openwrt/docs/hardware/buffalo/wbr2-g54/nvram.txt

   1 wl0_net_mode=mixed
   2 os_ram_addr=80001000
   3 wl0_frameburst=off
   4 boardrev=0x10
   5 il0macaddr=00:0D:0B:1A:93:8D
   6 et0macaddr=00:0D:0B:1A:93:8C
   7 boot_wait=on
   8 watchdog=1000
   9 wl0_infra=1
  10 wl0_country_code=AU
  11 et0mdcport=0
  12 pmon_ver=CFE 3.51.21.10
  13 wl0_ifname=eth1
  14 gpio2=adm_eecs
  15 gpio3=adm_eesk
  16 gpio4=adm_eedi
  17 gpio5=adm_rc
  18 vlan0ports=1 2 3 4 5*
  19 wl0_mode=ap
  20 wl0_ap_isolate=0
  21 os_flash_addr=bfc40000
  22 wl0_gmode=6
  23 sromrev=2
  24 boardtype=0x0101
  25 lan_netmask=255.255.255.0
  26 wl0_dtim=1
  27 wl0_ssid=000D0B1A938D
  28 wl0_key1=
  29 wl0id=0x4320
  30 wl0_key2=
  31 wl0_key3=
  32 wl0_key4=
  33 pmon_date=Feb 20 2004 16:36:31
  34 ag0=255
  35 buffalo_id=29bb0332
  36 wl0_plcphdr=long
  37 wl0_rate=0
  38 wl0_closed=0
  39 wl0_macmode=disabled
  40 wl0gpio0=2
  41 wl0_radioids=BCM2050
  42 wl0gpio1=0
  43 wl0_phytype=g
  44 wl0gpio2=0
  45 wl0_lazywds=1
  46 wl0gpio3=0
  47 wl0gpio4=0
  48 wl0gpio5=0
  49 boardflags2=0
  50 wl0_afterburner=auto
  51 wl0_antdiv=-1
  52 wl0_wpa_psk=
  53 wl0_unit=0
  54 wl_country_code=AU
  55 memc_config=0x00048540
  56 pa0itssit=62
  57 wl0_wds=
  58 cctl=0
  59 wl0_radius_port=1812
  60 wl0_auth=0
  61 wl0_radius_ipaddr=
  62 pa0maxpwr=60
  63 clkfreq=200
  64 lan_ipaddr=192.168.11.1
  65 vlan1hwname=et0
  66 aa0=3
  67 wl0_phytypes=g
  68 wl0_frag=2346
  69 wl0_wep=disabled
  70 sdram_config=0x0032
  71 wl0_country=
  72 vlan1ports=0 5
  73 scratch=a0180000
  74 ccode=0
  75 wl0_rateset=default
  76 boardflags=0x0188
  77 sdram_refresh=0x0000
  78 sdram_ncdl=0x23
  79 wl0_rts=2347
  80 wl0_wpa_gtk_rekey=3600
  81 wl0_key=1
  82 et0phyaddr=30
  83 wl0_radio=1
  84 wl0_bcn=100
  85 wl0_hwaddr=00:0D:0B:1A:93:8D
  86 wl0_gmode_protection=auto
  87 pa0b0=0x1136
  88 wl0_maclist=
  89 pa0b1=0xfb93
  90 pa0b2=0xfea5
  91 sdram_init=0x0000
  92 vlan0hwname=et0
  93 dl_ram_addr=a0001000
  94 wl0_radius_key=
  95 wl0_corerev=7
  96 wl0_channel=11
  97 wl0_auth_mode=open
  98 wl0_crypto=tkip
  99 boardnum=00
 100