From: Sintox Date: Sun, 8 Mar 2015 19:58:44 +0000 (+0000) Subject: Die Seite wurde neu angelegt: „avoid_crossing_perimeters = 0 bed_shape = 0x0,200x0... X-Git-Url: https://git.rohieb.name/stratum0-wiki.git/commitdiff_plain/a32b40b45800fd38e303fc32cc34d438449a11f7 Die Seite wurde neu angelegt: „avoid_crossing_perimeters = 0 bed_shape = 0x0,200x0,200x200,0x200 bed_temperature = 80 bottom_solid_layers = 3 bridge_acceleration = 0 bridge_fan_speed = 100 b…“ --- diff --git a/RepRap%2FConfigs%2FSlic3r%2FSintox%2Fabs_gross.ini.mw b/RepRap%2FConfigs%2FSlic3r%2FSintox%2Fabs_gross.ini.mw new file mode 100644 index 000000000..2998d467c --- /dev/null +++ b/RepRap%2FConfigs%2FSlic3r%2FSintox%2Fabs_gross.ini.mw @@ -0,0 +1,119 @@ +avoid_crossing_perimeters = 0 +bed_shape = 0x0,200x0,200x200,0x200 +bed_temperature = 80 +bottom_solid_layers = 3 +bridge_acceleration = 0 +bridge_fan_speed = 100 +bridge_flow_ratio = 1 +bridge_speed = 60 +brim_width = 0 +complete_objects = 0 +cooling = 1 +default_acceleration = 0 +disable_fan_first_layers = 1 +dont_support_bridges = 1 +duplicate_distance = 6 +end_gcode = M84 ; disable motors\nM104 S0 ; turn off extruder temperature\nG0 X0 ; move X axis to 0\nG1 Y198 F6000 ; drive print table all the way out\nM84 ; disable motors\n +external_perimeter_extrusion_width = 0 +external_perimeter_speed = 70% +external_perimeters_first = 0 +extra_perimeters = 1 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extruder_offset = 0x0 +extrusion_axis = E +extrusion_multiplier = 1 +extrusion_width = 0 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_diameter = 1.75 +fill_angle = 45 +fill_density = 35% +fill_pattern = honeycomb +first_layer_acceleration = 0 +first_layer_bed_temperature = 80 +first_layer_extrusion_width = 200% +first_layer_height = 0.25 +first_layer_speed = 50% +first_layer_temperature = 240 +gap_fill_speed = 20 +gcode_arcs = 0 +gcode_comments = 0 +gcode_flavor = reprap +infill_acceleration = 0 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0 +infill_first = 0 +infill_only_where_needed = 0 +infill_speed = 70 +interface_shells = 0 +layer_gcode = +layer_height = 0.2 +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +min_skirt_length = 0 +notes = +nozzle_diameter = 0.5 +only_retract_when_crossing_perimeters = 1 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 0 +perimeter_extruder = 1 +perimeter_extrusion_width = 0 +perimeter_speed = 80 +perimeters = 3 +post_process = +raft_layers = 0 +resolution = 0 +retract_before_travel = 2 +retract_layer_change = 1 +retract_length = 5 +retract_length_toolchange = 10 +retract_lift = 1 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 40 +seam_position = aligned +skirt_distance = 2 +skirt_height = 1 +skirts = 1 +slowdown_below_layer_time = 30 +small_perimeter_speed = 30 +solid_fill_pattern = rectilinear +solid_infill_below_area = 70 +solid_infill_every_layers = 0 +solid_infill_extrusion_width = 0 +solid_infill_speed = 70 +spiral_vase = 0 +standby_temperature_delta = -5 +start_gcode = G28 X0 Y0 ; home X and Y\nG0 X60; move to X60\nG92 X0; set postition to X=0\nG92 Y40; set position to Y=0\nG28 Z0; home Z +support_material = 1 +support_material_angle = 0 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2.5 +support_material_speed = 20 +support_material_threshold = 0 +temperature = 240 +thin_walls = 1 +threads = 2 +toolchange_gcode = +top_infill_extrusion_width = 0 +top_solid_infill_speed = 60 +top_solid_layers = 4 +travel_speed = 130 +use_firmware_retraction = 0 +use_relative_e_distances = 0 +vibration_limit = 0 +wipe = 0 +xy_size_compensation = 0 +z_offset = 0