package/strongswan/patches/210-updown.patch

   1 Index: strongswan-2.8.2/programs/_updown/_updown.8
   2 ===================================================================
   3 --- strongswan-2.8.2.orig/programs/_updown/_updown.8    2007-06-04 13:23:04.632029720 +0200
   4 +++ strongswan-2.8.2/programs/_updown/_updown.8 2007-06-04 13:23:06.656721920 +0200
   5 @@ -8,8 +8,23 @@
   6  .I _updown
   7  is invoked by pluto when it has brought up a new connection. This script
   8  is used to insert the appropriate routing entries for IPsec operation.
   9 -It can also be used to insert and delete dynamic iptables firewall rules.
  10 -The interface to the script is documented in the pluto man page.
  11 +It also inserts and deletes dynamic iptables firewall rules. IMPORTANT!
  12 +By default, it will ACCEPT as appropriate on the INPUT, OUTPUT, FORWARD
  13 +tables. Most distributions will want to change that to provide more
  14 +flexibility in their firewall configuration.
  15 +The script looks for the environment variables
  16 +.B IPSEC_UPDOWN_RULE_IN
  17 +for the iptables table it should insert into,
  18 +.B IPSEC_UPDOWN_DEST_IN
  19 +for where the rule should -j jump to,
  20 +.B IPSEC_UPDOWN_RULE_OUT
  21 +.B IPSEC_UPDOWN_DEST_OUT
  22 +for the same on outgoing packets, and
  23 +.B IPSEC_UPDOWN_FWD_RULE_IN
  24 +.B IPSEC_UPDOWN_FWD_DEST_IN
  25 +.B IPSEC_UPDOWN_FWD_RULE_OUT
  26 +.B IPSEC_UPDOWN_FWD_DEST_OUT
  27 +respectively for packets being forwarded to/from the local networks.
  28  .SH "SEE ALSO"
  29  ipsec(8), ipsec_pluto(8).
  30  .SH HISTORY
  31 Index: strongswan-2.8.2/programs/_updown/_updown.in
  32 ===================================================================
  33 --- strongswan-2.8.2.orig/programs/_updown/_updown.in   2007-06-04 13:23:04.642028200 +0200
  34 +++ strongswan-2.8.2/programs/_updown/_updown.in        2007-06-04 13:23:06.657721768 +0200
  35 @@ -5,6 +5,7 @@
  36  # Copyright (C) 2003-2004 Tuomo Soini
  37  # Copyright (C) 2002-2004 Michael Richardson
  38  # Copyright (C) 2005-2006 Andreas Steffen <andreas.steffen@strongswan.org>
  39 +# Copyright (C) 2007 Kevin Cody Jr <kcody@vegaresearch.com>
  40  #
  41  # This program is free software; you can redistribute it and/or modify it
  42  # under the terms of the GNU General Public License as published by the
  43 @@ -118,20 +119,61 @@
  44  #              restricted on the peer side.
  45  #
  46
  47 -# uncomment to log VPN connections
  48 -VPN_LOGGING=1
  49 -#
  50 +# set to /bin/true to silence log messages
  51 +LOGGER=logger
  52 +
  53  # tag put in front of each log entry:
  54  TAG=vpn
  55 -#
  56 +
  57  # syslog facility and priority used:
  58 -FAC_PRIO=local0.notice
  59 -#
  60 -# to create a special vpn logging file, put the following line into
  61 -# the syslog configuration file /etc/syslog.conf:
  62 -#
  63 -# local0.notice                   -/var/log/vpn
  64 -#
  65 +FAC_PRIO=authpriv.info
  66 +
  67 +
  68 +# in the presence of KLIPS and ipsecN interfaces do not use IPSEC_POLICY
  69 +if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ] ; then
  70 +       IPSEC_POLICY_IN=""
  71 +       IPSEC_POLICY_OUT=""
  72 +else
  73 +       IPSEC_POLICY="-m policy --pol ipsec --proto esp --reqid $PLUTO_REQID"
  74 +       IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
  75 +       IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
  76 +fi
  77 +
  78 +# are there port numbers?
