lulzbot fine sup]
+[print:LulzBot fine support]
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -437,7 +414,7 @@ interface_shells = 0
 layer_height = 0.2
 max_print_speed = 80
 max_volumetric_speed = 0
-min_skirt_length = 0
+min_skirt_length = 2
 notes = 
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
@@ -454,7 +431,7 @@ resolution = 0
 seam_position = aligned
 skirt_distance = 10
 skirt_height = 1
-skirts = 1
+skirts = 2
 small_perimeter_speed = 20
 solid_infill_below_area = 30
 solid_infill_every_layers = 0
@@ -541,7 +518,7 @@ resolution = 0
 seam_position = aligned
 skirt_distance = 1
 skirt_height = 1
-skirts = 1
+skirts = 2
 small_perimeter_speed = 10
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
@@ -628,7 +605,7 @@ resolution = 0
 seam_position = aligned
 skirt_distance = 1
 skirt_height = 1
-skirts = 1
+skirts = 2
 small_perimeter_speed = 10
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
@@ -659,7 +636,7 @@ top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:MendelProSup]
+[print:MendelPro support]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -715,7 +692,7 @@ resolution = 0
 seam_position = aligned
 skirt_distance = 1
 skirt_height = 1
-skirts = 1
+skirts = 2
 small_perimeter_speed = 10
 solid_infill_below_area = 70
 solid_infill_every_layers = 0
@@ -833,7 +810,7 @@ top_solid_layers = 4
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:TinyBoy sup]
+[print:TinyBoy support]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -920,7 +897,7 @@ top_solid_layers = 4
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:Toy]
+[print:ToyRep]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -1007,7 +984,7 @@ top_solid_layers = 0
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:prusa i3 200]
+[print:Prusa i3 200]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -1094,7 +1071,7 @@ top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:prusa i3 200 sup]
+[print:Prusa i3 200 support]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -1181,7 +1158,7 @@ top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
 
-[printer:Lulzbot]
+[printer:LulzBot]
 bed_shape = 0x0,298x0,298x275,0x275
 before_layer_gcode = 
 end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors
@@ -1265,7 +1242,7 @@ vibration_limit = 0
 wipe = 0
 z_offset = 0
 
-[printer:Toyrep]
+[printer:ToyRep]
 bed_shape = 0x0,125x0,125x125,0x125
 before_layer_gcode = 
 end_gcode = M104 S0 ; turn off nozzle temperature\nM84 ; disable motors
@@ -1293,7 +1270,7 @@ vibration_limit = 0
 wipe = 0
 z_offset = 0
 
-[printer:prusa i3]
+[printer:Prusa i3]
 bed_shape = 0x0,190x0,190x190,0x190
 before_layer_gcode = 
 end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\nM81               ; Power off\n\n