X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/blobdiff_plain/8dc848594848a185d3bff7aa4956189a00be66f0..8236430a3d63a5973fd4bb1d1f29ba41fd2801eb:/3D-Drucker%2FSlicerBundle.ini.mw?ds=inline diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw index 1bb1a22ba..03ba5a2e0 100644 --- a/3D-Drucker%2FSlicerBundle.ini.mw +++ b/3D-Drucker%2FSlicerBundle.ini.mw @@ -1,4 +1,40 @@ -# generated by Slic3r 1.2.9 on Thu May 19 15:50:57 2016 +# generated by Slic3r 1.2.9 on Thu Jun 2 16:16:44 2016 + +[filament:Lulzbot ABS] +bed_temperature = 100 +bridge_fan_speed = 100 +cooling = 0 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_colour = #FFFFFF +filament_diameter = 2.85 +first_layer_bed_temperature = 100 +first_layer_temperature = 250 +max_fan_speed = 100 +min_fan_speed = 30 +min_print_speed = 10 +slowdown_below_layer_time = 20 +temperature = 245 + +[filament:Lulzbot PLA] +bed_temperature = 50 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FFFFFF +filament_diameter = 2.85 +first_layer_bed_temperature = 55 +first_layer_temperature = 200 +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +slowdown_below_layer_time = 30 +temperature = 190 [filament:Lulzbot PLA Weiß] bed_temperature = 50 @@ -64,10 +100,10 @@ fan_always_on = 1 fan_below_layer_time = 60 filament_colour = #FFFFFF filament_diameter = 1.7 -first_layer_bed_temperature = 50 +first_layer_bed_temperature = 55 first_layer_temperature = 200 max_fan_speed = 100 -min_fan_speed = 50 +min_fan_speed = 40 min_print_speed = 5 slowdown_below_layer_time = 30 temperature = 180 @@ -88,7 +124,25 @@ max_fan_speed = 100 min_fan_speed = 50 min_print_speed = 5 slowdown_below_layer_time = 30 -temperature = 100 +temperature = 200 + +[filament:MendelPro PLA transparent] +bed_temperature = 50 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FFFFFF +filament_diameter = 1.7 +first_layer_bed_temperature = 55 +first_layer_temperature = 200 +max_fan_speed = 100 +min_fan_speed = 40 +min_print_speed = 5 +slowdown_below_layer_time = 30 +temperature = 200 [filament:TinyBoy PLA] bed_temperature = 0 @@ -108,41 +162,41 @@ min_print_speed = 5 slowdown_below_layer_time = 15 temperature = 185 -[filament:prusa i3 PLA black fine] -bed_temperature = 50 +[filament:Toy] +bed_temperature = 0 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 1 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 60 -filament_colour = #FF0000 -filament_diameter = 2.9 -first_layer_bed_temperature = 50 +filament_colour = #FFFFFF +filament_diameter = 1.7 +first_layer_bed_temperature = 0 first_layer_temperature = 200 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 5 -slowdown_below_layer_time = 15 -temperature = 200 +slowdown_below_layer_time = 30 +temperature = 180 -[filament:prusa i3 PLA igus] +[filament:prusa i3 PLA black fine] bed_temperature = 50 bridge_fan_speed = 100 -cooling = 0 +cooling = 1 disable_fan_first_layers = 1 -extrusion_multiplier = 0.9 -fan_always_on = 0 +extrusion_multiplier = 1 +fan_always_on = 1 fan_below_layer_time = 60 -filament_colour = #D0C9B0 +filament_colour = #FF0000 filament_diameter = 2.9 first_layer_bed_temperature = 50 -first_layer_temperature = 250 +first_layer_temperature = 200 max_fan_speed = 100 -min_fan_speed = 35 +min_fan_speed = 100 min_print_speed = 5 slowdown_below_layer_time = 15 -temperature = 250 +temperature = 200 [filament:prusa i3 PLA lila] bed_temperature = 50 @@ -164,10 +218,10 @@ temperature = 200 [presets] filament = MendelPro PLA fast.ini -print = MendelPro.ini -printer = MendelPro.ini +print = Lulzbot fine.ini +printer = Lulzbot.ini -[print:Lulzbot] +[print:Lulzbot fine] avoid_crossing_perimeters = 1 bottom_solid_layers = 4 bridge_acceleration = 0 @@ -197,14 +251,14 @@ gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 2 infill_extruder = 1 -infill_extrusion_width = 0 +infill_extrusion_width = 110% infill_first = 0 infill_only_where_needed = 0 infill_overlap = 15% infill_speed = 0 interface_shells = 0 layer_height = 0.25 -max_print_speed = 80 +max_print_speed = 100 max_volumetric_speed = 0 min_skirt_length = 0 notes = @@ -224,7 +278,7 @@ seam_position = aligned skirt_distance = 6 skirt_height = 1 skirts = 2 -small_perimeter_speed = 30 +small_perimeter_speed = 20 solid_infill_below_area = 30 solid_infill_every_layers = 0 solid_infill_extruder = 1 @@ -249,7 +303,7 @@ support_material_threshold = 45 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 -top_solid_infill_speed = 0 +top_solid_infill_speed = 30 top_solid_layers = 4 travel_speed = 100 xy_size_compensation = 0 @@ -515,6 +569,93 @@ top_solid_layers = 3 travel_speed = 100 xy_size_compensation = 0 +[print:Toy] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 2 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 0 +brim_width = 0 +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 0 +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 0% +fill_pattern = rectilinear +first_layer_acceleration = 0 +first_layer_extrusion_width = 0 +first_layer_height = 0.2 +first_layer_speed = 10 +gap_fill_speed = 0 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 15% +infill_speed = 0 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 10 +max_volumetric_speed = 0 +min_skirt_length = 1 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 0 +perimeters = 2 +post_process = +raft_layers = 0 +resolution = 0 +seam_position = aligned +skirt_distance = 1 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 0 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 0 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 5 +support_material_speed = 0 +support_material_threshold = 40 +thin_walls = 1 +threads = 2 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 0 +top_solid_layers = 0 +travel_speed = 100 +xy_size_compensation = 0 + [print:prusa i3 100] avoid_crossing_perimeters = 0 bottom_solid_layers = 3 @@ -846,7 +987,7 @@ support_material_angle = 0 support_material_contact_distance = 0.3 support_material_enforce_layers = 0 support_material_extruder = 1 -support_material_extrusion_width = 0 +support_material_extrusion_width = 90% support_material_interface_extruder = 1 support_material_interface_layers = 2 support_material_interface_spacing = 2 @@ -947,6 +1088,34 @@ vibration_limit = 0 wipe = 0 z_offset = 0 +[printer:Toyrep] +bed_shape = 0x0,125x0,125x125,0x125 +before_layer_gcode = +end_gcode = M104 S0 ; turn off nozzle temperature\nM84 ; disable motors +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = +nozzle_diameter = 0.4 +octoprint_apikey = +octoprint_host = +pressure_advance = 0 +retract_before_travel = 2 +retract_layer_change = 1 +retract_length = 0 +retract_length_toolchange = 3 +retract_lift = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 10 +start_gcode = \n +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +vibration_limit = 0 +wipe = 0 +z_offset = 0 + [printer:prusa i3] bed_shape = 0x0,190x0,190x190,0x190 before_layer_gcode =