X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/blobdiff_plain/d422cace94ee89fd5f43d1bf41f5f2a2c5474fe7..03f389f3e0066c54b57ea6a8450d25b638f57e27:/RepRap%2FConfigs%2FSlic3r%2FKasalehlia%2Fprinter.ini.mw

diff --git a/RepRap%2FConfigs%2FSlic3r%2FKasalehlia%2Fprinter.ini.mw b/RepRap%2FConfigs%2FSlic3r%2FKasalehlia%2Fprinter.ini.mw
new file mode 100644
index 000000000..364dc0cee
--- /dev/null
+++ b/RepRap%2FConfigs%2FSlic3r%2FKasalehlia%2Fprinter.ini.mw
@@ -0,0 +1,22 @@
+bed_size = 200,200
+end_gcode = M107; fan off\nM104 S0 ; turn off temperature\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.5
+print_center = 100,80
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+start_gcode = G28 X0 Y0 ; home X and Y\nG0 X60; move to X60\nG92 X0; set postition to X=0\nG28 Z0; home Z\nM106; fan on
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0