From: Daniel Bohrer Date: Sun, 12 Oct 2014 21:42:20 +0000 (+0000) Subject: ausgelagert aus [[RepRap/Configs/Slic3r]] X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/commitdiff_plain/26a57eec6d2282541e679e9c41e480e9a79973dd ausgelagert aus [[RepRap/Configs/Slic3r]] --- diff --git a/RepRap%2FConfigs%2FSlic3r%2Flarsan-old.ini.mw b/RepRap%2FConfigs%2FSlic3r%2Flarsan-old.ini.mw new file mode 100644 index 000000000..662c01404 --- /dev/null +++ b/RepRap%2FConfigs%2FSlic3r%2Flarsan-old.ini.mw @@ -0,0 +1,98 @@ +# generated by Slic3r 0.9.8-dev on Wed Nov 28 08:03:30 2012 +acceleration = 0 +bed_size = 180,200 +bed_temperature = 50 +bottom_solid_layers = 3 +bridge_fan_speed = 100 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +complete_objects = +cooling = +disable_fan_first_layers = 1 +duplicate = 1 +duplicate_distance = 6 +duplicate_grid = 1,1 +end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors +external_perimeter_speed = 40% +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 30 +extruder_offset = 0x0 +extrusion_axis = E +extrusion_multiplier = 1 +extrusion_width = 0 +fan_always_on = 0 +fan_below_layer_time = 60 +filament_diameter = 1.75 +fill_angle = 0 +fill_density = 0.15 +fill_pattern = honeycomb +first_layer_bed_temperature = 50 +first_layer_extrusion_width = 0 +first_layer_height = 0.27 +first_layer_speed = 15% +first_layer_temperature = 195 +g0 = 0 +gap_fill_speed = 20 +gcode_arcs = 0 +gcode_comments = 0 +gcode_flavor = reprap +infill_acceleration = 50 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_speed = 60 +layer_gcode = +layer_height = 0.24 +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 5 +min_skirt_length = 0 +notes = larsanconfig +nozzle_diameter = 0.35 +only_retract_when_crossing_perimeters = +output_filename_format = [input_filename_base].gcode +perimeter_acceleration = 25 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 50 +perimeters = 3 +post_process = +print_center = 90,100 +randomize_start = 1 +retract_before_travel = 5 +retract_length = 2 +retract_length_toolchange = 3 +retract_lift = 0 +retract_restart_extra = 0.01 +retract_restart_extra_toolchange = 0 +retract_speed = 50 +rotate = 0 +scale = 1 +skirt_distance = 20 +skirt_height = 1 +skirts = 3 +slowdown_below_layer_time = 50 +small_perimeter_speed = 100% +solid_fill_pattern = rectilinear +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_speed = 90% +start_gcode = G28 ; home all axes\nM92 E820 +support_material = +support_material_angle = 45 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 60 +support_material_threshold = 41 +temperature = 185 +threads = 2 +top_solid_infill_speed = 70% +top_solid_layers = 3 +travel_speed = 50 +use_relative_e_distances = 0 +vibration_limit = 0 +z_offset = 0