badge/main.c

   1 /**************************************************************************/
   2 /*!
   3     @file     main.c
   4     @author   K. Townsend (microBuilder.eu)
   5
   6     @section LICENSE
   7
   8     Software License Agreement (BSD License)
   9
  10     Copyright (c) 2011, microBuilder SARL
  11     All rights reserved.
  12
  13     Redistribution and use in source and binary forms, with or without
  14     modification, are permitted provided that the following conditions are met:
  15     1. Redistributions of source code must retain the above copyright
  16     notice, this list of conditions and the following disclaimer.
  17     2. Redistributions in binary form must reproduce the above copyright
  18     notice, this list of conditions and the following disclaimer in the
  19     documentation and/or other materials provided with the distribution.
  20     3. Neither the name of the copyright holders nor the
  21     names of its contributors may be used to endorse or promote products
  22     derived from this software without specific prior written permission.
  23
  24     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
  25     EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
  26     WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  27     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
  28     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
  29     (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
  30     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
  31     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  32     (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
  33     SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  34 */
  35 /**************************************************************************/
  36 #include <stdlib.h>
  37 #include <stdio.h>
  38 #include <string.h>
  39
  40 #include "projectconfig.h"
  41 #include "sysinit.h"
  42
  43 #include "core/adc/adc.h"
  44 #include "core/cpu/cpu.h"
  45 #include "core/pmu/pmu.h"
  46 #include "core/wdt/wdt.h"
  47 #include "core/gpio/gpio.h"
  48 #include "core/ssp/ssp.h"
  49 #include "core/systick/systick.h"
  50 #include "core/usbhid-rom/usbmsc.h"
  51
  52 #ifdef CFG_INTERFACE
  53   #include "core/cmd/cmd.h"
  54 #endif
  55
  56 #include "fahrplan.h"
  57 #include "init.h"
  58 #include "ui/browser.h"
  59 #include "ui/display.h"
  60 #include "ui/event.h"
  61 #include "ui/font.h"
  62 #include "ui/menu.h"
  63 #include "ui/sprite.h"
  64 #include "ui/vanity.h"
  65 #include "util/util.h"
  66 #include "jumpnrun/jumpnrun.h"
  67
  68 #include "dataflash/at45db041d.h"
  69
  70 #include "drivers/fatfs/ff.h"
  71
  72 #include "badge/pinconfig.h"
