4 * Mikrotik's RouterBOOT definitions
6 * Copyright (C) 2007 OpenWrt.org
7 * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License
11 * as published by the Free Software Foundation; either version 2
12 * of the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the
21 * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
22 * Boston, MA 02110-1301, USA.
30 struct rb_bios_settings
{
31 u32 hs_offs
; /* hard settings offset */
32 u32 hs_size
; /* hard settings size */
33 u32 fw_offs
; /* firmware offset */
34 u32 ss_offs
; /* soft settings offset */
35 u32 ss_size
; /* soft settings size */
38 struct rb_hard_settings
{
39 char *name
; /* board name */
40 char *bios_ver
; /* BIOS version */
41 u32 mem_size
; /* memory size in bytes */
42 u32 mac_count
; /* number of mac addresses */
43 u8
*mac_base
; /* mac address base */
49 #define RB_MAGIC_HARD 0x64726148 /* "Hard" */
50 #define RB_MAGIC_SOFT 0x74666F53 /* "Soft" */
51 #define RB_MAGIC_DAWN 0x6E776144 /* "Dawn" */
53 #define RB_ID_TERMINATOR 0
56 * ID values for Hardware settings
58 #define RB_ID_HARD_01 1
59 #define RB_ID_HARD_02 2
60 #define RB_ID_FLASH_INFO 3
61 #define RB_ID_MAC_ADDRESS_PACK 4
62 #define RB_ID_BOARD_NAME 5
63 #define RB_ID_BIOS_VERSION 6
64 #define RB_ID_HARD_07 7
65 #define RB_ID_SDRAM_TIMINGS 8
66 #define RB_ID_DEVICE_TIMINGS 9
67 #define RB_ID_SOFTWARE_ID 10
68 #define RB_ID_SERIAL_NUMBER 11
69 #define RB_ID_HARD_12 12
70 #define RB_ID_MEMORY_SIZE 13
71 #define RB_ID_MAC_ADDRESS_COUNT 14
74 * ID values for Software settings
76 #define RB_ID_UART_SPEED 1
77 #define RB_ID_BOOT_DELAY 2
78 #define RB_ID_BOOT_DEVICE 3
79 #define RB_ID_BOOT_KEY 4
80 #define RB_ID_CPU_MODE 5
81 #define RB_ID_FW_VERSION 6
82 #define RB_ID_SOFT_07 7
83 #define RB_ID_SOFT_08 8
84 #define RB_ID_BOOT_PROTOCOL 9
85 #define RB_ID_SOFT_10 10
86 #define RB_ID_SOFT_11 11
91 #define RB_UART_SPEED_115200 0
92 #define RB_UART_SPEED_57600 1
93 #define RB_UART_SPEED_38400 2
94 #define RB_UART_SPEED_19200 3
95 #define RB_UART_SPEED_9600 4
96 #define RB_UART_SPEED_4800 5
97 #define RB_UART_SPEED_2400 6
98 #define RB_UART_SPEED_1200 7
103 #define RB_BOOT_DELAY_0SEC 0
104 #define RB_BOOT_DELAY_1SEC 1
105 #define RB_BOOT_DELAY_2SEC 2
110 #define RB_BOOT_DEVICE_ETHER 0
111 #define RB_BOOT_DEVICE_NANDETH 1
112 #define RB_BOOT_DEVICE_ETHONCE 2
113 #define RB_BOOT_DEVICE_NANDONLY 3
118 #define RB_BOOT_KEY_ANY 0
119 #define RB_BOOT_KEY_DEL 1
124 #define RB_CPU_MODE_POWERSAVE 0
125 #define RB_CPU_MODE_REGULAR 1
128 * BOOT_PROTOCOL values
130 #define RB_BOOT_PROTOCOL_BOOTP 0
131 #define RB_BOOT_PROTOCOL_DHCP 1
133 extern int routerboot_present(void) __init
;
134 extern char *routerboot_get_boardname(void);
136 extern struct rb_hard_settings rb_hs
;
138 #endif /* _ROUTERBOOT_H */
This page took 0.068636 seconds and 5 git commands to generate.