From: Daniel Bohrer <Daniel Bohrer@stratum0.org/mediawiki/>
Date: Sat, 17 Sep 2016 19:46:43 +0000 (+0000)
Subject: Presets sinnvoller benannt und typos raus
X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/commitdiff_plain/72944d6cba62aebb2d48b62a19ec788438ab3834

Presets sinnvoller benannt und typos raus
---

diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw
index 525321908..ae72525d6 100644
--- a/3D-Drucker%2FSlicerBundle.ini.mw
+++ b/3D-Drucker%2FSlicerBundle.ini.mw
@@ -1,6 +1,6 @@
 # generated by Slic3r 1.2.9 on Sun Aug 14 14:31:08 2016
 
-[filament:Lulzbot ABS]
+[filament:LulzBot ABS]
 bed_temperature = 100
 bridge_fan_speed = 50
 cooling = 1
@@ -18,7 +18,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 20
 temperature = 230
 
-[filament:Lulzbot PLA]
+[filament:LulzBot PLA]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
@@ -108,7 +108,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 30
 temperature = 185
 
-[filament:MendelPro Mistery]
+[filament:MendelPro Mystery]
 bed_temperature = 80
 bridge_fan_speed = 50
 cooling = 1
@@ -198,7 +198,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 190
 
-[filament:prusa i3 ABS grün]
+[filament:Prusa i3 ABS grün]
 bed_temperature = 100
 bridge_fan_speed = 70
 cooling = 1
@@ -216,7 +216,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 245
 
-[filament:prusa i3 ABS grün blau]
+[filament:Prusa i3 ABS grün blau]
 bed_temperature = 100
 bridge_fan_speed = 70
 cooling = 1
@@ -234,7 +234,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 30
 temperature = 235
 
-[filament:prusa i3 ABS schwarz]
+[filament:Prusa i3 ABS schwarz]
 bed_temperature = 100
 bridge_fan_speed = 70
 cooling = 1
@@ -252,7 +252,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 255
 
-[filament:prusa i3 PLA]
+[filament:Prusa i3 PLA]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
@@ -270,7 +270,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 30
 temperature = 190
 
-[filament:prusa i3 PLA lila]
+[filament:Prusa i3 PLA lila]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
@@ -288,7 +288,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 200
 
-[filament:prusa i3 PLA pink]
+[filament:Prusa i3 PLA pink]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
@@ -306,7 +306,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 15
 temperature = 180
 
-[print:Lulzbot fine]
+[print:LulzBot fine]
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -393,7 +393,7 @@ top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:Lulzbot fine sup]
+[print:LulzBot fine support]
 avoid_crossing_perimeters = 1
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -654,7 +654,7 @@ top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:MendelProSup]
+[print:MendelPro support]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -828,7 +828,7 @@ top_solid_layers = 4
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:TinyBoy sup]
+[print:TinyBoy support]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -915,7 +915,7 @@ top_solid_layers = 4
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:Toy]
+[print:ToyRep]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -1002,7 +1002,7 @@ top_solid_layers = 0
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:prusa i3 200]
+[print:Prusa i3 200]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -1089,7 +1089,7 @@ top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
 
-[print:prusa i3 200 sup]
+[print:Prusa i3 200 support]
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 0
@@ -1176,7 +1176,7 @@ top_solid_layers = 3
 travel_speed = 100
 xy_size_compensation = 0
 
-[printer:Lulzbot]
+[printer:LulzBot]
 bed_shape = 0x0,298x0,298x275,0x275
 before_layer_gcode = 
 end_gcode = M104 S0 ; turn off nozzle temperature\nM140 S0 ; turn off bed temperature\nG1 Y200 ;\nG28 X0 ; home X axis\nM84 ; disable motors
@@ -1260,7 +1260,7 @@ vibration_limit = 0
 wipe = 0
 z_offset = 0
 
-[printer:Toyrep]
+[printer:ToyRep]
 bed_shape = 0x0,125x0,125x125,0x125
 before_layer_gcode = 
 end_gcode = M104 S0 ; turn off nozzle temperature\nM84 ; disable motors
@@ -1288,7 +1288,7 @@ vibration_limit = 0
 wipe = 0
 z_offset = 0
 
-[printer:prusa i3]
+[printer:Prusa i3]
 bed_shape = 0x0,190x0,190x190,0x190
 before_layer_gcode = 
 end_gcode = M104 S0        ; turn off temperature\nM140 S0        ; turn off bed temp \nG28 X0           ; home X axis\nG0 Y190         ; präsent object\nM84               ; disable motors\nM81               ; Power off\n\n