From 7cb0ddf2255b07c0778041aab5aa70ea2b2f6e94 Mon Sep 17 00:00:00 2001 From: NoikK Date: Tue, 26 Apr 2016 21:54:12 +0000 Subject: [PATCH] =?utf8?q?TynyRep=20Daten=20wurden=20ver=C3=A4ndert.?= MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit --- 3D-Drucker%2FSlicerBundle.ini.mw | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/3D-Drucker%2FSlicerBundle.ini.mw b/3D-Drucker%2FSlicerBundle.ini.mw index be7113993..1bf992983 100644 --- a/3D-Drucker%2FSlicerBundle.ini.mw +++ b/3D-Drucker%2FSlicerBundle.ini.mw @@ -1,4 +1,4 @@ -# generated by Slic3r 1.2.9 on Sun Apr 24 23:42:45 2016 +# generated by Slic3r 1.2.9 on Tue Apr 26 23:46:04 2016 [filament:LULZBOT PLA] bed_temperature = 50 @@ -41,14 +41,14 @@ bed_temperature = 0 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 2 -extrusion_multiplier = 1 +extrusion_multiplier = 0.9 fan_always_on = 1 fan_below_layer_time = 60 filament_colour = #35E1FF filament_diameter = 1.7 first_layer_bed_temperature = 0 first_layer_temperature = 200 -max_fan_speed = 100 +max_fan_speed = 50 min_fan_speed = 35 min_print_speed = 5 slowdown_below_layer_time = 15 @@ -74,7 +74,7 @@ temperature = 180 [presets] filament = TinyBoy PLA.ini -print = MendelPro.ini +print = TinyBoy.ini printer = MendelPro.ini [print:LULZBOT] @@ -113,7 +113,7 @@ infill_only_where_needed = 0 infill_overlap = 15% infill_speed = 80 interface_shells = 0 -layer_height = 0.4 +layer_height = 0.2 max_print_speed = 80 max_volumetric_speed = 0 min_skirt_length = 0 @@ -200,7 +200,7 @@ infill_only_where_needed = 0 infill_overlap = 15% infill_speed = 0 interface_shells = 0 -layer_height = 0.4 +layer_height = 0.2 max_print_speed = 35 max_volumetric_speed = 0 min_skirt_length = 1 @@ -287,7 +287,7 @@ infill_only_where_needed = 0 infill_overlap = 15% infill_speed = 0 interface_shells = 0 -layer_height = 0.4 +layer_height = 0.2 max_print_speed = 80 max_volumetric_speed = 0 min_skirt_length = 1 -- 2.20.1