  79 +if [ "$PLUTO_MY_PORT" != 0 ] ; then
  80 +       S_MY_PORT="--sport $PLUTO_MY_PORT"
  81 +       D_MY_PORT="--dport $PLUTO_MY_PORT"
  82 +fi
  83 +
  84 +if [ "$PLUTO_PEER_PORT" != 0 ] ; then
  85 +       S_PEER_PORT="--sport $PLUTO_PEER_PORT"
  86 +       D_PEER_PORT="--dport $PLUTO_PEER_PORT"
  87 +fi
  88 +
  89 +# import firewall behavior
  90 +IPT_RULE_IN=$IPSEC_UPDOWN_RULE_IN
  91 +IPT_DEST_IN=$IPSEC_UPDOWN_DEST_IN
  92 +IPT_RULE_OUT=$IPSEC_UPDOWN_RULE_OUT
  93 +IPT_DEST_OUT=$IPSEC_UPDOWN_DEST_OUT
  94 +
  95 +# import forwarding behavior
  96 +FWD_RULE_IN=$IPSEC_UPDOWN_FWD_RULE_IN
  97 +FWD_DEST_IN=$IPSEC_UPDOWN_FWD_DEST_IN
  98 +FWD_RULE_OUT=$IPSEC_UPDOWN_FWD_RULE_OUT
  99 +FWD_DEST_OUT=$IPSEC_UPDOWN_FWD_DEST_OUT
 100 +
 101 +# default firewall behavior
 102 +[ -z "$IPT_RULE_IN"  ] && IPT_RULE_IN=INPUT
 103 +[ -z "$IPT_DEST_IN"  ] && IPT_DEST_IN=ACCEPT
 104 +[ -z "$IPT_RULE_OUT" ] && IPT_RULE_OUT=OUTPUT
 105 +[ -z "$IPT_DEST_OUT" ] && IPT_DEST_OUT=ACCEPT
 106 +
 107 +# default forwarding behavior
 108 +[ -z "$FWD_RULE_IN"  ] && FWD_RULE_IN=FORWARD
 109 +[ -z "$FWD_DEST_IN"  ] && FWD_DEST_IN=ACCEPT
 110 +[ -z "$FWD_RULE_OUT" ] && FWD_RULE_OUT=FORWARD
 111 +[ -z "$FWD_DEST_OUT" ] && FWD_DEST_OUT=ACCEPT
 112 +
 113
 114  # check interface version
 115  case "$PLUTO_VERSION" in
 116 @@ -150,8 +192,6 @@
 117  case "$1:$*" in
 118  ':')                   # no parameters
 119         ;;
 120 -iptables:iptables)     # due to (left/right)firewall; for default script only
 121 -       ;;
 122  custom:*)              # custom parameters (see above CAUTION comment)
 123         ;;
 124  *)     echo "$0: unknown parameters \`$*'" >&2
 125 @@ -159,345 +199,307 @@
 126         ;;
 127  esac
 128
 129 +
 130  # utility functions for route manipulation
 131  # Meddling with this stuff should not be necessary and requires great care.
 132 +
 133  uproute() {
 134         doroute add
 135         ip route flush cache
 136  }
 137 +
 138  downroute() {
 139         doroute delete
 140         ip route flush cache
 141  }
 142
 143 +upfirewall() {
 144 +       in_rule=$1
 145 +       in_dest=$2
 146 +       out_rule=$3
 147 +       out_dest=$4
 148 +
 149 +       [ -n "$in_rule" -a -n "$in_dest" ] &&           \
 150 +       iptables -I $in_rule 1                          \
 151 +               -i $PLUTO_INTERFACE                     \
 152 +               -p $PLUTO_MY_PROTOCOL                   \
 153 +               -s $PLUTO_PEER_CLIENT   $S_PEER_PORT    \
 154 +               -d $PLUTO_MY_CLIENT     $D_MY_PORT      \
 155 +               $IPSEC_POLICY_IN                        \
 156 +               -j $in_dest
 157 +
 158 +       [ -n "$out_rule" -a -n "$out_dest" ] &&         \
 159 +       iptables -I $out_rule 1                         \
 160 +               -o $PLUTO_INTERFACE                     \
 161 +               -p $PLUTO_PEER_PROTOCOL                 \
 162 +               -s $PLUTO_MY_CLIENT     $S_MY_PORT      \
 163 +               -d $PLUTO_PEER_CLIENT   $D_PEER_PORT    \
 164 +               $IPSEC_POLICY_OUT                       \
 165 +               -j $out_dest
 166 +
 167 +}
 168 +
 169 +downfirewall() {
 170 +       in_rule=$1
 171 +       in_dest=$2
 172 +       out_rule=$3
 173 +       out_dest=$4
 174 +
 175 +       [ -n "$in_rule" -a -n "$in_dest" ] &&           \
 176 +       iptables -D $in_rule                            \
 177 +               -i $PLUTO_INTERFACE                     \
 178 +               -p $PLUTO_MY_PROTOCOL                   \
 179 +               -s $PLUTO_PEER_CLIENT   $S_PEER_PORT    \
 180 +               -d $PLUTO_MY_CLIENT     $D_MY_PORT      \
 181 +               $IPSEC_POLICY_IN                        \
 182 +               -j $in_dest
 183 +
 184 +       [ -n "$out_rule" -a -n "$out_dest" ] &&         \
 185 +       iptables -D $out_rule                           \
 186 +               -o $PLUTO_INTERFACE                     \
 187 +               -p $PLUTO_PEER_PROTOCOL                 \
 188 +               -s $PLUTO_MY_CLIENT     $S_MY_PORT      \
 189 +               -d $PLUTO_PEER_CLIENT   $D_PEER_PORT    \
 190 +               $IPSEC_POLICY_OUT                       \
 191 +               -j $out_dest
 192 +
 193 +}
 194 +
 195  addsource() {
 196         st=0
 197 -       if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local
 198 -       then
 199 +
 200 +       if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local ; then
 201 +
 202             it="ip addr add ${PLUTO_MY_SOURCEIP%/*}/32 dev $PLUTO_INTERFACE"
 203             oops="`eval $it 2>&1`"
 204             st=$?
