X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/blobdiff_plain/42cc0fee8d6f7e9ccdf5bb06eaec0b31d1296ecc..8f40712d775e4067b1e6d272b28e1e444d967d86:/RepRap.mw
diff --git a/RepRap.mw b/RepRap.mw
index 67bb93703..1feaa3c11 100644
--- a/RepRap.mw
+++ b/RepRap.mw
@@ -20,8 +20,16 @@ Er war nicht gerade billig, deshalb müssen einige Regeln befolgt werden.
* [[Benutzer:DieLenaMaria|Lena]]
* [[Benutzer:Marylin|Marylin]]
* [[Benutzer:Larsan|Larsan]]
+* [[Benutzer:Stew|Stew]]
+* [[Benutzer:Chrissi^|Chrissi^]]
+* Hanhaiwen
-Druckführerscheinabsolvierungsundeinweisungsvorgang in Arbeit.
+=== Interessierte Entitäten ===
+* {{Benutzer|Joke}}
+* Lulu-Ann
+* --[[Benutzer:Matthis|Matthis]] 16:10, 14. Nov. 2012 (CET)
+
+Druckführerscheinabsolvierungsundeinweisungsvorgang ist in Arbeit. (â¢)
==Logbuch==
Im [[Reprap/Logbuch|Logbuch]] ist eine Liste der bisher gedruckten Teile.
@@ -31,7 +39,7 @@ Im [[Reprap/Logbuch|Logbuch]] ist eine Liste der bisher gedruckten Teile.
* git://github.com/alexrj/Slic3r.git
* git://github.com/kliment/Printrun.git
-Anmerkung: openscad kompiliert derzeit wegen eines Bugs in der cgal-Bibliothek nicht. Entweder alte Version nutzen, oder diesen Patch auf die cgal-library anwenden und danach openscad kompilieren: http://sources.gentoo.org/cgi-bin/viewvc.cgi/gentoo-x86/sci-mathematics/cgal/files/cgal-4.0-gcc47.patch?view=markup
+* Skeinforge (Alternative zu Slic3r): http://fabmetheus.crsndoo.com/index.php
==[[Reprap/Modelle|Modelle]]==
* Stratum0 Mate name tags - http://www.thingiverse.com/thing:23817
@@ -53,46 +61,48 @@ Anmerkung: openscad kompiliert derzeit wegen eines Bugs in der cgal-Bibliothek n
* Der erste Layer sollte mit 10°C mehr gedruckt werden
* Es kann helfen, von Zeit zu Zeit die Version zu updaten
+[[Benutzer:Stew|Stew]] hat eine funktionierende Konfiguration unter [[Reprap/Skeinforge]] eine Kurzanleitung und Konfiguration für Skeinforge abgelegt.
+
===[[Reprap/Configs|Konfigurationen für den Slicer]]===
Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, mit den hier gelisteten sollte aber ein Druck einigermaÃen gelingen.
==== Von larsan ====
Mit Support etc. aktiviert. In etwa die Config vom Twilight-Druck
-# generated by Slic3r 0.9.4-dev on Sat Oct 27 23:12:28 2012
+# generated by Slic3r 0.9.4-dev on Sat Nov 3 17:46:55 2012
acceleration = 0
bed_size = 180,200
bed_temperature = 60
-bottom_solid_layers = 1
+bottom_solid_layers = 3
bridge_fan_speed = 100
-bridge_flow_ratio = 1
+bridge_flow_ratio = 1.05
bridge_speed = 60
brim_width = 0
-complete_objects = 0
+complete_objects =
cooling = 1
disable_fan_first_layers = 1
duplicate = 1
duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
-external_perimeter_speed = 60
+external_perimeter_speed = 100%
extra_perimeters = 1
extruder_clearance_height = 20
-extruder_clearance_radius = 20
+extruder_clearance_radius = 30
extruder_offset = 0x0
extrusion_axis = E
-extrusion_multiplier = 1.0
-extrusion_width = 90%
+extrusion_multiplier = 1.02
+extrusion_width = 100%
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
fill_angle = 45
-fill_density = 1
-fill_pattern = rectilinear
+fill_density = 0.25
+fill_pattern = honeycomb
first_layer_bed_temperature = 60
-first_layer_extrusion_width = 40%
-first_layer_height = 116%
-first_layer_speed = 50%
+first_layer_extrusion_width = 90%
+first_layer_height = 95%
+first_layer_speed = 25%
first_layer_temperature = 200
g0 = 0
gcode_arcs = 0
@@ -101,21 +111,22 @@ gcode_flavor = reprap
infill_acceleration = 50
infill_every_layers = 1
infill_extruder = 1
-infill_extrusion_width = 60%
-infill_speed = 60
+infill_extrusion_width = 120%
+infill_speed = 70
layer_gcode =
-layer_height = 0.28
+layer_height = 0.3
max_fan_speed = 100
min_fan_speed = 35
