target/linux/mpc83xx/patches-2.6.33/002-boot_dts_rb600.patch

   1 --- /dev/null
   2 +++ b/arch/powerpc/boot/dts/rb600.dts
   3 @@ -0,0 +1,242 @@
   4 +/*
   5 + * RouterBOARD 600 series Device Tree Source
   6 + *
   7 + * Copyright 2009 Michael Guntsche <mike@it-loops.com>
   8 + *
   9 + * This program is free software; you can redistribute  it and/or modify it
  10 + * under  the terms of  the GNU General  Public License as published by the
  11 + * Free Software Foundation;  either version 2 of the  License, or (at your
  12 + * option) any later version.
  13 + */
  14 +
  15 +/dts-v1/;
  16 +
  17 +/ {
  18 +       model = "RB600";
  19 +       compatible = "MPC83xx";
  20 +       #address-cells = <1>;
  21 +       #size-cells = <1>;
  22 +
  23 +       aliases {
  24 +               ethernet0 = &enet0;
  25 +               ethernet1 = &enet1;
  26 +       };
  27 +
  28 +       chosen {
  29 +               linux,stdout-path = "/soc8343@e0000000/serial@4500";
  30 +       };
  31 +
  32 +       cpus {
  33 +               #address-cells = <1>;
  34 +               #size-cells = <0>;
  35 +
  36 +               PowerPC,8343E@0 {
  37 +                       device_type = "cpu";
  38 +                       reg = <0x0>;
  39 +                       d-cache-line-size = <0x20>;
  40 +                       i-cache-line-size = <0x20>;
  41 +                       d-cache-size = <0x8000>;
  42 +                       i-cache-size = <0x8000>;
  43 +                       timebase-frequency = <0x0000000>; // filled by the bootwrapper from the firmware blob
  44 +                       clock-frequency = <0x00000000>; // filled by the bootwrapper from the firmware blob
  45 +               };
  46 +       };
  47 +
  48 +       memory {
  49 +               device_type = "memory";
  50 +               reg = <0x0 0x0000000>; // filled by the bootwrapper from the firmware blob
  51 +       };
  52 +
  53 +       cf@f9200000 {
  54 +               lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
  55 +               interrupt-at-level = <0x0>;
  56 +               interrupt-parent = <&ipic>;
  57 +               interrupts = <0x16 0x8>;
  58 +               lbc_extra_divider = <0x1>;
  59 +               reg = <0xf9200000 0x200000>;
  60 +               device_type = "rb,cf";
  61 +       };
  62 +
  63 +       cf@f9000000 {
  64 +               lb-timings = <0x5dc 0x3e8 0x1194 0x5dc 0x2af8>;
  65 +               interrupt-at-level = <0x0>;
  66 +               interrupt-parent = <&ipic>;
  67 +               interrupts = <0x14 0x8>;
  68 +               lbc_extra_divider = <0x1>;
  69 +               reg = <0xf9000000 0x200000>;
  70 +               device_type = "rb,cf";
  71 +       };
  72 +
  73 +       flash {
  74 +               reg = <0xff800000 0x20000>;
  75 +       };
  76 +
  77 +       nnand {
  78 +               reg = <0xf0000000 0x1000>;
  79 +       };
  80 +
  81 +       nand {
  82 +               ale = <&gpio 0x6>;
  83 +               cle = <&gpio 0x5>;
  84 +               nce = <&gpio 0x4>;
  85 +               rdy = <&gpio 0x3>;
  86 +               reg = <0xf8000000 0x1000>;
  87 +               device_type = "rb,nand";
  88 +       };
  89 +
  90 +       fancon {
  91 +               interrupt-parent = <&ipic>;
  92 +               interrupts = <0x17 0x8>;
  93 +               sense = <&gpio 0x7>;
  94 +               fan_on = <&gpio 0x9>;
  95 +       };
  96 +
  97 +       pci0: pci@e0008500 {
  98 +               device_type = "pci";
  99 +               compatible = "fsl,mpc8349-pci";
 100 +               reg = <0xe0008500 0x100 0xe0008300 0x8>;
 101 +               #address-cells = <3>;
 102 +               #size-cells = <2>;
 103 +               #interrupt-cells = <1>;
 104 +               ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x1000000 0x0 0x0 0xd0000000 0x0 0x4000000>;
 105 +               bus-range = <0x0 0x0>;
 106 +               interrupt-map = <
 107 +                       0x5800 0x0 0x0 0x1 &ipic 0x15 0x8
 108 +                       0x6000 0x0 0x0 0x1 &ipic 0x30 0x8
 109 +                       0x6000 0x0 0x0 0x2 &ipic 0x11 0x8
 110 +                       0x6800 0x0 0x0 0x1 &ipic 0x11 0x8
 111 +                       0x6800 0x0 0x0 0x2 &ipic 0x12 0x8
 112 +                       0x7000 0x0 0x0 0x1 &ipic 0x12 0x8
 113 +                       0x7000 0x0 0x0 0x2 &ipic 0x13 0x8
 114 +                       0x7800 0x0 0x0 0x1 &ipic 0x13 0x8
 115 +                       0x7800 0x0 0x0 0x2 &ipic 0x30 0x8
 116 +                       0x8000 0x0 0x0 0x1 &ipic 0x30 0x8
 117 +                       0x8000 0x0 0x0 0x2 &ipic 0x12 0x8
 118 +                       0x8000 0x0 0x0 0x3 &ipic 0x11 0x8
 119 +                       0x8000 0x0 0x0 0x4 &ipic 0x13 0x8
 120 +                       0xa000 0x0 0x0 0x1 &ipic 0x30 0x8
 121 +                       0xa000 0x0 0x0 0x2 &ipic 0x11 0x8
 122 +                       0xa000 0x0 0x0 0x3 &ipic 0x12 0x8
 123 +                       0xa000 0x0 0x0 0x4 &ipic 0x13 0x8
 124 +                       0xa800 0x0 0x0 0x1 &ipic 0x11 0x8
 125 +                       0xa800 0x0 0x0 0x2 &ipic 0x12 0x8
 126 +                       0xa800 0x0 0x0 0x3 &ipic 0x13 0x8