 205 -           if test " $oops" = " " -a " $st" != " 0"
 206 -           then
 207 +
 208 +           if [ " $oops"  = " " -a " $st" != " 0" ] ; then
 209                 oops="silent error, exit status $st"
 210             fi
 211 -           if test " $oops" != " " -o " $st" != " 0"
 212 -           then
 213 +
 214 +           if [ " $oops" != " " -o " $st" != " 0" ] ; then
 215                 echo "$0: addsource \`$it' failed ($oops)" >&2
 216             fi
 217         fi
 218 +
 219         return $st
 220  }
 221
 222  doroute() {
 223         st=0
 224         parms="$PLUTO_PEER_CLIENT"
 225 +       parms2="dev $PLUTO_INTERFACE"
 226
 227 -       parms2=
 228 -       if [ -n "$PLUTO_NEXT_HOP" ]
 229 -       then
 230 -          parms2="via $PLUTO_NEXT_HOP"
 231 -       fi
 232 -       parms2="$parms2 dev $PLUTO_INTERFACE"
 233 -
 234 -       if [ -z "$PLUTO_MY_SOURCEIP" ]
 235 -       then
 236 -           if [ -f /etc/sysconfig/defaultsource ]
 237 -           then
 238 -               . /etc/sysconfig/defaultsource
 239 -           fi
 240 +       if [ -z "$PLUTO_MY_SOURCEIP" ] ; then
 241
 242 -           if [ -f /etc/conf.d/defaultsource ]
 243 -           then
 244 -               . /etc/conf.d/defaultsource
 245 -           fi
 246 +               [ -f /etc/sysconfig/defaultsource ] && \
 247 +                       . /etc/sysconfig/defaultsource
 248 +
 249 +               [ -f /etc/conf.d/defaultsource ] && \
 250 +                       . /etc/conf.d/defaultsource
 251 +
 252 +               [ -n "$DEFAULTSOURCE" ] && \
 253 +                       PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
 254
 255 -           if [ -n "$DEFAULTSOURCE" ]
 256 -           then
 257 -               PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
 258 -           fi
 259          fi
 260
 261         parms3=
 262 -       if test "$1" = "add" -a -n "$PLUTO_MY_SOURCEIP"
 263 -       then
 264 +       if [ "$1" = "add" -a -n "$PLUTO_MY_SOURCEIP" ] ; then
 265             addsource
 266             parms3="$parms3 src ${PLUTO_MY_SOURCEIP%/*}"
 267         fi
 268
 269 -       case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
 270 -       "0.0.0.0/0.0.0.0")
 271 +       if [ "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" = \
 272 +                                               "0.0.0.0/0.0.0.0" ] ; then
 273                 # opportunistic encryption work around
 274                 # need to provide route that eclipses default, without
 275                 # replacing it.
 276 -               it="ip route $1 0.0.0.0/1 $parms2 $parms3 &&
 277 -                       ip route $1 128.0.0.0/1 $parms2 $parms3"
 278 -               ;;
 279 -       *)      it="ip route $1 $parms $parms2 $parms3"
 280 -               ;;
 281 -       esac
 282 +               it="ip route $1   0.0.0.0/1 $parms2 $parms3 &&
 283 +                   ip route $1 128.0.0.0/1 $parms2 $parms3"
 284 +       else
 285 +               it="ip route $1 $parms $parms2 $parms3"
 286 +       fi
 287 +
 288         oops="`eval $it 2>&1`"
 289         st=$?
