target/linux/etrax/files-2.6.30/drivers/usb/host/hc-crisv10.h

   1 #ifndef __LINUX_ETRAX_USB_H
   2 #define __LINUX_ETRAX_USB_H
   3
   4 #include <linux/types.h>
   5 #include <linux/list.h>
   6
   7 struct USB_IN_Desc {
   8   volatile __u16 sw_len;
   9   volatile __u16 command;
  10   volatile unsigned long next;
  11   volatile unsigned long buf;
  12   volatile __u16 hw_len;
  13   volatile __u16 status;
  14 };
  15
  16 struct USB_SB_Desc {
  17   volatile __u16 sw_len;
  18   volatile __u16 command;
  19   volatile unsigned long next;
  20   volatile unsigned long buf;
  21 };
  22
  23 struct USB_EP_Desc {
  24   volatile __u16 hw_len;
  25   volatile __u16 command;
  26   volatile unsigned long sub;
  27   volatile unsigned long next;
  28 };
  29
  30
  31 /* Root Hub port status struct */
  32 struct crisv10_rh {
  33   volatile __u16 wPortChange[2];
  34   volatile __u16 wPortStatusPrev[2];
  35 };
  36
  37 /* HCD description */
  38 struct crisv10_hcd {
  39   spinlock_t            lock;
  40   __u8                  num_ports;
  41   __u8                  running;
  42 };
  43
  44
  45 /* Endpoint HC private data description */
  46 struct crisv10_ep_priv {
  47   int epid;
  48 };
  49
  50 /* Additional software state info for a USB Controller epid */
  51 struct etrax_epid {
  52   __u8 inuse;       /* !0 = setup in Etrax and used for a endpoint */
  53   __u8 disabled;    /* !0 = Temporarly disabled to avoid resubmission */
  54   __u8 type;        /* Setup as: PIPE_BULK, PIPE_CONTROL ... */
  55   __u8 out_traffic; /* !0 = This epid is for out traffic */
  56 };
  57
  58 /* Struct to hold information of scheduled later URB completion */
  59 struct urb_later_data {
  60   struct delayed_work dws;
  61   struct usb_hcd *hcd;
  62   struct urb *urb;
  63   int urb_num;
  64   int status;
  65 };
  66
  67
  68 typedef enum {
  69   STARTED,
  70   NOT_STARTED,
  71   UNLINK,
  72 } crisv10_urb_state_t;
  73
  74
  75 struct crisv10_urb_priv {
  76   /* Sequence number for this URB. Every new submited URB gets this from
  77      a incrementing counter. Used when a URB is scheduled for later finish to
  78      be sure that the intended URB hasn't already been completed (device
  79      drivers has a tendency to reuse URBs once they are completed, causing us
  80      to not be able to single old ones out only based on the URB pointer.) */
  81   __u32 urb_num;
  82
  83   /* The first_sb field is used for freeing all SB descriptors belonging
  84      to an urb. The corresponding ep descriptor's sub pointer cannot be
  85      used for this since the DMA advances the sub pointer as it processes
  86      the sb list. */
  87   struct USB_SB_Desc *first_sb;
  88
  89   /* The last_sb field referes to the last SB descriptor that belongs to
  90      this urb. This is important to know so we can free the SB descriptors
  91      that ranges between first_sb and last_sb. */
  92   struct USB_SB_Desc *last_sb;
  93
  94   /* The rx_offset field is used in ctrl and bulk traffic to keep track
  95      of the offset in the urb's transfer_buffer where incoming data should be
  96      copied to. */
  97   __u32 rx_offset;
  98
  99   /* Counter used in isochronous transfers to keep track of the
 100      number of packets received/transmitted.  */
 101   __u32 isoc_packet_counter;
 102
 103   /* Flag that marks if this Isoc Out URB has finished it's transfer. Used
 104      because several URBs can be finished before list is processed */
 105   __u8  isoc_out_done;
 106
 107   /* This field is used to pass information about the urb's current state
 108      between the various interrupt handlers (thus marked volatile). */
 109   volatile crisv10_urb_state_t urb_state;
 110
 111   /* In Ctrl transfers consist of (at least) 3 packets: SETUP, IN and ZOUT.
 112      When DMA8 sub-channel 2 has processed the SB list for this sequence we
 113      get a interrupt. We also get a interrupt for In transfers and which
 114      one of these interrupts that comes first depends of data size and device.
 115      To be sure that we have got both interrupts before we complete the URB
 116      we have these to flags that shows which part that has completed.