  73 #include <funk/nrf24l01p.h>
  74
  75 #ifdef R0KET
  76
  77 #include "r0ketports.h"
  78 void rbBacklightInit(void) {
  79   /* Enable the clock for CT16B1 */
  80   SCB_SYSAHBCLKCTRL |= (SCB_SYSAHBCLKCTRL_CT16B1);
  81
  82   /* Configure PIO1.9 as Timer1_16 MAT0 Output */
  83   IOCON_PIO1_9 &= ~IOCON_PIO1_9_FUNC_MASK;
  84   IOCON_PIO1_9 |=  IOCON_PIO1_9_FUNC_CT16B1_MAT0;
  85
  86   /* Set default duty cycle (MR1) */
  87   TMR_TMR16B1MR0 = 0; //(0xFFFF * (100 - brightness)) / 100;
  88
  89   /* External Match Register Settings for PWM */
  90   TMR_TMR16B1EMR = TMR_TMR16B1EMR_EMC0_TOGGLE | TMR_TMR16B1EMR_EM0;
  91
  92   /* enable Timer1 */
  93   TMR_TMR16B1TCR = TMR_TMR16B1TCR_COUNTERENABLE_ENABLED;
  94
  95   /* Enable PWM0 */
  96   TMR_TMR16B1PWMC = TMR_TMR16B1PWMC_PWM0_ENABLED;
  97
  98   // Enable Step-UP
  99   gpioSetDir(RB_PWR_LCDBL, gpioDirection_Output);
 100   gpioSetValue(RB_PWR_LCDBL, 0);
 101 }
 102
 103 void rbInit() {
 104   RB_HB0_IO &= ~IOCON_SWDIO_PIO1_3_FUNC_MASK;
 105   RB_HB0_IO |=  IOCON_SWDIO_PIO1_3_FUNC_GPIO;
 106   RB_HB1_IO &= ~IOCON_JTAG_TCK_PIO0_10_FUNC_MASK;
 107   RB_HB1_IO |=  IOCON_JTAG_TCK_PIO0_10_FUNC_GPIO;
 108
 109   struct {
 110     int port;
 111     int pin;
 112     uint32_t volatile *reg;
 113     gpioPullupMode_t mode;
 114   } const input_pins[] = {
 115 #ifdef HOB_REV2
 116     { RB_BTN0    , &RB_BTN0_IO    , gpioPullupMode_PullDown },
 117     { RB_BTN1    , &RB_BTN1_IO    , gpioPullupMode_PullDown },
 118     { RB_BTN2    , &RB_BTN2_IO    , gpioPullupMode_PullDown },
 119     { RB_BTN3    , &RB_BTN3_IO    , gpioPullupMode_PullDown },
 120     { RB_BTN4    , &RB_BTN4_IO    , gpioPullupMode_PullDown },
 121     { RB_HB0     , &RB_HB0_IO     , gpioPullupMode_PullDown },
 122     { RB_HB1     , &RB_HB1_IO     , gpioPullupMode_PullDown },
 123     { RB_PWR_CHRG, &RB_PWR_CHRG_IO, gpioPullupMode_PullDown }
 124 #else
 125     { RB_BTN0    , &RB_BTN0_IO    , gpioPullupMode_PullUp },
 126     { RB_BTN1    , &RB_BTN1_IO    , gpioPullupMode_PullUp },
 127     { RB_BTN2    , &RB_BTN2_IO    , gpioPullupMode_PullUp },
 128     { RB_BTN3    , &RB_BTN3_IO    , gpioPullupMode_PullUp },
 129     { RB_BTN4    , &RB_BTN4_IO    , gpioPullupMode_PullUp },
 130     { RB_HB0     , &RB_HB0_IO     , gpioPullupMode_PullUp },
 131     { RB_HB1     , &RB_HB1_IO     , gpioPullupMode_PullUp },
 132     { RB_PWR_CHRG, &RB_PWR_CHRG_IO, gpioPullupMode_PullUp }
 133 #endif
 134   };
 135
 136   for(int i = 0; i < ARRAY_SIZE(input_pins); ++i) {
 137     gpioSetDir(input_pins[i].port, input_pins[i].pin, gpioDirection_Input);
 138     gpioSetPullup(input_pins[i].reg, input_pins[i].mode);
 139   }
 140
 141   // LED3 zur Bestimmung der Umgebungshelligkeit.
