From: Daniel Bohrer Date: Sun, 12 Oct 2014 21:41:13 +0000 (+0000) Subject: ausgelagert aus [[RepRap/Configs/Slic3r]] X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/commitdiff_plain/82db2ef513c0e1e7af1d215ddac344ee92c89cda ausgelagert aus [[RepRap/Configs/Slic3r]] --- diff --git a/RepRap%2FConfigs%2FSlic3r%2FKasalehlia%2Fsolid.ini.mw b/RepRap%2FConfigs%2FSlic3r%2FKasalehlia%2Fsolid.ini.mw new file mode 100644 index 000000000..e60b0ac52 --- /dev/null +++ b/RepRap%2FConfigs%2FSlic3r%2FKasalehlia%2Fsolid.ini.mw @@ -0,0 +1,77 @@ +avoid_crossing_perimeters = 0 +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 3 +complete_objects = 0 +default_acceleration = 0 +external_perimeter_speed = 70% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0 +fill_angle = 45 +fill_density = 0.3 +fill_pattern = honeycomb +first_layer_acceleration = 0 +first_layer_extrusion_width = 200% +first_layer_height = 0.22 +first_layer_speed = 30% +gap_fill_speed = 20 +gcode_comments = 0 +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_speed = 60 +layer_height = 0.22 +min_skirt_length = 0 +notes = +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 50 +perimeters = 3 +post_process = +raft_layers = 0 +randomize_start = 0 +resolution = 0 +skirt_distance = 6 +skirt_height = 1 +skirts = 2 +small_perimeter_speed = 40 +solid_fill_pattern = concentric +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extrusion_width = 0 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +start_perimeters_at_concave_points = 0 +start_perimeters_at_non_overhang = 0 +support_material = 0 +support_material_angle = 0 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 0 +support_material_interface_spacing = 0 +support_material_pattern = rectilinear +support_material_spacing = 2.5 +support_material_speed = 60 +support_material_threshold = 0 +thin_walls = 1 +threads = 2 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 50 +top_solid_layers = 5 +travel_speed = 130