target/linux/generic/patches-3.0/051-linux_atm-chas.patch

   1
   2
   3 From: Pascal Hambourg <pascal@plouf.fr.eu.org>
   4 Date: Wed, 17 Aug 2011 08:37:18 +0200
   5 Subject: [PATCH 1/2] atm: br2684: Make headroom and hard_header_len depend on the payload type
   6
   7 Routed payload requires less headroom than bridged payload.
   8 So do not reallocate headroom if not needed.
   9 Also, add worst case AAL5 overhead to netdev->hard_header_len.
  10
  11 Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
  12 Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
  13 ---
  14  net/atm/br2684.c |    8 ++++++--
  15  1 files changed, 6 insertions(+), 2 deletions(-)
  16
  17 diff --git a/net/atm/br2684.c b/net/atm/br2684.c
  18 index 53b0aa1..ed72263 100644
  19 --- a/net/atm/br2684.c
  20 +++ b/net/atm/br2684.c
  21 @@ -202,7 +202,10 @@ static int br2684_xmit_vcc(struct sk_buff *skb, struct net_device *dev,
  22  {
  23         struct br2684_dev *brdev = BRPRIV(dev);
  24         struct atm_vcc *atmvcc;
  25 -       int minheadroom = (brvcc->encaps == e_llc) ? 10 : 2;
  26 +       int minheadroom = (brvcc->encaps == e_llc) ?
  27 +               ((brdev->payload == p_bridged) ?
  28 +                       sizeof(llc_oui_pid_pad) : sizeof(llc_oui_ipv4)) :
  29 +               ((brdev->payload == p_bridged) ? BR2684_PAD_LEN : 0);
  30
  31         if (skb_headroom(skb) < minheadroom) {
  32                 struct sk_buff *skb2 = skb_realloc_headroom(skb, minheadroom);
  33 @@ -583,6 +586,7 @@ static void br2684_setup(struct net_device *netdev)
  34         struct br2684_dev *brdev = BRPRIV(netdev);
  35
  36         ether_setup(netdev);
  37 +       netdev->hard_header_len += sizeof(llc_oui_pid_pad); /* worst case */
  38         brdev->net_dev = netdev;
  39
  40         netdev->netdev_ops = &br2684_netdev_ops;
  41 @@ -595,7 +599,7 @@ static void br2684_setup_routed(struct net_device *netdev)
  42         struct br2684_dev *brdev = BRPRIV(netdev);
  43
  44         brdev->net_dev = netdev;
  45 -       netdev->hard_header_len = 0;
  46 +       netdev->hard_header_len = sizeof(llc_oui_ipv4); /* worst case */
  47         netdev->netdev_ops = &br2684_netdev_ops_routed;
  48         netdev->addr_len = 0;
  49         netdev->mtu = 1500;
  50
  51 From: Pascal Hambourg <pascal@plouf.fr.eu.org>
  52 Date: Wed, 17 Aug 2011 08:37:52 +0200
  53 Subject: [PATCH 2/2] atm: br2684: Avoid alignment issues
  54
  55 Use memcmp() instead of cast to u16 when checking the PAD field.
  56
  57 Signed-off-by: Pascal Hambourg <pascal@plouf.fr.eu.org>
  58 Signed-off-by: chas williams - CONTRACTOR <chas@cmf.nrl.navy.mil>
  59 ---
  60  net/atm/br2684.c |    3 ++-
  61  1 files changed, 2 insertions(+), 1 deletions(-)
  62
  63 diff --git a/net/atm/br2684.c b/net/atm/br2684.c
  64 index ed72263..353fccf 100644
  65 --- a/net/atm/br2684.c
  66 +++ b/net/atm/br2684.c
  67 @@ -53,6 +53,7 @@ static const unsigned char ethertype_ipv4[] = { ETHERTYPE_IPV4 };
  68  static const unsigned char ethertype_ipv6[] = { ETHERTYPE_IPV6 };
  69  static const unsigned char llc_oui_pid_pad[] =
  70                         { LLC, SNAP_BRIDGED, PID_ETHERNET, PAD_BRIDGED };
  71 +static const unsigned char pad[] = { PAD_BRIDGED };
  72  static const unsigned char llc_oui_ipv4[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV4 };
  73  static const unsigned char llc_oui_ipv6[] = { LLC, SNAP_ROUTED, ETHERTYPE_IPV6 };
  74
  75 @@ -453,7 +454,7 @@ static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb)
  76                         skb->pkt_type = PACKET_HOST;
  77                 } else { /* p_bridged */
  78                         /* first 2 chars should be 0 */
  79 -                       if (*((u16 *) (skb->data)) != 0)
  80 +                       if (memcmp(skb->data, pad, BR2684_PAD_LEN) != 0)
  81                                 goto error;
  82                         skb_pull(skb, BR2684_PAD_LEN);
  83                         skb->protocol = eth_type_trans(skb, net_dev);