docs/hardware/linksys/wrt54g_v20/dmesg-2_4_29.txt

   1 PU revision is: 00029007
   2 Primary instruction cache 8kB, physically tagged, 2-way, linesize 16 bytes.
   3 Primary data cache 4kB, 2-way, linesize 16 bytes.
   4 Linux version 2.4.29 (kaloz@arrakis) (gcc version 3.3.5) #1 Fri Mar 25 12:39:57 CET 2005
   5 Determined physical RAM map:
   6  memory: 02000000 @ 00000000 (usable)
   7 On node 0 totalpages: 8192
   8 zone(0): 8192 pages.
   9 zone(1): 0 pages.
  10 zone(2): 0 pages.
  11 Kernel command line: root=/dev/mtdblock2 init=/etc/preinit noinitrd console=ttyS0,115200
  12 CPU: BCM4712 rev 1 at 200 MHz
  13 Using 100.000 MHz high precision timer.
  14 Calibrating delay loop... 199.47 BogoMIPS
  15 Memory: 30304k/32768k available (1463k kernel code, 2464k reserved, 104k data, 88k init, 0k highmem)
  16 Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
  17 Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
  18 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
  19 Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
  20 Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
  21 Checking for 'wait' instruction...  unavailable.
  22 POSIX conformance testing by UNIFIX
  23 PCI: Disabled
  24 PCI: Fixing up bus 0
  25 Linux NET4.0 for Linux 2.4
  26 Based upon Swansea University Computer Society NET3.039
  27 Initializing RT netlink socket
  28 Starting kswapd
  29 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
  30 devfs: boot_options: 0x1
  31 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
  32 Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
  33 pty: 256 Unix98 ptys configured
  34 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
  35 ttyS00 at 0xb8000300 (irq = 3) is a 16550A
  36 ttyS01 at 0xb8000400 (irq = 0) is a 16550A
  37 Software Watchdog Timer: 0.05, timer margin: 60 sec
  38 loop: loaded (max 8 devices)
  39 Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
  40 Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
  41 Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
  42 Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
  43 Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
  44 Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
  45 Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
  46 cfi_cmdset_0001: Erase suspend on write enabled
  47 0: offset=0x0,size=0x2000,blocks=8
  48 1: offset=0x10000,size=0x10000,blocks=63
  49 Using word write method
  50 Flash device: 0x400000 at 0x1c000000
  51 Creating 4 MTD partitions on "Physically mapped flash":
  52 0x00000000-0x00040000 : "pmon"
  53 0x00040000-0x003f0000 : "linux"
  54 0x000f0000-0x003f0000 : "rootfs"
  55 0x003f0000-0x00400000 : "nvram"
  56 sflash: found no supported devices
  57 Initializing Cryptographic API
  58 NET4: Linux TCP/IP 1.0 for NET4.0
  59 IP Protocols: ICMP, UDP, TCP, IGMP
  60 IP: routing cache hash table of 512 buckets, 4Kbytes
  61 TCP: Hash tables configured (established 2048 bind 4096)
  62 ip_conntrack version 2.1 (256 buckets, 2048 max) - 288 bytes per conntrack
  63 ip_tables: (C) 2000-2002 Netfilter core team
  64 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  65 NET4: Ethernet Bridge 008 for NET4.0
  66 Bridge firewalling registered
  67 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  68 All bugs added by David S. Miller <davem@redhat.com>
  69 VFS: Mounted root (jffs2 filesystem) readonly.
  70 Mounted devfs on /dev
  71 Freeing unused kernel memory: 88k freed
  72 Algorithmics/MIPS FPU Emulator v1.5
  73 diag boardtype: 00000101
  74 using v2 hardware
  75 jffs2.bbc: SIZE compression mode activated.
  76 PCI: Setting latency timer of device 00:02.0 to 64
  77 5325E   phy=FFFFFFFF
  78 5325E   VLAN programming for BCM5325E-MDIO I/F switch
  79 eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.60.13.0
  80 PCI: Setting latency timer of device 00:01.0 to 64
  81 eth1: Broadcom BCM4320 802.11 Wireless Controller 3.60.13.0
  82 device eth0 entered promiscuous mode
  83 vlan0: add 01:00:5e:00:00:01 mcast address to master interface
  84 device eth1 entered promiscuous mode
  85 br0: port 2(eth1) entering learning state
  86 br0: port 1(vlan0) entering learning state
  87 br0: port 2(eth1) entering forwarding state
  88 br0: topology change detected, propagating
  89 br0: port 1(vlan0) entering forwarding state
  90 br0: topology change detected, propagating
  91 vlan1: Setting MAC address to  00 0a 48 06 82 50.
  92 vlan1: add 01:00:5e:00:00:01 mcast address to master interface
  93 device br0 entered promiscuous mode
  94 device br0 left promiscuous mode
  95 device br0 entered promiscuous mode
  96 device br0 left promiscuous mode
  97