From 1023dba39af67d631a80f524c49a46a25244ab40 Mon Sep 17 00:00:00 2001
From: Daniel Bohrer <Daniel Bohrer@stratum0.org/mediawiki/>
Date: Sat, 17 Sep 2016 19:46:44 +0000
Subject: [PATCH] =?utf8?q?preset=20f=C3=BCr=20LulzBot=20PLA=20von=20DAS=20?=
 =?utf8?q?FILAMENT,=20LulzBot=20PLA=20black=20raus,=20existiert=20nicht=20?=
 =?utf8?q?mehr=3F?=
MIME-Version: 1.0
Content-Type: text/plain; charset=utf8
Content-Transfer-Encoding: 8bit

---
 3D-Drucker%2FSlicerBundle.ini.mw | 24 +++---------------------
 1 file changed, 3 insertions(+), 21 deletions(-)

diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw
index ae72525d6..2694095ec 100644
--- a/3D-Drucker%2FSlicerBundle.ini.mw
+++ b/3D-Drucker%2FSlicerBundle.ini.mw
@@ -36,7 +36,7 @@ min_print_speed = 5
 slowdown_below_layer_time = 30
 temperature = 200
 
-[filament:Lulzbot PLA Weiß]
+[filament:LulzBot PLA DAS FILAMENT]
 bed_temperature = 50
 bridge_fan_speed = 100
 cooling = 1
@@ -47,30 +47,12 @@ fan_below_layer_time = 60
 filament_colour = #FFFFFF
 filament_diameter = 2.85
 first_layer_bed_temperature = 50
-first_layer_temperature = 200
+first_layer_temperature = 220
 max_fan_speed = 100
 min_fan_speed = 30
 min_print_speed = 5
 slowdown_below_layer_time = 30
-temperature = 180
-
-[filament:Lulzbot PLA black]
-bed_temperature = 50
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #000000
-filament_diameter = 2.9
-first_layer_bed_temperature = 50
-first_layer_temperature = 200
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 5
-slowdown_below_layer_time = 30
-temperature = 200
+temperature = 215
 
 [filament:MendelPro ABS]
 bed_temperature = 0
-- 
2.20.1