 117      We can then check when we get one of the interrupts that if the other has
 118      occured it's safe for us to complete the URB, otherwise we set appropriate
 119      flag and do the completion when we get the other interrupt. */
 120   volatile unsigned char ctrl_zout_done;
 121   volatile unsigned char ctrl_rx_done;
 122
 123   /* Connection between the submitted urb and ETRAX epid number */
 124   __u8 epid;
 125
 126   /* The rx_data_list field is used for periodic traffic, to hold
 127      received data for later processing in the the complete_urb functions,
 128      where the data us copied to the urb's transfer_buffer. Basically, we
 129      use this intermediate storage because we don't know when it's safe to
 130      reuse the transfer_buffer (FIXME?). */
 131   struct list_head rx_data_list;
 132
 133
 134   /* The interval time rounded up to closest 2^N */
 135   int interval;
 136
 137   /* Pool of EP descriptors needed if it's a INTR transfer.
 138      Amount of EPs in pool correspons to how many INTR that should
 139      be inserted in TxIntrEPList (max 128, defined by MAX_INTR_INTERVAL) */
 140   struct USB_EP_Desc* intr_ep_pool[128];
 141
 142   /* The mount of EPs allocated for this INTR URB */
 143   int intr_ep_pool_length;
 144
 145   /* Pointer to info struct if URB is scheduled to be finished later */
 146   struct urb_later_data* later_data;
 147
 148   /* Allocated bandwidth for isochronous and interrupt traffic */
 149   int bandwidth;
 150 };
 151
 152
 153 /* This struct is for passing data from the top half to the bottom half irq
 154    handlers */
 155 struct crisv10_irq_reg {
 156   struct usb_hcd* hcd;
 157   __u32 r_usb_epid_attn;
 158   __u8 r_usb_status;
 159   __u16 r_usb_rh_port_status_1;
 160   __u16 r_usb_rh_port_status_2;
 161   __u32 r_usb_irq_mask_read;
 162   __u32 r_usb_fm_number;
 163   struct work_struct usb_bh;
 164 };
 165
 166
 167 /* This struct is for passing data from the isoc top half to the isoc bottom
 168    half. */
 169 struct crisv10_isoc_complete_data {
 170   struct usb_hcd *hcd;
 171   struct urb *urb;
 172   struct work_struct usb_bh;
 173 };
 174
 175 /* Entry item for URB lists for each endpint */
 176 typedef struct urb_entry
 177 {
 178         struct urb *urb;
 179         struct list_head list;
 180 } urb_entry_t;
 181
 182 /* ---------------------------------------------------------------------------
 183    Virtual Root HUB
 184    ------------------------------------------------------------------------- */
 185 /* destination of request */
 186 #define RH_INTERFACE               0x01
 187 #define RH_ENDPOINT                0x02
 188 #define RH_OTHER                   0x03
 189
 190 #define RH_CLASS                   0x20
 191 #define RH_VENDOR                  0x40
 192
 193 /* Requests: bRequest << 8 | bmRequestType */
 194 #define RH_GET_STATUS           0x0080
 195 #define RH_CLEAR_FEATURE        0x0100
 196 #define RH_SET_FEATURE          0x0300
 197 #define RH_SET_ADDRESS          0x0500
 198 #define RH_GET_DESCRIPTOR       0x0680
 199 #define RH_SET_DESCRIPTOR       0x0700
 200 #define RH_GET_CONFIGURATION    0x0880
 201 #define RH_SET_CONFIGURATION    0x0900
 202 #define RH_GET_STATE            0x0280
 203 #define RH_GET_INTERFACE        0x0A80
 204 #define RH_SET_INTERFACE        0x0B00
 205 #define RH_SYNC_FRAME           0x0C80
 206 /* Our Vendor Specific Request */
 207 #define RH_SET_EP               0x2000
 208
 209
 210 /* Hub port features */
 211 #define RH_PORT_CONNECTION         0x00
 212 #define RH_PORT_ENABLE             0x01
 213 #define RH_PORT_SUSPEND            0x02
 214 #define RH_PORT_OVER_CURRENT       0x03
 215 #define RH_PORT_RESET              0x04
 216 #define RH_PORT_POWER              0x08
 217 #define RH_PORT_LOW_SPEED          0x09
 218 #define RH_C_PORT_CONNECTION       0x10
 219 #define RH_C_PORT_ENABLE           0x11
 220 #define RH_C_PORT_SUSPEND          0x12
 221 #define RH_C_PORT_OVER_CURRENT     0x13
 222 #define RH_C_PORT_RESET            0x14
