X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/blobdiff_plain/a3536a82e526c522b6948e3aa37d8d76a81cf12d..ad87afaa652d71e2b83c070e56900e5c2b471161:/RepRap%2FChild.mw?ds=inline

diff --git a/RepRap%2FChild.mw b/RepRap%2FChild.mw
index ab4713f23..0a6f5931d 100644
--- a/RepRap%2FChild.mw
+++ b/RepRap%2FChild.mw
@@ -210,14 +210,14 @@ Natürlich gibt es manchmal Alternativen zu gewissen Teilen, dann sollten die ni
 ** 70 pcs - M3 Washer
 ** 40 pcs - M3 Regular Nut
 * M8:
-** 83 pcs - M8 Regular Nut
+** 83 pcs - M8 Regular Nut - '''01 pcs vorhanden'''
 ** 93 pcs - M8 Washer
 ** 06 pcs - M8x30/M10x30 Fender Washers     M4:
 ** 02 pcs - M4x20 Cap Screw
 ** 02 pcs - M4 Washer
 ** 02 pcs - M4 Regular Nut
 * Ball Bearing:
-** 3 - 608ZZ Ball Bearing
+** 3 - 608ZZ Ball Bearing - '''vorhanden'''
 * T5 Belts:
 ** 840mm (for Y axis)
 ** 950mm (for X axis)
@@ -231,13 +231,13 @@ Natürlich gibt es manchmal Alternativen zu gewissen Teilen, dann sollten die ni
 ** 1 pcs - 140mm x 225mm
 ** 1 pcs - 225mm x 225mm    
 * M8 Threaded Rod:
-** 6x 370mm (three per side)
-** 4x 294mm (front/rear)
-** 3x 440mm (top/bottom)
-** 2x 210mm (z-leadscrew)
-** 1x 50mm (x idler)
+** 6x 370mm (three per side) - '''vorhanden'''
+** 4x 294mm (front/rear) - '''vorhanden'''
+** 3x 440mm (top/bottom) - '''vorhanden'''
+** 2x 210mm (z-leadscrew) - '''vorhanden'''
+** 1x 50mm (x idler) - '''vorhanden'''
 * Feeder:
-** 2 pcs - 608zz Ball Bearing (option)
+** 2 pcs - 608zz Ball Bearing (option) - '''vorhanden'''
 ** 1 pcs - M8x50 Hex Bolt (Pre-hobbed)
 ** 1 pcs - M8 Nylock
 ** 4 pcs - M8 Washers
@@ -250,7 +250,7 @@ Natürlich gibt es manchmal Alternativen zu gewissen Teilen, dann sollten die ni
 ** 8 pcs - M3 Washers
 ** 4 pcs - M3 Nuts
 * Idler:
-** 1 pcs - 608zz Ball Bearing (option)
+** 1 pcs - 608zz Ball Bearing (option) - '''vorhanden'''
 ** 1 pcs - M8x20 Smooth Bar/Threaded Bar
 ** 4 pcs - M4x50 Hex Bolt
 ** 4 pcs - M4 Regural Nuts