X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/blobdiff_plain/510e8a9342f2dce258ab2b0a5a7bd6d68e2c2b43..b25f3e69a48d152f4afb07c87b5153273161d452:/RepRap.mw
diff --git a/RepRap.mw b/RepRap.mw
index 44d3e9a22..82411284b 100644
--- a/RepRap.mw
+++ b/RepRap.mw
@@ -1 +1,362 @@
-#WEITERLEITUNG [[Reprap/Parent]]
+Alles zum alten Drucker unter [[Reprap/Parent]]
+
+==Hinweise zur Benutzung==
+Er war nicht gerade billig, deshalb müssen einige Regeln befolgt werden.
+
+* Nur die Druckberechtigten dürfen drucken
+* Wenn der Drucker längere Zeit nicht druckt, stell sicher, dass die Heizung für den Extruder aus ist
+* Das Filament muss ggf. per Hand nachgeführt werden
+* Die Plattform vor dem Drucken gründlich säubern. Das ist eine häufige Ursache für Probleme
+* Nach dem Drucken warten, bis die Teile abgekühlt sind, da sie sich ansonsten verformen
+* Manche Teile benötigen Kühlung, hierfür z.B. den Tischventilator verwenden (siehe gedruckte Eule)
+* Den Druck zwischendrin zu unterbrechen um später weiter zu drucken - und sei es nur für 5 Sekunden - ist mit unendlich viel Problemen behaftet und sollte wenn irgendwie möglich vermieden werden.
+
+==Druckberechtigte==
+* [[Benutzer:DanielWillmann|Daniel Willmann]]
+* [[Benutzer:Shoragan|Shoragan]]
+* [[Benutzer:Daniel Bohrer|Daniel Bohrer]]
+* [[Benutzer:Oni|Oni]]
+* [[Benutzer:DooMMasteR|DooMMasteR]]
+* [[Benutzer:DieLenaMaria|Lena]]
+* [[Benutzer:Marylin|Marylin]]
+* [[Benutzer:Larsan|Larsan]]
+* [[Benutzer:Stew|Stew]]
+* [[Benutzer:Chrissi^|Chrissi^]]
+* Hanhaiwen
+
+Druckführerscheinabsolvierungsundeinweisungsvorgang in Arbeit.
+
+==Logbuch==
+Im [[Reprap/Logbuch|Logbuch]] ist eine Liste der bisher gedruckten Teile.
+
+==Software==
+* git://github.com/openscad/openscad.git
+* git://github.com/alexrj/Slic3r.git
+* git://github.com/kliment/Printrun.git
+
+* Skeinforge (Alternative zu Slic3r): http://fabmetheus.crsndoo.com/index.php
+
+==[[Reprap/Modelle|Modelle]]==
+* Stratum0 Mate name tags - http://www.thingiverse.com/thing:23817
+** in der Slic3r-Konfiguration am besten "rectilinear" als Fill Pattern auswählen ("honeycomb" ergibt unschöne eingesunkene Kanten, dort wo die Buchstaben oben zu Ende sind) --[[Benutzer:Daniel Bohrer|Daniel Bohrer]] 23:37, 3. Jun. 2012 (CEST)
+* INGA Gehäuse - http://www.thingiverse.com/thing:22450
+*
+
+==Workflow==
+===3D Modell erstellen===
+* z.B. mit OpenSCAD, FreeCAD oder Blender
+* Jedes Program, das einen STL export hat
+* Manchmal enthalten die STLs Fehler und Slic3r kommt durcheinander. Netfabb http://cloud.netfabb.com/ kann viele dieser Dateien wieder reparieren
+* http://thingiverse.com ist eine Super Quelle bereits fertiger Modelle
+
+===Slicen===
+* Die Bemerkungen hier beziehen sich auf Slic3r. Es gibt noch andere Tools, wie SFACT oder Skeinforge, aber die sind deutlich komplexer
+* Die Config muss nach jedem Start neu geladen werden
+* Eine gute Temperatur für das weiÃe PLA ist 185°
+* Der erste Layer sollte mit 10°C mehr gedruckt werden
+* Es kann helfen, von Zeit zu Zeit die Version zu updaten
+
+[[Benutzer:Stew|Stew]] hat eine funktionierende Konfiguration unter [[Reprap/Skeinforge]] eine Kurzanleitung und Konfiguration für Skeinforge abgelegt.
+
+===[[Reprap/Configs|Konfigurationen für den Slicer]]===
+Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, mit den hier gelisteten sollte aber ein Druck einigermaÃen gelingen.