 223
 224 /* Hub features */
 225 #define RH_C_HUB_LOCAL_POWER       0x00
 226 #define RH_C_HUB_OVER_CURRENT      0x01
 227
 228 #define RH_DEVICE_REMOTE_WAKEUP    0x00
 229 #define RH_ENDPOINT_STALL          0x01
 230
 231 /* Our Vendor Specific feature */
 232 #define RH_REMOVE_EP               0x00
 233
 234
 235 #define RH_ACK                     0x01
 236 #define RH_REQ_ERR                 -1
 237 #define RH_NACK                    0x00
 238
 239 /* Field definitions for */
 240
 241 #define USB_IN_command__eol__BITNR      0 /* command macros */
 242 #define USB_IN_command__eol__WIDTH      1
 243 #define USB_IN_command__eol__no         0
 244 #define USB_IN_command__eol__yes        1
 245
 246 #define USB_IN_command__intr__BITNR     3
 247 #define USB_IN_command__intr__WIDTH     1
 248 #define USB_IN_command__intr__no        0
 249 #define USB_IN_command__intr__yes       1
 250
 251 #define USB_IN_status__eop__BITNR       1 /* status macros. */
 252 #define USB_IN_status__eop__WIDTH       1
 253 #define USB_IN_status__eop__no          0
 254 #define USB_IN_status__eop__yes         1
 255
 256 #define USB_IN_status__eot__BITNR       5
 257 #define USB_IN_status__eot__WIDTH       1
 258 #define USB_IN_status__eot__no          0
 259 #define USB_IN_status__eot__yes         1
 260
 261 #define USB_IN_status__error__BITNR     6
 262 #define USB_IN_status__error__WIDTH     1
 263 #define USB_IN_status__error__no        0
 264 #define USB_IN_status__error__yes       1
 265
 266 #define USB_IN_status__nodata__BITNR    7
 267 #define USB_IN_status__nodata__WIDTH    1
 268 #define USB_IN_status__nodata__no       0
 269 #define USB_IN_status__nodata__yes      1
 270
 271 #define USB_IN_status__epid__BITNR      8
 272 #define USB_IN_status__epid__WIDTH      5
 273
 274 #define USB_EP_command__eol__BITNR      0
 275 #define USB_EP_command__eol__WIDTH      1
 276 #define USB_EP_command__eol__no         0
 277 #define USB_EP_command__eol__yes        1
 278
 279 #define USB_EP_command__eof__BITNR      1
 280 #define USB_EP_command__eof__WIDTH      1
 281 #define USB_EP_command__eof__no         0
 282 #define USB_EP_command__eof__yes        1
 283
 284 #define USB_EP_command__intr__BITNR     3
 285 #define USB_EP_command__intr__WIDTH     1
 286 #define USB_EP_command__intr__no        0
 287 #define USB_EP_command__intr__yes       1
 288
 289 #define USB_EP_command__enable__BITNR   4
 290 #define USB_EP_command__enable__WIDTH   1
 291 #define USB_EP_command__enable__no      0
 292 #define USB_EP_command__enable__yes     1
 293
 294 #define USB_EP_command__hw_valid__BITNR 5
 295 #define USB_EP_command__hw_valid__WIDTH 1
 296 #define USB_EP_command__hw_valid__no    0
 297 #define USB_EP_command__hw_valid__yes   1
 298
 299 #define USB_EP_command__epid__BITNR     8
 300 #define USB_EP_command__epid__WIDTH     5
 301
 302 #define USB_SB_command__eol__BITNR      0 /* command macros. */
 303 #define USB_SB_command__eol__WIDTH      1
 304 #define USB_SB_command__eol__no         0
 305 #define USB_SB_command__eol__yes        1
 306
 307 #define USB_SB_command__eot__BITNR      1
 308 #define USB_SB_command__eot__WIDTH      1
 309 #define USB_SB_command__eot__no         0
 310 #define USB_SB_command__eot__yes        1
 311
 312 #define USB_SB_command__intr__BITNR     3
 313 #define USB_SB_command__intr__WIDTH     1
 314 #define USB_SB_command__intr__no        0
 315 #define USB_SB_command__intr__yes       1
 316
 317 #define USB_SB_command__tt__BITNR       4
 318 #define USB_SB_command__tt__WIDTH       2
 319 #define USB_SB_command__tt__zout        0
 320 #define USB_SB_command__tt__in          1
 321 #define USB_SB_command__tt__out         2
 322 #define USB_SB_command__tt__setup       3
 323
 324
 325 #define USB_SB_command__rem__BITNR      8
 326 #define USB_SB_command__rem__WIDTH      6
 327
 328 #define USB_SB_command__full__BITNR     6
 329 #define USB_SB_command__full__WIDTH     1
 330 #define USB_SB_command__full__no        0
 331 #define USB_SB_command__full__yes       1
 332
 333 #endif
 334