openwrt/docs/hardware/soekris/net4801/dmesg-2.4.30.txt

   1 Linux version 2.4.30 (nthill@debian) (gcc version 3.4.4) #2 Sat Aug 13 01:30:32 CEST 2005
   2 BIOS-provided physical RAM map:
   3  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
   4  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
   5  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
   6  BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
   7  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
   8 128MB LOWMEM available.
   9 On node 0 totalpages: 32768
  10 zone(0): 4096 pages.
  11 zone(1): 28672 pages.
  12 zone(2): 0 pages.
  13 DMI not present.
  14 Kernel command line: blkmtd_device=/dev/hda2 root=/dev/mtdblock0 init=/etc/preinit noinitrd console=ttyS0,19200n8
  15 Initializing CPU#0
  16 Detected 266.650 MHz processor.
  17 Calibrating delay loop... 532.48 BogoMIPS
  18 Memory: 127284k/131072k available (1238k kernel code, 3400k reserved, 248k data, 80k init, 0k highmem)
  19 Checking if this processor honours the WP bit even in supervisor mode... Ok.
  20 Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
  21 Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
  22 Mount cache hash table entries: 512 (order: 0, 4096 bytes)
  23 Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
  24 Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
  25 CPU:     After generic, caps: 00808131 00818131 00000000 00000001
  26 CPU:             Common caps: 00808131 00818131 00000000 00000001
  27 CPU: NSC Unknown stepping 01
  28 Checking 'hlt' instruction... OK.
  29 POSIX conformance testing by UNIFIX
  30 PCI: PCI BIOS revision 2.01 entry at 0xf7861, last bus=0
  31 PCI: Using configuration type 1
  32 PCI: Probing PCI hardware
  33 PCI: Probing PCI hardware (bus 00)
  34 Linux NET4.0 for Linux 2.4
  35 Based upon Swansea University Computer Society NET3.039
  36 Initializing RT netlink socket
  37 Starting kswapd
  38 devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
  39 devfs: boot_options: 0x1
  40 JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
  41 Squashfs 2.1-r2 (released 2004/12/15) (C) 2002-2004 Phillip Lougher
  42 pty: 256 Unix98 ptys configured
  43 Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
  44 ttyS00 at 0x03f8 (irq = 4) is a 16550A
  45 ttyS01 at 0x02f8 (irq = 3) is a 16550A
  46 Software Watchdog Timer: 0.05, timer margin: 60 sec
  47 RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
  48 Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
  49 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  50 SC1200: IDE controller at PCI slot 00:12.2
  51 SC1200: chipset revision 1
  52 SC1200: not 100% native mode: will probe irqs later
  53     ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:pio, hdb:pio
  54     ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:pio
  55 hda: Transcend 256M, CFA DISK drive
  56 hdb: HTS424030M9AT00, ATA DISK drive
  57 SC1200: set xfer mode failure
  58 hdb: sc1200_set_xfer_mode(UDMA 2)
  59 blk: queue c02c421c, I/O limit 4095Mb (mask 0xffffffff)
  60 ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  61 hda: attached ide-disk driver.
  62 hda: 500736 sectors (256 MB) w/2KiB Cache, CHS=978/16/32
  63 hdb: attached ide-disk driver.
  64 hdb: host protected area => 1
  65 hdb: 58605120 sectors (30006 MB) w/1739KiB Cache, CHS=3648/255/63, UDMA(33)
  66 Partition check:
  67  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
  68  /dev/ide/host0/bus0/target1/lun0: p1 p2 p3
  69  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
  70 blkmtd: mtd0: [/dev/hda2] erase_size = 128KiB
  71 blkmtd: version 1.10
  72 Initializing Cryptographic API
  73 NET4: Linux TCP/IP 1.0 for NET4.0
  74 IP Protocols: ICMP, UDP, TCP, IGMP
  75 IP: routing cache hash table of 1024 buckets, 8Kbytes
  76 TCP: Hash tables configured (established 8192 bind 16384)
  77 ip_conntrack version 2.1 (5953 buckets, 5953 max) - 316 bytes per conntrack
  78 ip_tables: (C) 2000-2002 Netfilter core team
  79 NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
  80 NET4: Ethernet Bridge 008 for NET4.0
  81 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
  82 All bugs added by David S. Miller <davem@redhat.com>
  83 VFS: Mounted root (jffs2 filesystem) readonly.
  84 Mounted devfs on /dev
  85 Freeing unused kernel memory: 80k freed
  86 jffs2.bbc: SIZE compression mode activated.
  87 natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
  88   originally by Donald Becker <becker@scyld.com>
  89   http://www.scyld.com/network/natsemi.html
  90   2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
  91 eth0: NatSemi DP8381[56] at 0xc88ab000, 00:00:24:c2:45:7c, IRQ 10.
  92 eth1: NatSemi DP8381[56] at 0xc88ad000, 00:00:24:c2:45:7d, IRQ 10.
  93 eth2: NatSemi DP8381[56] at 0xc88af000, 00:00:24:c2:45:7e, IRQ 10.
  94 device eth0 entered promiscuous mode
  95 eth0: link up.
  96 eth0: Setting full-duplex based on negotiated link capability.
  97 eth0: Promiscuous mode enabled.
  98 eth0: Promiscuous mode enabled.
  99 eth0: Promiscuous mode enabled.
 100 eth0: Promiscuous mode enabled.
 101 eth0: Promiscuous mode enabled.
 102 br0: port 1(eth0) entering learning state
 103 br0: port 1(eth0) entering forwarding state
 104 br0: topology change detected, propagating