 142   gpioSetDir(RB_LED3, gpioDirection_Input);
 143   RB_LED3_IO = (RB_LED3_IO & IOCON_PIO1_11_FUNC_MASK) | IOCON_PIO1_11_FUNC_AD7;
 144
 145   // prepare LEDs
 146   IOCON_JTAG_TDI_PIO0_11 &= ~IOCON_JTAG_TDI_PIO0_11_FUNC_MASK;
 147   IOCON_JTAG_TDI_PIO0_11 |=  IOCON_JTAG_TDI_PIO0_11_FUNC_GPIO;
 148
 149   struct {
 150     int port;
 151     int pin;
 152     int value;
 153   } const output_pins[] = {
 154     { RB_PWR_GOOD , 0 },
 155     { USB_CONNECT , 1 },
 156     { RB_LCD_CS   , 1 },
 157     { RB_SPI_CS_DF, 1 },
 158     { RB_SPI_SS2 , 1 },
 159     { RB_SPI_SS3 , 1 },
 160     { RB_SPI_SS4 , 1 },
 161     { RB_SPI_SS5 , 1 },
 162     { RB_LED0    , 0 },
 163     { RB_LED1    , 0 },
 164     { RB_LED2    , 0 },
 165     { RB_LCD_BL  , 0 },
 166     { RB_HB2     , 1 },
 167     { RB_HB3     , 1 },
 168     { RB_HB4     , 1 },
 169     { RB_HB5     , 1 }
 170   };
 171
 172   for(int i = 0; i < ARRAY_SIZE(output_pins); ++i) {
 173     gpioSetDir  (output_pins[i].port, output_pins[i].pin, gpioDirection_Output);
 174     gpioSetValue(output_pins[i].port, output_pins[i].pin, output_pins[i].value);
 175   }
 176
 177   // Set P0.0 to GPIO
 178   RB_PWR_LCDBL_IO &= ~RB_PWR_LCDBL_IO_FUNC_MASK;
 179   RB_PWR_LCDBL_IO |=  RB_PWR_LCDBL_IO_FUNC_GPIO;
 180
 181   gpioSetDir   ( RB_PWR_LCDBL   , gpioDirection_Input);
 182   gpioSetPullup(&RB_PWR_LCDBL_IO, gpioPullupMode_Inactive);
 183
 184   rbBacklightInit();
 185   badge_display_init();
 186 }
 187
 188 #endif
 189
 190 static void usbmode(void) {
 191   badge_event_stop();
 192
 193   badge_framebuffer fb = { { { 0 } } };
 194
 195   badge_framebuffer_render_text(&fb, 23, 30, "USB-Modus");
 196 /*
 197     badge_framebuffer_render_number(&fb, 23, 50, sizeof(jumpnrun_tile));
 198     badge_framebuffer_render_number(&fb, 33, 50, sizeof(jumpnrun_item));
 199     badge_framebuffer_render_number(&fb, 48, 50, sizeof(jumpnrun_enemy));
 200 */
 201   badge_framebuffer_flush(&fb);
 202   usbMSCInit();
 203   for(;;);
 204 }
 205
 206 uint8_t main_menu_show(uint8_t selected) {
 207   char const menu_buf[][15] = {
 208     "Vanity-Screen",
 209     "Super Hackio",
 210     "Fahrplan",
 211     "USB-Modus"
 212   };
 213
 214   char const *menu[ARRAY_SIZE(menu_buf)];
 215   for(uint8_t i = 0; i < ARRAY_SIZE(menu_buf); ++i) {
 216     menu[i] = menu_buf[i];
 217   }
 218
 219   f_chdir("/");
 220   // first_visible = 0, weil Menü so kurz. Ggf. Parameter aus main_menu empfangen und merken.
 221   size_t first_visible = 0;
 222   return (uint8_t) badge_menu(menu, ARRAY_SIZE(menu), &first_visible, selected);
 223 }
 224
 225 void main_menu(void) {
 226   uint8_t selected = 0;
 227
 228   for(;;) {
 229     selected = main_menu_show(selected);
 230     switch(selected) {
 231     case 0: badge_vanity_show(); break;
 232     case 1: jumpnrun_play    (); break;
 233     case 2: badge_fahrplan   (); break;
 234     case 3: usbmode          (); break;
 235     }
 236   }
 237 }
 238
 239 int main(void)
 240 {
 241   cpuInit();
 242   systickInit(CFG_SYSTICK_DELAY_IN_MS);
 243
 244   // pmuInit();
 245   // adcInit();
 246 #ifdef R0KET
 247   rbInit();
 248 #else
 249   badge_init();
 250 #endif
 251
 252   FATFS fs;
 253   f_mount(0, &fs);
 254
 255   if(badge_input_raw() & BADGE_EVENT_KEY_DOWN) {
 256     usbmode();
 257   }
 258
 259   badge_event_start();
 260   main_menu();
 261
 262   return 0;
 263 }