From 6492aea77bdec9e3f5d93d544af521beea93f4df Mon Sep 17 00:00:00 2001
From: Larsan <Larsan@stratum0.org/mediawiki/>
Date: Wed, 28 Nov 2012 07:39:20 +0000
Subject: [PATCH] /* Von larsan */ config aktualisiert

---
 RepRap.mw | 71 ++++++++++++++++++++++++++++---------------------------
 1 file changed, 36 insertions(+), 35 deletions(-)

diff --git a/RepRap.mw b/RepRap.mw
index 6bc79efc3..c677ad513 100644
--- a/RepRap.mw
+++ b/RepRap.mw
@@ -66,81 +66,81 @@ Im [[Reprap/Logbuch|Logbuch]] ist eine Liste der bisher gedruckten Teile.
 ===[[Reprap/Configs|Konfigurationen für den Slicer]]===
 Es gibt vermutlich nicht ''die eine Ideal-Konfiguration'' die für alle Teile gut funktioniert, mit den hier gelisteten sollte aber ein Druck einigermaßen gelingen.
 ==== Von larsan ====
-Mit Support etc. aktiviert. In etwa die Config vom Twilight-Druck
 
 <pre style="height:200px;overflow:scroll;">
-# generated by Slic3r 0.9.4-dev on Sat Nov  3 17:46:55 2012
+# generated by Slic3r 0.9.8-dev on Wed Nov 28 08:03:30 2012
 acceleration = 0
 bed_size = 180,200
-bed_temperature = 60
+bed_temperature = 50
 bottom_solid_layers = 3
 bridge_fan_speed = 100
-bridge_flow_ratio = 1.05
+bridge_flow_ratio = 1
 bridge_speed = 60
 brim_width = 0
 complete_objects = 
-cooling = 1
+cooling = 
 disable_fan_first_layers = 1
 duplicate = 1
 duplicate_distance = 6
 duplicate_grid = 1,1
 end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0    ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84     ; disable motors
-external_perimeter_speed = 100%
+external_perimeter_speed = 40%
 extra_perimeters = 1
 extruder_clearance_height = 20
 extruder_clearance_radius = 30
 extruder_offset = 0x0
 extrusion_axis = E
-extrusion_multiplier = 1.02
-extrusion_width = 100%
+extrusion_multiplier = 1
+extrusion_width = 0
 fan_always_on = 0
 fan_below_layer_time = 60
 filament_diameter = 1.75
-fill_angle = 45
-fill_density = 0.25
+fill_angle = 0
+fill_density = 0.15
 fill_pattern = honeycomb
-first_layer_bed_temperature = 60
-first_layer_extrusion_width = 90%
-first_layer_height = 95%
-first_layer_speed = 25%
-first_layer_temperature = 200
+first_layer_bed_temperature = 50
+first_layer_extrusion_width = 0
+first_layer_height = 0.27
+first_layer_speed = 15%
+first_layer_temperature = 195
 g0 = 0
+gap_fill_speed = 20
 gcode_arcs = 0
 gcode_comments = 0
 gcode_flavor = reprap
 infill_acceleration = 50
 infill_every_layers = 1
 infill_extruder = 1
-infill_extrusion_width = 120%
-infill_speed = 70
+infill_extrusion_width = 0
+infill_speed = 60
 layer_gcode = 
-layer_height = 0.3
+layer_height = 0.24
 max_fan_speed = 100
 min_fan_speed = 35
 min_print_speed = 5
 min_skirt_length = 0
 notes = larsanconfig
 nozzle_diameter = 0.35
-only_retract_when_crossing_perimeters = 1
-output_filename_format = [timestamp]_[input_filename_base].gcode
+only_retract_when_crossing_perimeters = 
+output_filename_format = [input_filename_base].gcode
 perimeter_acceleration = 25
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 40
-perimeters = 2
+perimeter_speed = 50
+perimeters = 3
 post_process = 
 print_center = 90,100
 randomize_start = 1
-retract_before_travel = 4
+retract_before_travel = 5
 retract_length = 2
 retract_length_toolchange = 3
 retract_lift = 0
-retract_restart_extra = 0
+retract_restart_extra = 0.01
 retract_restart_extra_toolchange = 0
 retract_speed = 50
 rotate = 0
 scale = 1
-skirt_distance = 10
+skirt_distance = 20
 skirt_height = 1
 skirts = 3
 slowdown_below_layer_time = 50
@@ -148,23 +148,24 @@ small_perimeter_speed = 100%
 solid_fill_pattern = rectilinear
 solid_infill_below_area = 0
 solid_infill_every_layers = 0
-solid_infill_speed = 100%
+solid_infill_speed = 90%
 start_gcode = G28 ; home all axes\nM92 E820
-support_material = 1
+support_material = 
 support_material_angle = 45
 support_material_extruder = 1
-support_material_extrusion_width = 160%
+support_material_extrusion_width = 0
 support_material_pattern = rectilinear
 support_material_spacing = 2
-support_material_threshold = 40
-temperature = 200
+support_material_speed = 60
+support_material_threshold = 41
+temperature = 185
 threads = 2
-top_solid_infill_speed = 40%
-top_solid_layers = 2
-travel_speed = 90
+top_solid_infill_speed = 70%
+top_solid_layers = 3
+travel_speed = 50
 use_relative_e_distances = 0
-z_offset = 0.20
-
+vibration_limit = 0
+z_offset = 0
 </pre>
 
 ==== Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ====
-- 
2.20.1