 290 -       if test " $oops" = " " -a " $st" != " 0"
 291 -       then
 292 -           oops="silent error, exit status $st"
 293 -       fi
 294 -       if test " $oops" != " " -o " $st" != " 0"
 295 -       then
 296 -           echo "$0: doroute \`$it' failed ($oops)" >&2
 297 +
 298 +       if [ " $oops" = " " -a " $st" != " 0" ] ; then
 299 +               oops="silent error, exit status $st"
 300         fi
 301 +
 302 +       if [ " $oops" != " " -o " $st" != " 0" ] ; then
 303 +               echo "$0: doroute \`$it' failed ($oops)" >&2
 304 +       fi
 305 +
 306         return $st
 307  }
 308 -
 309 -# in the presence of KLIPS and ipsecN interfaces do not use IPSEC_POLICY
 310 -if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ]
 311 -then
 312 -       IPSEC_POLICY_IN=""
 313 -       IPSEC_POLICY_OUT=""
 314 -else
 315 -       IPSEC_POLICY="-m policy --pol ipsec --proto esp --reqid $PLUTO_REQID"
 316 -       IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
 317 -       IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
 318 -fi
 319
 320 -# are there port numbers?
 321 -if [ "$PLUTO_MY_PORT" != 0 ]
 322 -then
 323 -       S_MY_PORT="--sport $PLUTO_MY_PORT"
 324 -       D_MY_PORT="--dport $PLUTO_MY_PORT"
 325 -fi
 326 -if [ "$PLUTO_PEER_PORT" != 0 ]
 327 -then
 328 -       S_PEER_PORT="--sport $PLUTO_PEER_PORT"
 329 -       D_PEER_PORT="--dport $PLUTO_PEER_PORT"
 330 -fi
 331 +dologentry() {
 332 +       action=$1
 333 +
 334 +       if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ] ; then
 335 +               rem="$PLUTO_PEER"
 336 +       else
 337 +               rem="$PLUTO_PEER_CLIENT == $PLUTO_PEER"
 338 +       fi
 339 +
 340 +       if [ "$PLUTO_MY_CLIENT" == "$PLUTO_ME/32" ] ; then
 341 +               loc="$PLUTO_ME"
 342 +       else
 343 +               loc="$PLUTO_ME == $PLUTO_MY_CLIENT"
 344 +       fi
 345 +
 346 +       $LOGGER -t $TAG -p $FAC_PRIO "$action $rem -- $loc ($PLUTO_PEER_ID)"
 347 +}
 348 +
 349
 350  # the big choice
 351 +
 352  case "$PLUTO_VERB:$1" in
 353  prepare-host:*|prepare-client:*)
 354         # delete possibly-existing route (preliminary to adding a route)
 355 -       case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
 356 -       "0.0.0.0/0.0.0.0")
 357 -               # need to provide route that eclipses default, without
 358 +
 359 +       if [ "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" = \
 360 +                                               "0.0.0.0/0.0.0.0" ] ; then
 361 +               # need to remove the route that eclipses default, without
 362                 # replacing it.
 363 -               parms1="0.0.0.0/1"
 364 -               parms2="128.0.0.0/1"
 365 -               it="ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1"
 366 -               oops="`ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1`"
 367 -               ;;
 368 -       *)
 369 -               parms="$PLUTO_PEER_CLIENT"
 370 -               it="ip route delete $parms 2>&1"
 371 -               oops="`ip route delete $parms 2>&1`"
 372 -               ;;
 373 -       esac
 374 -       status="$?"
 375 -       if test " $oops" = " " -a " $status" != " 0"
 376 -       then
 377 -               oops="silent error, exit status $status"
 378 +               it="( ip route delete   0.0.0.0/1 ;
 379 +                     ip route delete 128.0.0.0/1 )"
 380 +       else
 381 +               it="ip route delete $PLUTO_PEER_CLIENT"
 382 +       fi
 383 +
 384 +       oops="`$it 2>&1`"
 385 +       st="$?"
 386 +
 387 +       if [ " $oops" = " " -a " $st" != " 0" ] ; then
 388 +               oops="silent error, exit status $st"
 389         fi
 390 +
 391         case "$oops" in
 392         *'RTNETLINK answers: No such process'*)
 393                 # This is what route (currently -- not documented!) gives
 394                 # for "could not find such a route".