 127 +                       0xa800 0x0 0x0 0x4 &ipic 0x30 0x8>;
 128 +               interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
 129 +               interrupt-parent = <&ipic>;
 130 +       };
 131 +
 132 +       soc8343@e0000000 {
 133 +               #address-cells = <1>;
 134 +               #size-cells = <1>;
 135 +               device_type = "soc";
 136 +               compatible = "simple-bus";
 137 +               ranges = <0x0 0xe0000000 0x100000>;
 138 +               reg = <0xe0000000 0x200>;
 139 +               bus-frequency = <0x1>;
 140 +
 141 +               led {
 142 +                       user_led = <0x400 0x8>;
 143 +               };
 144 +
 145 +               beeper {
 146 +                       reg = <0x500 0x100>;
 147 +               };
 148 +
 149 +               gpio: gpio@0 {
 150 +                       reg = <0xc08 0x4>;
 151 +                       device-id = <0x0>;
 152 +                       compatible = "gpio";
 153 +                       device_type = "gpio";
 154 +               };
 155 +
 156 +               enet0: ethernet@25000 {
 157 +                       #address-cells = <1>;
 158 +                       #size-cells = <1>;
 159 +                       cell-index = <0>;
 160 +                       phy-handle = <&phy0>;
 161 +                       tbi-handle = <&tbi0>;
 162 +                       interrupt-parent = <&ipic>;
 163 +                       interrupts = <0x23 0x8 0x24 0x8 0x25 0x8>;
 164 +                       local-mac-address = [00 00 00 00 00 00];
 165 +                       reg = <0x25000 0x1000>;
 166 +                       ranges = <0x0 0x25000 0x1000>;
 167 +                       compatible = "gianfar";
 168 +                       model = "TSEC";
 169 +                       device_type = "network";
 170 +
 171 +                       mdio@520 {
 172 +                               #address-cells = <1>;
 173 +                               #size-cells = <0>;
 174 +                               compatible = "fsl,gianfar-tbi";
 175 +                               reg = <0x520 0x20>;
 176 +
 177 +                               tbi0: tbi-phy@11 {
 178 +                                       reg = <0x11>;
 179 +                                       device_type = "tbi-phy";
 180 +                               };
 181 +                       };
 182 +               };
 183 +
 184 +               enet1: ethernet@24000 {
 185 +                       #address-cells = <1>;
 186 +                       #size-cells = <1>;
 187 +                       cell-index = <1>;
 188 +                       phy-handle = <&phy1>;
 189 +                       tbi-handle = <&tbi1>;
 190 +                       interrupt-parent = <&ipic>;
 191 +                       interrupts = <0x20 0x8 0x21 0x8 0x22 0x8>;
 192 +                       local-mac-address = [00 00 00 00 00 00];
 193 +                       reg = <0x24000 0x1000>;
 194 +                       ranges = <0x0 0x24000 0x1000>;
 195 +                       compatible = "gianfar";
 196 +                       model = "TSEC";
 197 +                       device_type = "network";
 198 +
 199 +                       mdio@520 {
 200 +                               #size-cells = <0x0>;
 201 +                               #address-cells = <0x1>;
 202 +                               reg = <0x520 0x20>;
 203 +                               compatible = "fsl,gianfar-mdio";
 204 +
 205 +                               phy0: ethernet-phy@0 {
 206 +                                       device_type = "ethernet-phy";
 207 +                                       reg = <0x0>;
 208 +                               };
 209 +
 210 +                               phy1: ethernet-phy@1 {
 211 +                                       device_type = "ethernet-phy";
 212 +                                       reg = <0x1>;
 213 +                               };
 214 +
 215 +                               tbi1: tbi-phy@11 {
 216 +                                       reg = <0x11>;
 217 +                                       device_type = "tbi-phy";
 218 +                               };
 219 +                       };
 220 +               };
 221 +
 222 +               ipic: pic@700 {
 223 +                       interrupt-controller;
 224 +                       #address-cells = <0>;
 225 +                       #interrupt-cells = <2>;
 226 +                       reg = <0x700 0x100>;
 227 +                       device_type = "ipic";
 228 +               };
 229 +
 230 +               serial@4500 {
 231 +                       interrupt-parent = <&ipic>;
 232 +                       interrupts = <0x9 0x8>;
 233 +                       clock-frequency = <0xfe4f840>;
 234 +                       reg = <0x4500 0x100>;
 235 +                       compatible = "ns16550";
 236 +                       device_type = "serial";
 237 +               };
 238 +
 239 +               wdt@200 {
 240 +                       reg = <0x200 0x100>;
 241 +                       compatible = "mpc83xx_wdt";
 242 +                       device_type = "watchdog";
 243 +               };
 244 +       };
 245 +};