+==== Von larsan ====
+Mit Support etc. aktiviert. In etwa die Config vom Twilight-Druck
+
+
+# generated by Slic3r 0.9.4-dev on Sat Nov 3 17:46:55 2012
+acceleration = 0
+bed_size = 180,200
+bed_temperature = 60
+bottom_solid_layers = 3
+bridge_fan_speed = 100
+bridge_flow_ratio = 1.05
+bridge_speed = 60
+brim_width = 0
+complete_objects =
+cooling = 1
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
+external_perimeter_speed = 100%
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 30
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1.02
+extrusion_width = 100%
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 0.25
+fill_pattern = honeycomb
+first_layer_bed_temperature = 60
+first_layer_extrusion_width = 90%
+first_layer_height = 95%
+first_layer_speed = 25%
+first_layer_temperature = 200
+g0 = 0
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 120%
+infill_speed = 70
+layer_gcode =
+layer_height = 0.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 5
+min_skirt_length = 0
+notes = larsanconfig
+nozzle_diameter = 0.35
+only_retract_when_crossing_perimeters = 1
+output_filename_format = [timestamp]_[input_filename_base].gcode
+perimeter_acceleration = 25
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 2
+post_process =
+print_center = 90,100
+randomize_start = 1
+retract_before_travel = 4
+retract_length = 2
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+rotate = 0
+scale = 1
+skirt_distance = 10
+skirt_height = 1
+skirts = 3
+slowdown_below_layer_time = 50
+small_perimeter_speed = 100%
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_speed = 100%
+start_gcode = G28 ; home all axes\nM92 E820
+support_material = 1
+support_material_angle = 45
+support_material_extruder = 1
+support_material_extrusion_width = 160%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_threshold = 40
+temperature = 200
+threads = 2
+top_solid_infill_speed = 40%
+top_solid_layers = 2
+travel_speed = 90
+use_relative_e_distances = 0
+z_offset = 0.20
+
+
+
+==== Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ====
+
+# generated by Slic3r 0.9.4-dev on Tue Oct 23 23:01:34 2012
+acceleration = 0
+bed_size = 180,200
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 350
+brim_width = 0
+complete_objects = 0
+cooling = 1
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
+external_perimeter_speed = 90%
+extra_perimeters =
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1.0
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 0.3
+fill_pattern = rectilinear
+first_layer_bed_temperature = 60
+first_layer_extrusion_width = 0
+first_layer_height = 120%
+first_layer_speed = 20%
+first_layer_temperature = 195
+g0 = 0
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_speed = 120
+layer_gcode =
+layer_height = 0.28
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+notes = Used for Mate name tag
+nozzle_diameter = 0.35
+only_retract_when_crossing_perimeters = 0
+output_filename_format = [input_filename_base].gcode
+perimeter_acceleration = 25
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 100
+perimeters = 2
+post_process =
+print_center = 90,100
+randomize_start = 1
+retract_before_travel = 4
+retract_length = 4
+retract_length_toolchange = 3
+retract_lift = 0.5
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 150
+rotate = 0
+scale = 1
+skirt_distance = 10
+skirt_height = 1
+skirts = 2
+slowdown_below_layer_time = 60
+small_perimeter_speed = 80%
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_speed = 100%
+solid_layers = 3
+start_gcode = G28 ; home all axes\nM92 E820
+support_material =
+support_material_angle = 45
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_threshold = 45
+temperature = 185
+threads = 3
+top_solid_infill_speed = 60
+travel_speed = 140
+use_relative_e_distances = 0
+z_offset = 0.22
+
+
+=== von Chrissi^ ===
+* Nette Konfiguration zum Drucken von allem möglichen.
+* First Layer ist super langsam => Guter Druck auch bei kleinen Strukturen
+* First Layer Extrusion Width 110% => Wenig ''Wellenschlagen'' auf dem ersten Layer
+
+# generated by Slic3r 0.9.3 on Tue Nov 6 21:53:43 2012
+acceleration = 0
+bed_size = 180,200
+bed_temperature = 60
+bridge_fan_speed = 100
+bridge_flow_ratio = 1.05
+bridge_speed = 60
+brim_width = 0
+complete_objects =
+cooling = 1
+disable_fan_first_layers = 1
+duplicate = 1
+duplicate_distance = 6
+duplicate_grid = 1,1
+end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
+external_perimeter_speed = 100%
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 30
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 100%
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 1.75
+fill_angle = 45
+fill_density = 0.1
+fill_pattern = rectilinear
+first_layer_bed_temperature = 60
+first_layer_extrusion_width = 112%
+first_layer_height = 95%
+first_layer_speed = 15%
+first_layer_temperature = 200
+g0 = 0
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 120%
+infill_speed = 60
+layer_gcode =
+layer_height = 0.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 5
+notes = larsanconfig
+nozzle_diameter = 0.35
+only_retract_when_crossing_perimeters = 1
+output_filename_format = [timestamp]_[input_filename_base].gcode
+perimeter_acceleration = 25
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 60
+perimeters = 2
+post_process =
+print_center = 120,120
+randomize_start = 1
+retract_before_travel = 4
+retract_length = 2
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+rotate = 0
+scale = 1
+skirt_distance = 10
+skirt_height = 1
+skirts = 3
+slowdown_below_layer_time = 50
+small_perimeter_speed = 50%
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_speed = 100%
+solid_layers = 3
+start_gcode = G28 ; home all axes\nM92 E820
+support_material = 1
+support_material_angle = 45
+support_material_extruder = 1
+support_material_extrusion_width = 160%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_threshold = 40
+temperature = 205
+threads = 2
+top_solid_infill_speed = 40%
+travel_speed = 90
+use_relative_e_distances = 0
+z_offset = 0
+
+
+ [[Kategorie:Infrastruktur]] ·