 395                 oops=
 396 -               status=0
 397 +               st=0
 398                 ;;
 399         esac
 400 -       if test " $oops" != " " -o " $status" != " 0"
 401 -       then
 402 +
 403 +       if [ " $oops" != " " -o " $st" != " 0" ] ; then
 404                 echo "$0: \`$it' failed ($oops)" >&2
 405         fi
 406 -       exit $status
 407 +
 408 +       exit $st
 409 +
 410         ;;
 411  route-host:*|route-client:*)
 412         # connection to me or my client subnet being routed
 413 +
 414 +       ipsec _showstatus valid
 415         uproute
 416 +
 417         ;;
 418  unroute-host:*|unroute-client:*)
 419         # connection to me or my client subnet being unrouted
 420 +
 421 +       ipsec _showstatus invalid
 422         downroute
 423 +
 424         ;;
 425 -up-host:)
 426 +up-host:*)
 427         # connection to me coming up
 428 -       # If you are doing a custom version, firewall commands go here.
 429 +
 430 +       ipsec _showstatus up
 431 +       upfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
 432 +       dologentry "VPN-UP"
 433 +
 434         ;;
 435 -down-host:)
 436 +down-host:*)
 437         # connection to me going down
 438 -       # If you are doing a custom version, firewall commands go here.
 439 -       ;;
 440 -up-client:)
 441 -       # connection to my client subnet coming up
 442 -       # If you are doing a custom version, firewall commands go here.
 443 -       ;;
 444 -down-client:)
 445 -       # connection to my client subnet going down
 446 -       # If you are doing a custom version, firewall commands go here.
 447 +
 448 +       ipsec _showstatus down
 449 +       downfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
 450 +       dologentry "VPN-DN"
 451 +
 452         ;;
 453 -up-host:iptables)
 454 -       # connection to me, with (left/right)firewall=yes, coming up
 455 -       # This is used only by the default updown script, not by your custom
 456 -       # ones, so do not mess with it; see CAUTION comment up at top.
 457 -       iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
 458 -           -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
 459 -           -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
 460 -       iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
 461 -           -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
 462 -           -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
 463 -       #
 464 -       # log IPsec host connection setup
 465 -       if [ $VPN_LOGGING ]
 466 -       then
 467 -         if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
 468 -         then
 469 -           logger -t $TAG -p $FAC_PRIO \
 470 -             "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME"
 471 -         else
 472 -           logger -t $TAG -p $FAC_PRIO \
 473 -             "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
 474 -         fi
 475 -       fi
 476 -       ;;
 477 -down-host:iptables)
 478 -       # connection to me, with (left/right)firewall=yes, going down
 479 -       # This is used only by the default updown script, not by your custom
 480 -       # ones, so do not mess with it; see CAUTION comment up at top.
 481 -       iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
 482 -           -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
 483 -           -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
 484 -       iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
 485 -           -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
 486 -           -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
 487 -       #
 488 -       # log IPsec host connection teardown
 489 -       if [ $VPN_LOGGING ]
 490 -       then
 491 -         if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
 492 -         then
 493 -           logger -t $TAG -p $FAC_PRIO -- \
 494 -             "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME"
 495 -         else
 496 -           logger -t $TAG -p $FAC_PRIO -- \
 497 -           "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
 498 -         fi
 499 -       fi
 500 -       ;;
 501 -up-client:iptables)
 502 -       # connection to client subnet, with (left/right)firewall=yes, coming up
 503 -       # This is used only by the default updown script, not by your custom
 504 -       # ones, so do not mess with it; see CAUTION comment up at top.
