From dfc1707af6a71f2ca75ff0118a7bf0fc656ad5c3 Mon Sep 17 00:00:00 2001
From: Daniel Bohrer
Date: Fri, 16 Nov 2012 20:01:38 +0000
Subject: [PATCH] /* Schnelle Config von Daniel Bohrer (Work in Progress) */
aktualisiert und Notizen
---
RepRap.mw | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/RepRap.mw b/RepRap.mw
index 1feaa3c11..82b4dff2d 100644
--- a/RepRap.mw
+++ b/RepRap.mw
@@ -168,8 +168,9 @@ z_offset = 0.20
==== Schnelle Config von [[Benutzer:Daniel Bohrer|Daniel Bohrer]] (Work in Progress) ====
+Der erste und letzte Layer wird "normal schnell" gedruckt, die anderen doppelt so schnell. Bei dünnen Strukturen (z.B. Mate-Tags) muss man notfalls noch ein bisschen mit der Perimeteranzahl spielen.
-# generated by Slic3r 0.9.4-dev on Tue Oct 23 23:01:34 2012
+# generated by Slic3r 0.9.4-dev on Fri Nov 16 20:55:02 2012
acceleration = 0
bed_size = 180,200
bed_temperature = 60
@@ -185,7 +186,7 @@ duplicate_distance = 6
duplicate_grid = 1,1
end_gcode = M104 S0 ; turn off extruder temperature\nM140 S0 ; turn off bed temperature \nG28 X0 ; home X axis\nG92 Z0 E1\nG1 Z10 E0 F3000 ; retract extruder and filament\nG1 Y180 F6000 ; drive print table all the way out\nM84 ; disable motors
external_perimeter_speed = 90%
-extra_perimeters =
+extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
@@ -195,12 +196,12 @@ extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 1.75
-fill_angle = 45
-fill_density = 0.3
+fill_angle = 0
+fill_density = 0.2
fill_pattern = rectilinear
first_layer_bed_temperature = 60
first_layer_extrusion_width = 0
-first_layer_height = 120%
+first_layer_height = 100%
first_layer_speed = 20%
first_layer_temperature = 195
g0 = 0
@@ -213,7 +214,7 @@ infill_extruder = 1
infill_extrusion_width = 0
infill_speed = 120
layer_gcode =
-layer_height = 0.28
+layer_height = 0.25
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
@@ -244,21 +245,21 @@ skirts = 2
slowdown_below_layer_time = 60
small_perimeter_speed = 80%
solid_fill_pattern = rectilinear
-solid_infill_below_area = 70
+solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_speed = 100%
solid_layers = 3
start_gcode = G28 ; home all axes\nM92 E820
-support_material =
+support_material = 1
support_material_angle = 45
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_pattern = rectilinear
-support_material_spacing = 2.5
+support_material_spacing = 3
support_material_threshold = 45
temperature = 185
threads = 3
-top_solid_infill_speed = 60
+top_solid_infill_speed = 50%
travel_speed = 140
use_relative_e_distances = 0
z_offset = 0.22
--
2.20.1