X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/blobdiff_plain/916090ac88c00d2c7fa64a3f973ac3d9872f46f3..8236430a3d63a5973fd4bb1d1f29ba41fd2801eb:/3D-Drucker%2FSlicerBundle.ini.mw diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw index 8d2478952..03ba5a2e0 100644 --- a/3D-Drucker%2FSlicerBundle.ini.mw +++ b/3D-Drucker%2FSlicerBundle.ini.mw @@ -1,22 +1,58 @@ -# generated by Slic3r 1.2.9 on Fri May 13 17:04:53 2016 +# generated by Slic3r 1.2.9 on Thu Jun 2 16:16:44 2016 -[filament:LULZBOT ABS fine] +[filament:Lulzbot ABS] bed_temperature = 100 -bridge_fan_speed = 0 -cooling = 1 +bridge_fan_speed = 100 +cooling = 0 disable_fan_first_layers = 1 extrusion_multiplier = 1 fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #FFFFFF -filament_diameter = 2.89 +filament_diameter = 2.85 first_layer_bed_temperature = 100 first_layer_temperature = 250 -max_fan_speed = 0 -min_fan_speed = 0 -min_print_speed = 15 +max_fan_speed = 100 +min_fan_speed = 30 +min_print_speed = 10 slowdown_below_layer_time = 20 -temperature = 240 +temperature = 245 + +[filament:Lulzbot PLA] +bed_temperature = 50 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FFFFFF +filament_diameter = 2.85 +first_layer_bed_temperature = 55 +first_layer_temperature = 200 +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +slowdown_below_layer_time = 30 +temperature = 190 + +[filament:Lulzbot PLA Weiß] +bed_temperature = 50 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_colour = #FFFFFF +filament_diameter = 2.85 +first_layer_bed_temperature = 55 +first_layer_temperature = 200 +max_fan_speed = 100 +min_fan_speed = 30 +min_print_speed = 10 +slowdown_below_layer_time = 20 +temperature = 190 [filament:MendelPro ABS] bed_temperature = 0 @@ -67,11 +103,47 @@ filament_diameter = 1.7 first_layer_bed_temperature = 55 first_layer_temperature = 200 max_fan_speed = 100 -min_fan_speed = 50 +min_fan_speed = 40 min_print_speed = 5 slowdown_below_layer_time = 30 temperature = 180 +[filament:MendelPro PLA fast] +bed_temperature = 50 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FFFFFF +filament_diameter = 1.7 +first_layer_bed_temperature = 50 +first_layer_temperature = 200 +max_fan_speed = 100 +min_fan_speed = 50 +min_print_speed = 5 +slowdown_below_layer_time = 30 +temperature = 200 + +[filament:MendelPro PLA transparent] +bed_temperature = 50 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 1 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FFFFFF +filament_diameter = 1.7 +first_layer_bed_temperature = 55 +first_layer_temperature = 200 +max_fan_speed = 100 +min_fan_speed = 40 +min_print_speed = 5 +slowdown_below_layer_time = 30 +temperature = 200 + [filament:TinyBoy PLA] bed_temperature = 0 bridge_fan_speed = 100 @@ -90,43 +162,43 @@ min_print_speed = 5 slowdown_below_layer_time = 15 temperature = 185 -[filament:prusa i3 PLA black fine] -bed_temperature = 50 +[filament:Toy] +bed_temperature = 0 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 1 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 60 -filament_colour = #FF0000 -filament_diameter = 2.9 -first_layer_bed_temperature = 50 +filament_colour = #FFFFFF +filament_diameter = 1.7 +first_layer_bed_temperature = 0 first_layer_temperature = 200 max_fan_speed = 100 min_fan_speed = 100 min_print_speed = 5 -slowdown_below_layer_time = 15 -temperature = 200 +slowdown_below_layer_time = 30 +temperature = 180 -[filament:prusa i3 PLA igus] +[filament:prusa i3 PLA black fine] bed_temperature = 50 bridge_fan_speed = 100 -cooling = 0 +cooling = 1 disable_fan_first_layers = 1 -extrusion_multiplier = 0.9 -fan_always_on = 0 +extrusion_multiplier = 1 +fan_always_on = 1 fan_below_layer_time = 60 -filament_colour = #D0C9B0 +filament_colour = #FF0000 filament_diameter = 2.9 first_layer_bed_temperature = 50 -first_layer_temperature = 250 +first_layer_temperature = 200 max_fan_speed = 100 -min_fan_speed = 35 +min_fan_speed = 100 min_print_speed = 5 slowdown_below_layer_time = 15 -temperature = 250 +temperature = 200 -[filament:prusa i3 PLA rot] +[filament:prusa i3 PLA lila] bed_temperature = 50 bridge_fan_speed = 100 cooling = 1 @@ -134,8 +206,8 @@ disable_fan_first_layers = 1 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 60 -filament_colour = #FF0000 -filament_diameter = 2.9 +filament_colour = #8000FF +filament_diameter = 3 first_layer_bed_temperature = 50 first_layer_temperature = 200 max_fan_speed = 100 @@ -145,19 +217,19 @@ slowdown_below_layer_time = 15 temperature = 200 [presets] -filament = LULZBOT ABS fine.ini -print = prusa i3 100.ini -printer = LULZBOT ABS fine.ini +filament = MendelPro PLA fast.ini +print = Lulzbot fine.ini +printer = Lulzbot.ini -[print:LULZBOT ABS fine ] +[print:Lulzbot fine] avoid_crossing_perimeters = 1 -bottom_solid_layers = 2 -bridge_acceleration = 1000 -bridge_flow_ratio = 1.1 +bottom_solid_layers = 4 +bridge_acceleration = 0 +bridge_flow_ratio = 1 bridge_speed = 40 brim_width = 0 complete_objects = 0 -default_acceleration = 900 +default_acceleration = 0 dont_support_bridges = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 @@ -166,27 +238,27 @@ external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 -extrusion_width = 0.37 +extrusion_width = 0 fill_angle = 35 fill_density = 30% fill_pattern = line first_layer_acceleration = 0 -first_layer_extrusion_width = 0.37 -first_layer_height = 120% -first_layer_speed = 85% -gap_fill_speed = 45 +first_layer_extrusion_width = 0 +first_layer_height = 0.2 +first_layer_speed = 10 +gap_fill_speed = 20 gcode_comments = 0 -infill_acceleration = 1400 +infill_acceleration = 0 infill_every_layers = 2 infill_extruder = 1 -infill_extrusion_width = 0.6 +infill_extrusion_width = 110% infill_first = 0 infill_only_where_needed = 0 infill_overlap = 15% -infill_speed = 70 +infill_speed = 0 interface_shells = 0 -layer_height = 0.14 -max_print_speed = 80 +layer_height = 0.25 +max_print_speed = 100 max_volumetric_speed = 0 min_skirt_length = 0 notes = @@ -194,11 +266,11 @@ only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 1 -perimeter_acceleration = 900 +perimeter_acceleration = 0 perimeter_extruder = 1 -perimeter_extrusion_width = 0.34 -perimeter_speed = 40 -perimeters = 4 +perimeter_extrusion_width = 0 +perimeter_speed = 0 +perimeters = 3 post_process = raft_layers = 0 resolution = 0 @@ -206,12 +278,12 @@ seam_position = aligned skirt_distance = 6 skirt_height = 1 skirts = 2 -small_perimeter_speed = 30 +small_perimeter_speed = 20 solid_infill_below_area = 30 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 -solid_infill_speed = 60 +solid_infill_speed = 0 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 @@ -226,14 +298,14 @@ support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 -support_material_speed = 60 +support_material_speed = 0 support_material_threshold = 45 thin_walls = 1 threads = 2 -top_infill_extrusion_width = 0.35 -top_solid_infill_speed = 80% +top_infill_extrusion_width = 0 +top_solid_infill_speed = 30 top_solid_layers = 4 -travel_speed = 80 +travel_speed = 100 xy_size_compensation = 0 [print:MendelPro] @@ -241,7 +313,7 @@ avoid_crossing_perimeters = 0 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 -bridge_speed = 35 +bridge_speed = 40 brim_width = 0 complete_objects = 0 default_acceleration = 0 @@ -258,7 +330,7 @@ fill_angle = 45 fill_density = 15% fill_pattern = rectilinear first_layer_acceleration = 0 -first_layer_extrusion_width = 150% +first_layer_extrusion_width = 0 first_layer_height = 0.2 first_layer_speed = 10 gap_fill_speed = 10 @@ -273,9 +345,96 @@ infill_overlap = 15% infill_speed = 0 interface_shells = 0 layer_height = 0.2 -max_print_speed = 35 +max_print_speed = 80 max_volumetric_speed = 0 -min_skirt_length = 1 +min_skirt_length = 2 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 0 +perimeters = 2 +post_process = +raft_layers = 0 +resolution = 0 +seam_position = aligned +skirt_distance = 1 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 10 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 0 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 5 +support_material_speed = 0 +support_material_threshold = 40 +thin_walls = 1 +threads = 2 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 20 +top_solid_layers = 3 +travel_speed = 100 +xy_size_compensation = 0 + +[print:MendelPro fast] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 40 +brim_width = 0 +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 15% +fill_pattern = rectilinear +first_layer_acceleration = 0 +first_layer_extrusion_width = 0 +first_layer_height = 0.2 +first_layer_speed = 10 +gap_fill_speed = 10 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 15% +infill_speed = 0 +interface_shells = 0 +layer_height = 0.5 +max_print_speed = 80 +max_volumetric_speed = 0 +min_skirt_length = 2 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 @@ -410,44 +569,44 @@ top_solid_layers = 3 travel_speed = 100 xy_size_compensation = 0 -[print:prusa i3 100] +[print:Toy] avoid_crossing_perimeters = 0 -bottom_solid_layers = 3 +bottom_solid_layers = 2 bridge_acceleration = 0 bridge_flow_ratio = 1 -bridge_speed = 40 +bridge_speed = 0 brim_width = 0 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 -external_perimeter_speed = 10 +external_perimeter_speed = 0 external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0 fill_angle = 45 -fill_density = 20% +fill_density = 0% fill_pattern = rectilinear first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.2 first_layer_speed = 10 -gap_fill_speed = 10 +gap_fill_speed = 0 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 110% +infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 15% infill_speed = 0 interface_shells = 0 -layer_height = 0.1 -max_print_speed = 80 +layer_height = 0.2 +max_print_speed = 10 max_volumetric_speed = 0 min_skirt_length = 1 notes = @@ -459,15 +618,15 @@ perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 0 -perimeters = 3 +perimeters = 2 post_process = raft_layers = 0 resolution = 0 seam_position = aligned -skirt_distance = 6 +skirt_distance = 1 skirt_height = 1 -skirts = 3 -small_perimeter_speed = 10 +skirts = 1 +small_perimeter_speed = 0 solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 @@ -492,14 +651,14 @@ support_material_threshold = 40 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 -top_solid_infill_speed = 10 -top_solid_layers = 3 +top_solid_infill_speed = 0 +top_solid_layers = 0 travel_speed = 100 xy_size_compensation = 0 -[print:prusa i3 100 testtesttest] +[print:prusa i3 100] avoid_crossing_perimeters = 0 -bottom_solid_layers = 0 +bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 40 @@ -516,7 +675,7 @@ extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0 fill_angle = 45 -fill_density = 0% +fill_density = 20% fill_pattern = rectilinear first_layer_acceleration = 0 first_layer_extrusion_width = 0 @@ -546,14 +705,14 @@ perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 0 -perimeters = 1 +perimeters = 3 post_process = raft_layers = 0 resolution = 0 seam_position = aligned -skirt_distance = 1 +skirt_distance = 6 skirt_height = 1 -skirts = 1 +skirts = 3 small_perimeter_speed = 10 solid_infill_below_area = 70 solid_infill_every_layers = 0 @@ -580,7 +739,7 @@ thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 top_solid_infill_speed = 10 -top_solid_layers = 0 +top_solid_layers = 3 travel_speed = 100 xy_size_compensation = 0 @@ -763,14 +922,14 @@ avoid_crossing_perimeters = 0 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_flow_ratio = 1 -bridge_speed = 40 +bridge_speed = 60 brim_width = 0 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 -external_perimeter_speed = 10 +external_perimeter_speed = 20 external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 @@ -788,7 +947,7 @@ gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 110% +infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 15% @@ -825,13 +984,13 @@ spiral_vase = 0 standby_temperature_delta = -5 support_material = 1 support_material_angle = 0 -support_material_contact_distance = 0.2 +support_material_contact_distance = 0.3 support_material_enforce_layers = 0 support_material_extruder = 1 -support_material_extrusion_width = 0 +support_material_extrusion_width = 90% support_material_interface_extruder = 1 support_material_interface_layers = 2 -support_material_interface_spacing = 0 +support_material_interface_spacing = 2 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 5 @@ -845,7 +1004,7 @@ top_solid_layers = 3 travel_speed = 100 xy_size_compensation = 0 -[printer:LULZBOT ABS fine] +[printer:Lulzbot] bed_shape = 0x0,298x0,298x275,0x275 before_layer_gcode = end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors @@ -864,7 +1023,7 @@ retract_lift = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 20 -start_gcode = G28 ; home all axes +start_gcode = G28 ; home all axes\n toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 0 @@ -876,7 +1035,7 @@ z_offset = 0 [printer:MendelPro] bed_shape = 0x0,220x0,220x177,0x177 before_layer_gcode = -end_gcode = M104 S0 ; turn off temperature\nM140 S0;\nG28 X0 ; home X axis\nM84 ; disable motors\n +end_gcode = M104 S0 ; turn off temperature\nM140 S0;\nG28 X0 ; home X axis\nG0 Y177;\nM84 ; disable motors\n extruder_offset = 0x0 gcode_flavor = reprap layer_gcode = @@ -929,6 +1088,34 @@ vibration_limit = 0 wipe = 0 z_offset = 0 +[printer:Toyrep] +bed_shape = 0x0,125x0,125x125,0x125 +before_layer_gcode = +end_gcode = M104 S0 ; turn off nozzle temperature\nM84 ; disable motors +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = +nozzle_diameter = 0.4 +octoprint_apikey = +octoprint_host = +pressure_advance = 0 +retract_before_travel = 2 +retract_layer_change = 1 +retract_length = 0 +retract_length_toolchange = 3 +retract_lift = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 10 +start_gcode = \n +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +vibration_limit = 0 +wipe = 0 +z_offset = 0 + [printer:prusa i3] bed_shape = 0x0,190x0,190x190,0x190 before_layer_gcode =