 505 -       if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
 506 -       then
 507 -         iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
 508 -             -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
 509 -             -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
 510 -                $IPSEC_POLICY_OUT -j ACCEPT
 511 -         iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
 512 -             -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
 513 -             -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
 514 -                $IPSEC_POLICY_IN -j ACCEPT
 515 +up-client:*)
 516 +       # connection to client subnet coming up
 517 +
 518 +       ipsec _showstatus up
 519 +
 520 +       if [ "$PLUTO_MY_CLIENT" != "$PLUTO_ME/32" -a \
 521 +            "$PLUTO_MY_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ] ; then
 522 +               upfirewall $FWD_RULE_IN $FWD_DEST_IN $FWD_RULE_OUT $FWD_DEST_OUT
 523         fi
 524 -       #
 525 +
 526         # a virtual IP requires an INPUT and OUTPUT rule on the host
 527         # or sometimes host access via the internal IP is needed
 528 -       if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
 529 -       then
 530 -         iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
 531 -             -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
 532 -             -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
 533 -                $IPSEC_POLICY_IN -j ACCEPT
 534 -         iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
 535 -             -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
 536 -             -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
 537 -                $IPSEC_POLICY_OUT -j ACCEPT
 538 -       fi
 539 -       #
 540 -       # log IPsec client connection setup
 541 -       if [ $VPN_LOGGING ]
 542 -       then
 543 -         if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
 544 -         then
 545 -           logger -t $TAG -p $FAC_PRIO \
 546 -             "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
 547 -         else
 548 -           logger -t $TAG -p $FAC_PRIO \
 549 -             "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
 550 -         fi
 551 -       fi
 552 -       ;;
 553 -down-client:iptables)
 554 -       # connection to client subnet, with (left/right)firewall=yes, going down
 555 -       # This is used only by the default updown script, not by your custom
 556 -       # ones, so do not mess with it; see CAUTION comment up at top.
 557 -       if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
 558 -       then
 559 -         iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
 560 -             -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
 561 -             -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
 562 -                $IPSEC_POLICY_OUT -j ACCEPT
 563 -         iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
 564 -             -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
 565 -             -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
 566 -                $IPSEC_POLICY_IN -j ACCEPT
 567 +       if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ] ; then
 568 +               upfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
 569 +       fi
 570 +
 571 +       dologentry "VPN-UP"
 572 +
 573 +       ;;
 574 +down-client:*)
 575 +       # connection to client subnet going down
 576 +
 577 +       ipsec _showstatus down
 578 +
 579 +       if [ "$PLUTO_MY_CLIENT" != "$PLUTO_ME/32" -a \
 580 +            "$PLUTO_MY_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ] ; then
 581 +               downfirewall $FWD_RULE_IN $FWD_DEST_IN $FWD_RULE_OUT $FWD_DEST_OUT
 582         fi
 583 -       #
 584 +
 585         # a virtual IP requires an INPUT and OUTPUT rule on the host
 586         # or sometimes host access via the internal IP is needed
 587 -       if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
 588 -       then
 589 -         iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
 590 -             -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
 591 -             -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
 592 -                $IPSEC_POLICY_IN -j ACCEPT
 593 -         iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
 594 -             -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
 595 -             -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
 596 -                $IPSEC_POLICY_OUT -j ACCEPT
 597 -       fi
 598 -       #
 599 -       # log IPsec client connection teardown
 600 -       if [ $VPN_LOGGING ]
 601 -       then
 602 -         if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
 603 -         then
 604 -           logger -t $TAG -p $FAC_PRIO -- \
 605 -             "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
 606 -         else
 607 -           logger -t $TAG -p $FAC_PRIO -- \
 608 -             "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
 609 -         fi
 610 +       if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ] ; then
 611 +               downfirewall $IPT_RULE_IN $IPT_DEST_IN $IPT_RULE_OUT $OUT_DEST_OUT
 612         fi
 613 +
 614 +       dologentry "VPN-DN"
 615 +
 616         ;;
 617 -#
 618 -# IPv6
 619 -#
 620  prepare-host-v6:*|prepare-client-v6:*)
 621 +
 622         ;;
 623  route-host-v6:*|route-client-v6:*)
 624         # connection to me or my client subnet being routed
 625 +
 626         #uproute_v6
 627 +
 628         ;;
 629  unroute-host-v6:*|unroute-client-v6:*)
 630         # connection to me or my client subnet being unrouted
 631 +
 632         #downroute_v6
 633 +
 634         ;;
 635  up-host-v6:*)
 636         # connection to me coming up
 637         # If you are doing a custom version, firewall commands go here.
 638 +
 639         ;;
 640  down-host-v6:*)
 641         # connection to me going down
 642         # If you are doing a custom version, firewall commands go here.
 643 +
 644         ;;
 645  up-client-v6:)
 646         # connection to my client subnet coming up
 647         # If you are doing a custom version, firewall commands go here.
 648 +
 649         ;;
 650  down-client-v6:)
 651         # connection to my client subnet going down
 652         # If you are doing a custom version, firewall commands go here.
 653 +
 654         ;;
 655 -*)     echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
 656 +*)
 657 +       echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
 658         exit 1
 659 +
 660         ;;
 661  esac
 662 +