-min_print_speed = 10
-notes = Used for Mate name tag
+min_print_speed = 5
+min_skirt_length = 0
+notes = larsanconfig
nozzle_diameter = 0.35
only_retract_when_crossing_perimeters = 1
-output_filename_format = [input_filename_base].gcode
+output_filename_format = [timestamp]_[input_filename_base].gcode
perimeter_acceleration = 25
perimeter_extruder = 1
-perimeter_extrusion_width = 110%
-perimeter_speed = 60
+perimeter_extrusion_width = 0
+perimeter_speed = 40
perimeters = 2
post_process =
print_center = 90,100
@@ -132,27 +143,28 @@ scale = 1
skirt_distance = 10
skirt_height = 1
skirts = 3
-slowdown_below_layer_time = 60
-small_perimeter_speed = 60
+slowdown_below_layer_time = 50
+small_perimeter_speed = 100%
solid_fill_pattern = rectilinear
solid_infill_below_area = 0
-solid_infill_every_layers = 1
-solid_infill_speed = 60
+solid_infill_every_layers = 0
+solid_infill_speed = 100%
start_gcode = G28 ; home all axes\nM92 E820
-support_material =
+support_material = 1
support_material_angle = 45
support_material_extruder = 1
-support_material_extrusion_width = 0
+support_material_extrusion_width = 160%
support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_threshold = 45
+support_material_spacing = 2
+support_material_threshold = 40
temperature = 200
threads = 2
-top_solid_infill_speed = 60
-top_solid_layers = 1
+top_solid_infill_speed = 40%
+top_solid_layers = 2
travel_speed = 90
use_relative_e_distances = 0
z_offset = 0.20
+
==== Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ====
@@ -251,3 +263,105 @@ travel_speed = 140
use_relative_e_distances = 0
z_offset = 0.22
+
+=== von Chrissi^ ===
+* Nette Konfiguration zum Drucken von allem möglichen.
+* First Layer ist super langsam => Guter Druck auch bei kleinen Strukturen
+* First Layer Extrusion Width 110% => Wenig ''Wellenschlagen'' auf dem ersten Layer
+
+# generated by Slic3r 0.9.3 on Tue Nov 6 21:53:43 2012
+acceleration = 0
+bed_size = 180,200
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_flow_ratio = 1.05
+bridge_speed = 60
+brim_width = 0
+complete_objects =
+cooling = 1
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
+external_perimeter_speed = 100%
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 30
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 100%
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 0.1
+fill_pattern = rectilinear
+first_layer_bed_temperature = 60
+first_layer_extrusion_width = 112%
+first_layer_height = 95%
+first_layer_speed = 15%
+first_layer_temperature = 200
+g0 = 0
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 120%
+infill_speed = 60
+layer_gcode =
+layer_height = 0.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 5
+notes = larsanconfig
+nozzle_diameter = 0.35
+only_retract_when_crossing_perimeters = 1
+output_filename_format = [timestamp]_[input_filename_base].gcode
+perimeter_acceleration = 25
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 60
+perimeters = 2
+post_process =
+print_center = 120,120
+randomize_start = 1
+retract_before_travel = 4
+retract_length = 2
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+rotate = 0
+scale = 1
+skirt_distance = 10
+skirt_height = 1
+skirts = 3
+slowdown_below_layer_time = 50
+small_perimeter_speed = 50%
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_speed = 100%
+solid_layers = 3
+start_gcode = G28 ; home all axes\nM92 E820
+support_material = 1
+support_material_angle = 45
+support_material_extruder = 1
+support_material_extrusion_width = 160%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_threshold = 40
+temperature = 205
+threads = 2
+top_solid_infill_speed = 40%
+travel_speed = 90
+use_relative_e_distances = 0
+z_offset = 0
+
+
+ [[Kategorie:Infrastruktur]] ·