openwrt/package/base-files/default/etc/init.d/S10boot

   1 #!/bin/sh
   2 . /etc/nvram.sh
   3
   4 [ "$(uname -r|grep -c 2.4)" = "1" ] && {
   5         echo "S" > /proc/jffs2_bbc
   6 }
   7
   8 vconfig set_name_type VLAN_PLUS_VID_NO_PAD
   9
  10 HOSTNAME=$(nvram get wan_hostname)
  11 HOSTNAME=${HOSTNAME%%.*}
  12 echo ${HOSTNAME:=OpenWrt}>/proc/sys/kernel/hostname
  13
  14 # automagically run firstboot
  15 [ -z "$FAILSAFE" -a -z "$(nvram get no_root_swap)" ] && {
  16         { mount|grep "on / type jffs2" 1>&-; } || firstboot
  17 }
  18
  19 mkdir -p /var/run
  20 mkdir -p /var/log
  21 touch /var/log/wtmp
  22 touch /var/log/lastlog
  23 [ "$FAILSAFE" = "true" ] && touch /tmp/.failsafe
  24
  25 sed 's/^[^#]/insmod &/' /etc/modules /etc/modules.d/* 2>&-|ash
  26
  27 ifconfig lo 127.0.0.1 up
  28 ifconfig eth0 promisc
  29
  30 [ "$(uname -r|grep -c 2.6)" = "1" ] && [ -x /sbin/robocfg ] && { # FIXME: replace when the new switch driver is integrated...
  31   robocfg switch disable vlans enable reset vlan 0 ports "0 1 2 3 5t" vlan 1 ports "4 5t" port 4 state enabled stp none switch enable
  32   robocfg show
  33 }
  34
  35