X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/blobdiff_plain/e2d7258fbd1e49faa7ea724c101a88b5b395111d..765c124e6a8007066a70e65baef7f85b5d3f6db5:/3D-Drucker%2FSlicerBundle.ini.mw diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw index 89f4e038c..bca5b64b7 100644 --- a/3D-Drucker%2FSlicerBundle.ini.mw +++ b/3D-Drucker%2FSlicerBundle.ini.mw @@ -1,8 +1,8 @@ -# generated by Slic3r 1.2.9 on Mon Nov 21 19:45:57 2016 +# generated by Slic3r 1.2.9 on Mon Jan 30 16:49:14 2017 [filament:1.75mm ABS] bed_temperature = 0 -bridge_fan_speed = 50 +bridge_fan_speed = 35 cooling = 1 disable_fan_first_layers = 1 extrusion_multiplier = 1 @@ -11,11 +11,11 @@ fan_below_layer_time = 60 filament_colour = #FFFFFF filament_diameter = 1.75 first_layer_bed_temperature = 0 -first_layer_temperature = 240 +first_layer_temperature = 250 max_fan_speed = 0 min_fan_speed = 0 min_print_speed = 5 -slowdown_below_layer_time = 30 +slowdown_below_layer_time = 10 temperature = 230 [filament:1.75mm Holz] @@ -33,26 +33,26 @@ first_layer_temperature = 200 max_fan_speed = 100 min_fan_speed = 50 min_print_speed = 5 -slowdown_below_layer_time = 30 +slowdown_below_layer_time = 10 temperature = 190 [filament:1.75mm PLA] bed_temperature = 50 bridge_fan_speed = 100 cooling = 1 -disable_fan_first_layers = 1 +disable_fan_first_layers = 3 extrusion_multiplier = 1 -fan_always_on = 1 +fan_always_on = 0 fan_below_layer_time = 60 filament_colour = #FFFFFF filament_diameter = 1.75 first_layer_bed_temperature = 50 -first_layer_temperature = 200 +first_layer_temperature = 220 max_fan_speed = 100 -min_fan_speed = 50 +min_fan_speed = 100 min_print_speed = 5 -slowdown_below_layer_time = 15 -temperature = 185 +slowdown_below_layer_time = 20 +temperature = 190 [filament:1.75mm PLA TinyBoy] bed_temperature = 0 @@ -69,12 +69,48 @@ first_layer_temperature = 200 max_fan_speed = 40 min_fan_speed = 35 min_print_speed = 5 -slowdown_below_layer_time = 15 -temperature = 190 +slowdown_below_layer_time = 10 +temperature = 200 + +[filament:2.70mm PLA] +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FF00FF +filament_diameter = 2.72 +first_layer_bed_temperature = 60 +first_layer_temperature = 220 +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 5 +slowdown_below_layer_time = 20 +temperature = 200 + +[filament:2.80mm PETG ] +bed_temperature = 75 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #B1EB96 +filament_diameter = 2.8 +first_layer_bed_temperature = 75 +first_layer_temperature = 245 +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 5 +slowdown_below_layer_time = 10 +temperature = 235 [filament:2.85mm ABS] bed_temperature = 100 -bridge_fan_speed = 50 +bridge_fan_speed = 35 cooling = 1 disable_fan_first_layers = 1 extrusion_multiplier = 1 @@ -87,29 +123,47 @@ first_layer_temperature = 250 max_fan_speed = 0 min_fan_speed = 0 min_print_speed = 5 -slowdown_below_layer_time = 20 -temperature = 230 +slowdown_below_layer_time = 10 +temperature = 235 [filament:2.85mm PETG ] bed_temperature = 75 bridge_fan_speed = 100 cooling = 1 -disable_fan_first_layers = 1 +disable_fan_first_layers = 3 extrusion_multiplier = 1 fan_always_on = 1 fan_below_layer_time = 60 filament_colour = #B1EB96 filament_diameter = 2.85 first_layer_bed_temperature = 75 -first_layer_temperature = 235 +first_layer_temperature = 245 max_fan_speed = 100 -min_fan_speed = 50 -min_print_speed = 10 -slowdown_below_layer_time = 30 +min_fan_speed = 100 +min_print_speed = 5 +slowdown_below_layer_time = 10 temperature = 235 [filament:2.85mm PLA] -bed_temperature = 50 +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #FF00FF +filament_diameter = 2.85 +first_layer_bed_temperature = 60 +first_layer_temperature = 220 +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 5 +slowdown_below_layer_time = 20 +temperature = 195 + +[filament:2.85mm PLA hot] +bed_temperature = 60 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 1 @@ -118,13 +172,13 @@ fan_always_on = 1 fan_below_layer_time = 60 filament_colour = #FF00FF filament_diameter = 2.85 -first_layer_bed_temperature = 50 -first_layer_temperature = 200 +first_layer_bed_temperature = 60 +first_layer_temperature = 215 max_fan_speed = 100 -min_fan_speed = 35 -min_print_speed = 10 +min_fan_speed = 100 +min_print_speed = 5 slowdown_below_layer_time = 10 -temperature = 185 +temperature = 215 [filament:2.85mm Willowflex] bed_temperature = 70 @@ -139,15 +193,15 @@ filament_diameter = 2.85 first_layer_bed_temperature = 70 first_layer_temperature = 160 max_fan_speed = 100 -min_fan_speed = 35 -min_print_speed = 10 -slowdown_below_layer_time = 10 +min_fan_speed = 50 +min_print_speed = 5 +slowdown_below_layer_time = 20 temperature = 160 [presets] -filament = 2.85mm Willowflex.ini -print = prusa i3.ini -printer = prusa i3.ini +filament = 2.80mm PETG .ini +print = Lulzbot.ini +printer = MendelPro.ini [print:Lulzbot] avoid_crossing_perimeters = 0 @@ -155,40 +209,40 @@ bottom_solid_layers = 4 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 60 -brim_width = 1 +brim_width = 2 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 -external_perimeter_speed = 40 +external_perimeter_speed = 30 external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0 -fill_angle = 35 +fill_angle = 45 fill_density = 20% fill_pattern = rectilinear first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.2 -first_layer_speed = 10 +first_layer_speed = 20 gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0 +infill_extrusion_width = 1.1 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 15% -infill_speed = 80 +infill_speed = 60 interface_shells = 0 layer_height = 0.2 -max_print_speed = 100 +max_print_speed = 130 max_volumetric_speed = 0 -min_skirt_length = 3 +min_skirt_length = 1 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 @@ -197,52 +251,52 @@ overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 -perimeter_speed = 80 +perimeter_speed = 60 perimeters = 3 post_process = raft_layers = 0 resolution = 0 -seam_position = nearest +seam_position = aligned skirt_distance = 6 skirt_height = 1 skirts = 1 small_perimeter_speed = 15 -solid_infill_below_area = 30 +solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 -solid_infill_speed = 60 +solid_infill_speed = 10 spiral_vase = 0 standby_temperature_delta = -5 -support_material = 0 +support_material = 1 support_material_angle = 0 -support_material_contact_distance = 0.2 +support_material_contact_distance = 0.4 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 -support_material_interface_speed = 40 -support_material_pattern = rectilinear -support_material_spacing = 2.5 +support_material_interface_speed = 30 +support_material_pattern = rectilinear-grid +support_material_spacing = 2 support_material_speed = 60 support_material_threshold = 0 -thin_walls = 1 +thin_walls = 0 threads = 2 top_infill_extrusion_width = 0 -top_solid_infill_speed = 40 -top_solid_layers = 4 +top_solid_infill_speed = 5 +top_solid_layers = 5 travel_speed = 130 xy_size_compensation = 0 [print:MendelPro] -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 +avoid_crossing_perimeters = 1 +bottom_solid_layers = 5 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 40 -brim_width = 1 +brim_width = 2 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 @@ -260,8 +314,8 @@ fill_pattern = rectilinear first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.2 -first_layer_speed = 10 -gap_fill_speed = 10 +first_layer_speed = 30 +gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 @@ -269,13 +323,13 @@ infill_extruder = 1 infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 15% -infill_speed = 0 +infill_overlap = 25% +infill_speed = 50 interface_shells = 0 layer_height = 0.2 max_print_speed = 80 max_volumetric_speed = 0 -min_skirt_length = 2 +min_skirt_length = 6 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 @@ -284,21 +338,21 @@ overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 -perimeter_speed = 0 -perimeters = 2 +perimeter_speed = 50 +perimeters = 3 post_process = raft_layers = 0 resolution = 0 seam_position = nearest -skirt_distance = 10 +skirt_distance = 6 skirt_height = 1 skirts = 1 -small_perimeter_speed = 10 +small_perimeter_speed = 20 solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 -solid_infill_speed = 0 +solid_infill_speed = 40 spiral_vase = 0 standby_temperature_delta = -5 support_material = 1 @@ -310,16 +364,16 @@ support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 -support_material_interface_speed = 100% -support_material_pattern = pillars +support_material_interface_speed = 40 +support_material_pattern = rectilinear support_material_spacing = 3 -support_material_speed = 60 +support_material_speed = 50 support_material_threshold = 0 thin_walls = 1 threads = 2 top_infill_extrusion_width = 0 -top_solid_infill_speed = 20 -top_solid_layers = 4 +top_solid_infill_speed = 40 +top_solid_layers = 5 travel_speed = 100 xy_size_compensation = 0 @@ -505,7 +559,7 @@ bridge_flow_ratio = 1 bridge_speed = 40 brim_width = 0 complete_objects = 0 -default_acceleration = 1000 +default_acceleration = 0 dont_support_bridges = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 @@ -517,7 +571,94 @@ extruder_clearance_radius = 20 extrusion_width = 0 fill_angle = 45 fill_density = 20% -fill_pattern = rectilinear +fill_pattern = honeycomb +first_layer_acceleration = 0 +first_layer_extrusion_width = 0 +first_layer_height = 0.3 +first_layer_speed = 10 +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 15% +infill_speed = 80 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 100 +max_volumetric_speed = 0 +min_skirt_length = 3 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 60 +perimeters = 3 +post_process = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 6 +skirt_height = 1 +skirts = 1 +small_perimeter_speed = 15 +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0 +solid_infill_speed = 40 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_contact_distance = 0.3 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 40 +support_material_pattern = rectilinear +support_material_spacing = 3 +support_material_speed = 40 +support_material_threshold = 0 +thin_walls = 1 +threads = 2 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 30 +top_solid_layers = 4 +travel_speed = 100 +xy_size_compensation = 0 + +[print:prusa i3 test] +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 40 +brim_width = 5 +complete_objects = 0 +default_acceleration = 0 +dont_support_bridges = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 20% +fill_pattern = honeycomb first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.2 @@ -559,22 +700,22 @@ solid_infill_below_area = 70 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 -solid_infill_speed = 60 +solid_infill_speed = 40 spiral_vase = 0 standby_temperature_delta = -5 support_material = 1 support_material_angle = 0 -support_material_contact_distance = 0.2 +support_material_contact_distance = 0 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 3 support_material_interface_spacing = 0 -support_material_interface_speed = 75% +support_material_interface_speed = 40 support_material_pattern = pillars -support_material_spacing = 2.5 -support_material_speed = 60 +support_material_spacing = 3 +support_material_speed = 40 support_material_threshold = 0 thin_walls = 1 threads = 2 @@ -587,7 +728,7 @@ xy_size_compensation = 0 [printer:Lulzbot] bed_shape = 0x0,298x0,298x275,0x275 before_layer_gcode = -end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors\n\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\n +end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors\n\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\nM355 S1;\nG4 P500;\nM355 S0;\nG4 P500;\n extruder_offset = 0x0 gcode_flavor = reprap layer_gcode = @@ -631,7 +772,7 @@ retract_lift = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 40 -start_gcode = G28 Z ; home Z\nG28 X Y ; home X Y\n +start_gcode = G28 Z ; home Z\nG28 X Y ; home X Y\nG0 Y40 ; clab move\n toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 0 @@ -709,15 +850,15 @@ octoprint_host = pressure_advance = 0 retract_before_travel = 2 retract_layer_change = 0 -retract_length = 3 +retract_length = 2 retract_length_toolchange = 10 retract_lift = 0 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 40 -start_gcode = G28 Z ; home Z\n;G0 Z1 ; lift Z\nG28 X Y ; home X Y\nG0 Y40 ; clab move +start_gcode = G28 Z ; home Z\n;G0 Z1 ; lift Z\nG28 X Y ; home X Y\nG0 Y40 ; clab move toolchange_gcode = M83 ; turn on relative movement for extruder \nG1 E-5 ; retract filament 5mm \nG1 X10 Y10 Z4.000000 ; home X and Y axis leave Z at current height \nM84 E ; release extruder stepper motor from 'holding' position \n@pause ; pause print! \nG1 E0 ; reset extruder, ready to push out plastic again \nM82 ; set extruder movement back to absolute ready for next layer -use_firmware_retraction = 1 +use_firmware_retraction = 0 use_relative_e_distances = 0 use_volumetric_e = 0 vibration_limit = 0