target/linux/ixp4xx/patches-2.6.23/120-compex_support.patch

   1 diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig
   2 --- linux-2.6.23/arch/arm/mach-ixp4xx/Kconfig   2007-10-23 18:03:34.000000000 +0200
   3 +++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Kconfig      2007-10-23 18:22:41.000000000 +0200
   4 @@ -65,6 +65,14 @@
   5           Engineering Pronghorn Metro Platform. For more
   6           information on this platform, see <file:Documentation/arm/IXP4xx>.
   7
   8 +config MACH_COMPEX
   9 +       bool "Compex WP18 / NP18A"
  10 +       select PCI
  11 +       help
  12 +         Say 'Y' here if you want your kernel to support Compex'
  13 +         WP18 or NP18A boards. For more information on this
  14 +         platform, see http://openwrt.org
  15 +
  16  config ARCH_IXDP425
  17         bool "IXDP425"
  18         help
  19 diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/Makefile linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile
  20 --- linux-2.6.23/arch/arm/mach-ixp4xx/Makefile  2007-10-23 18:03:34.000000000 +0200
  21 +++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/Makefile     2007-10-23 18:22:41.000000000 +0200
  22 @@ -17,6 +17,7 @@
  23  obj-pci-$(CONFIG_MACH_WG302V2)         += wg302v2-pci.o
  24  obj-pci-$(CONFIG_MACH_FSG)             += fsg-pci.o
  25  obj-pci-$(CONFIG_MACH_PRONGHORNMETRO)  += pronghornmetro-pci.o
  26 +obj-pci-$(CONFIG_MACH_COMPEX)          += ixdp425-pci.o
  27
  28  obj-y  += common.o
  29
  30 @@ -32,6 +33,7 @@
  31  obj-$(CONFIG_MACH_WG302V2)     += wg302v2-setup.o
  32  obj-$(CONFIG_MACH_FSG)         += fsg-setup.o
  33  obj-$(CONFIG_MACH_PRONGHORNMETRO)      += pronghornmetro-setup.o
  34 +obj-$(CONFIG_MACH_COMPEX)      += compex-setup.o
  35
  36  obj-$(CONFIG_PCI)              += $(obj-pci-$(CONFIG_PCI)) common-pci.o
  37  obj-$(CONFIG_IXP4XX_QMGR)      += ixp4xx_qmgr.o
  38 diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c
  39 --- linux-2.6.23/arch/arm/mach-ixp4xx/compex-setup.c    1970-01-01 01:00:00.000000000 +0100
  40 +++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/compex-setup.c       2007-10-23 18:22:41.000000000 +0200
  41 @@ -0,0 +1,120 @@
  42 +/*
  43 + * arch/arm/mach-ixp4xx/compex-setup.c
  44 + *
  45 + * Ccompex WP18 / NP18A board-setup
  46 + *
  47 + * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
  48 + *
  49 + * based on ixdp425-setup.c:
  50 + *     Copyright (C) 2003-2005 MontaVista Software, Inc.
  51 + *
  52 + * Author: Imre Kaloz <Kaloz@openwrt.org>
  53 + */
  54 +
  55 +#include <linux/kernel.h>
  56 +#include <linux/init.h>
  57 +#include <linux/device.h>
  58 +#include <linux/serial.h>
  59 +#include <linux/tty.h>
  60 +#include <linux/serial_8250.h>
  61 +#include <linux/slab.h>
  62 +
  63 +#include <asm/types.h>
  64 +#include <asm/setup.h>
  65 +#include <asm/memory.h>
  66 +#include <asm/hardware.h>
  67 +#include <asm/mach-types.h>
  68 +#include <asm/irq.h>
  69 +#include <asm/mach/arch.h>
  70 +#include <asm/mach/flash.h>
  71 +
  72 +static struct flash_platform_data compex_flash_data = {
  73 +       .map_name       = "cfi_probe",
  74 +       .width          = 2,
  75 +};
  76 +
  77 +static struct resource compex_flash_resource = {
  78 +       .flags          = IORESOURCE_MEM,
  79 +};
  80 +
  81 +static struct platform_device compex_flash = {
  82 +       .name           = "IXP4XX-Flash",
  83 +       .id             = 0,
  84 +       .dev            = {
  85 +               .platform_data = &compex_flash_data,
  86 +       },
  87 +       .num_resources  = 1,
  88 +       .resource       = &compex_flash_resource,
  89 +};
  90 +
  91 +static struct resource compex_uart_resources[] = {
  92 +       {
  93 +               .start          = IXP4XX_UART1_BASE_PHYS,
  94 +               .end            = IXP4XX_UART1_BASE_PHYS + 0x0fff,
  95 +               .flags          = IORESOURCE_MEM
  96 +       },
  97 +       {
  98 +               .start          = IXP4XX_UART2_BASE_PHYS,
  99 +               .end            = IXP4XX_UART2_BASE_PHYS + 0x0fff,
