X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/blobdiff_plain/351a800009087da7abd37aa512889867465ac219..ce6a62eef33ef47132ac515b335bbb78a591195f:/RepRap%2FConfigs%2FSlic3r.mw

diff --git a/RepRap%2FConfigs%2FSlic3r.mw b/RepRap%2FConfigs%2FSlic3r.mw
index a69e5b863..76933a304 100644
--- a/RepRap%2FConfigs%2FSlic3r.mw
+++ b/RepRap%2FConfigs%2FSlic3r.mw
@@ -1,96 +1,19 @@
-Eine Seite um (gute) Beispielkonfigkurationen zu sammeln, am besten mit Beispieldruck(foto)
+Die Slic3r-Konfigurationen sind nach den einzelnen Tabs aufgetrennt. Zum Importieren auf den entsprechenden Tab wechseln, Datei über „File“ → „Load Config“ importieren, dann auf den kleinen Speichern-Button (Disketten-Icon) neben der Auswahlbox klicken.
 
-== Gelbes Filament ==
-* Damit gedruckt: der letzte gelbe frame-vertex für den Drucker
-* etwas wärmer (195°C)
-* 0.22 mm z-offeset
-<pre style="height:200px;overflow:scroll;">
-acceleration = 0
-bed_size = 170,170
-bed_temperature = 60
-bridge_fan_speed = 100
-bridge_flow_ratio = 1
-bridge_speed = 30
-brim_width = 0
-complete_objects = 0
-cooling = 1
-disable_fan_first_layers = 1
-duplicate = 1
-duplicate_distance = 6
-duplicate_grid = 1,1
-end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
-external_perimeter_speed = 90%
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_axis = E
-extrusion_multiplier = 1
-extrusion_width = 0
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_diameter = 3
-fill_angle = 45
-fill_density = 0.15
-fill_pattern = rectilinear
-first_layer_bed_temperature = 60
-first_layer_extrusion_width = 0
-first_layer_height = 115%
-first_layer_speed = 80%
-first_layer_temperature = 200
-g0 = 0
-gcode_arcs = 0
-gcode_comments = 0
-gcode_flavor = reprap
-infill_acceleration = 50
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_speed = 40
-layer_gcode = 
-layer_height = 0.28
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-notes = Used for Mate name tag
-nozzle_diameter = 0.35
-output_filename_format = [input_filename_base].gcode
-perimeter_acceleration = 25
-perimeter_speed = 30
-perimeters = 3
-perimeters_extruder = 1
-perimeters_extrusion_width = 0
-post_process = 
-print_center = 50,27
-randomize_start = 1
-retract_before_travel = 4
-retract_length = 3
-retract_lift = 0.4
-retract_restart_extra = 0
-retract_speed = 30
-rotate = 0
-scale = 1
-skirt_distance = 6
-skirt_height = 1
-skirts = 3
-slowdown_below_layer_time = 60
-small_perimeter_speed = 30
-solid_fill_pattern = rectilinear
-solid_infill_speed = 40
-solid_layers = 3
-start_gcode = G28 ; home all axes\nM92 E820
-support_material = 
-support_material_angle = 45
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_threshold = 45
-temperature = 195
-threads = 2
-top_solid_infill_speed = 40
-travel_speed = 130
-use_relative_e_distances = 0
-z_offset = 0.22
-</pre>
+Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'', die für alle Teile gut funktioniert. Die hier gelisteten Konfigurationen basieren auf den sehr konservativ ausgelegten, [https://github.com/reprappro/profiles/archive/v1.0.tar.gz originalen Versionen von RepRapPro], mit denen zumindest jeder Druck (wenn auch nur langsam) gelingen sollte.
+
+== Print Settings ==
+Bei Infill und Anzahl Perimetern kann je nach benötigter Stabilität experimentiert werden.
+{{rawinclude|RepRap/Configs/Slic3r/print-pla-0.3mm.ini|print-pla-0.3mm.ini|fold=y}}
+{{rawinclude|RepRap/Configs/Slic3r/print-abs-0.3mm.ini|print-abs-0.3mm.ini|fold=y}}
+
+== Filament Settings ==
+Temperaturen müssen unter Umständen an das verwendete Filament angepasst werden. Ask your local dealer.
+
+{{rawinclude|RepRap/Configs/Slic3r/filament-pla-1.75mm.ini|filament-pla-1.75mm.ini|fold=y}}
+{{rawinclude|RepRap/Configs/Slic3r/filament-abs-1.75mm.ini|filament-abs-1.75mm.ini|fold=y}}
+
+== Printer Settings ==
+{{rawinclude|RepRap/Configs/Slic3r/printer.ini|printer.ini|fold=y}}
 
 [[Kategorie:RepRap]]