 100 +               .flags          = IORESOURCE_MEM
 101 +       }
 102 +};
 103 +
 104 +static struct plat_serial8250_port compex_uart_data[] = {
 105 +       {
 106 +               .mapbase        = IXP4XX_UART1_BASE_PHYS,
 107 +               .membase        = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
 108 +               .irq            = IRQ_IXP4XX_UART1,
 109 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 110 +               .iotype         = UPIO_MEM,
 111 +               .regshift       = 2,
 112 +               .uartclk        = IXP4XX_UART_XTAL,
 113 +       },
 114 +       {
 115 +               .mapbase        = IXP4XX_UART2_BASE_PHYS,
 116 +               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 117 +               .irq            = IRQ_IXP4XX_UART2,
 118 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 119 +               .iotype         = UPIO_MEM,
 120 +               .regshift       = 2,
 121 +               .uartclk        = IXP4XX_UART_XTAL,
 122 +       },
 123 +       { },
 124 +};
 125 +
 126 +static struct platform_device compex_uart = {
 127 +       .name                   = "serial8250",
 128 +       .id                     = PLAT8250_DEV_PLATFORM,
 129 +       .dev.platform_data      = compex_uart_data,
 130 +       .num_resources          = 2,
 131 +       .resource               = compex_uart_resources,
 132 +};
 133 +
 134 +static struct platform_device *compex_devices[] __initdata = {
 135 +       &compex_flash,
 136 +       &compex_uart
 137 +};
 138 +
 139 +static void __init compex_init(void)
 140 +{
 141 +       ixp4xx_sys_init();
 142 +
 143 +       compex_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 144 +       compex_flash_resource.end =
 145 +               IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 146 +
 147 +       platform_add_devices(compex_devices, ARRAY_SIZE(compex_devices));
 148 +}
 149 +
 150 +#ifdef CONFIG_MACH_COMPEX
 151 +MACHINE_START(COMPEX, "Compex WP18 / NP18A")
 152 +       /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
 153 +       .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
 154 +       .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 155 +       .map_io         = ixp4xx_map_io,
 156 +       .init_irq       = ixp4xx_init_irq,
 157 +       .timer          = &ixp4xx_timer,
 158 +       .boot_params    = 0x0100,
 159 +       .init_machine   = compex_init,
 160 +MACHINE_END
 161 +#endif
 162 diff -Nur linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c
 163 --- linux-2.6.23/arch/arm/mach-ixp4xx/ixdp425-pci.c     2007-10-09 22:31:38.000000000 +0200
 164 +++ linux-2.6.23-owrt/arch/arm/mach-ixp4xx/ixdp425-pci.c        2007-10-23 18:22:41.000000000 +0200
 165 @@ -66,7 +66,7 @@
 166  int __init ixdp425_pci_init(void)
 167  {
 168         if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
 169 -                       machine_is_ixdp465() || machine_is_kixrp435())
 170 +                       machine_is_ixdp465() || machine_is_kixrp435() || machine_is_compex())
 171                 pci_common_init(&ixdp425_pci);
 172         return 0;
 173  }
 174 diff -Nur linux-2.6.23/arch/arm/tools/mach-types linux-2.6.23-owrt/arch/arm/tools/mach-types
 175 --- linux-2.6.23/arch/arm/tools/mach-types      2007-10-09 22:31:38.000000000 +0200
 176 +++ linux-2.6.23-owrt/arch/arm/tools/mach-types 2007-10-23 18:22:41.000000000 +0200
 177 @@ -1278,7 +1278,7 @@
 178  smdk6400               MACH_SMDK6400           SMDK6400                1270
 179  nokia_n800             MACH_NOKIA_N800         NOKIA_N800              1271
 180  greenphone             MACH_GREENPHONE         GREENPHONE              1272
 181 -compex42x              MACH_COMPEXWP18         COMPEXWP18              1273
 182 +compex                 MACH_COMPEX             COMPEX                  1273
 183  xmate                  MACH_XMATE              XMATE                   1274
 184  energizer              MACH_ENERGIZER          ENERGIZER               1275
 185  ime1                   MACH_IME1               IME1                    1276