add md5sum for lzma
[openwrt.git] / openwrt / docs / hardware / linksys / wrt54g_v11 / lspci-vv.txt
1 0000:00:00.0 RAM memory: Broadcom Corporation: Unknown device 0803
2 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
3 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
4 Interrupt: pin ? routed to IRQ 6
5 Region 0: Memory at 18000000 (32-bit, non-prefetchable) [disabled] [size=4K]
6 Region 1: Memory at <unassigned> (32-bit, non-prefetchable) [disabled] [size=128M]
7 Region 2: Memory at 10000000 (32-bit, non-prefetchable) [disabled] [size=128M]
8 Region 3: Memory at 80000000 (32-bit, non-prefetchable) [disabled] [size=80000000]
9 Expansion ROM at <unassigned> [disabled] [size=2K]
10
11 0000:00:01.0 Ethernet controller: Broadcom Corporation BCM47xx Sentry5 iLine32 HomePNA 2.0
12 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
13 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
14 Interrupt: pin B routed to IRQ 5
15 Region 0: Memory at 18001000 (32-bit, non-prefetchable) [disabled] [size=4K]
16 Expansion ROM at <unassigned> [disabled] [size=2K]
17
18 0000:00:02.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
19 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
20 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
21 Latency: 64
22 Interrupt: pin A routed to IRQ 3
23 Region 0: Memory at 18002000 (32-bit, non-prefetchable) [disabled] [size=4K]
24 Expansion ROM at <unassigned> [disabled] [size=2K]
25
26 0000:00:03.0 Modem: Broadcom Corporation Sentry5 UART (prog-if 00 [Generic])
27 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
28 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
29 Interrupt: pin C routed to IRQ 2
30 Region 0: Memory at 18003000 (32-bit, non-prefetchable) [disabled] [size=4K]
31 Expansion ROM at <unassigned> [disabled] [size=2K]
32
33 0000:00:04.0 USB Controller: Broadcom Corporation Sentry5 USB Controller (prog-if 10 [OHCI])
34 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
35 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
36 Interrupt: pin D routed to IRQ 2
37 Region 0: Memory at 18004000 (32-bit, non-prefetchable) [disabled] [size=4K]
38 Expansion ROM at <unassigned> [disabled] [size=2K]
39
40 0000:00:05.0 PCI bridge: Broadcom Corporation Sentry5 PCI Bridge (prog-if 00 [Normal decode])
41 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
42 Status: Cap+ 66MHz+ UDF+ FastB2B+ ParErr+ DEVSEL=?? >TAbort+ <TAbort+ <MAbort+ >SERR+ <PERR+
43 Region 0: Memory at 18005000 (32-bit, non-prefetchable) [disabled] [size=4K]
44 Region 1: Memory at 08000000 (32-bit, non-prefetchable) [disabled] [size=128M]
45 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
46 I/O behind bridge: 00000000-00000fff
47 Memory behind bridge: 00000000-000fffff
48 Prefetchable memory behind bridge: 00000000-000fffff
49 Expansion ROM at <unassigned> [disabled] [size=2K]
50 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
51
52 0000:00:06.0 MIPS: Broadcom Corporation Sentry5 MIPS32 CPU
53 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
54 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
55 Interrupt: pin ? routed to IRQ 6
56 Region 0: Memory at 18006000 (32-bit, non-prefetchable) [disabled] [size=4K]
57 Region 1: Memory at ff200000 (32-bit, non-prefetchable) [disabled] [size=2M]
58 Expansion ROM at <unassigned> [disabled] [size=2K]
59
60 0000:00:07.0 FLASH memory: Broadcom Corporation Sentry5 External Interface Core
61 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
62 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
63 Interrupt: pin E routed to IRQ 2
64 Region 0: Memory at 18007000 (32-bit, non-prefetchable) [disabled] [size=4K]
65 Region 1: Memory at 1f000000 (32-bit, non-prefetchable) [disabled] [size=16M]
66 Expansion ROM at <unassigned> [disabled] [size=2K]
67
68 0000:00:08.0 Ethernet controller: Broadcom Corporation Sentry5 Ethernet Controller
69 Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
70 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
71 Latency: 64
72 Interrupt: pin F routed to IRQ 4
73 Region 0: Memory at 18008000 (32-bit, non-prefetchable) [disabled] [size=4K]
74 Expansion ROM at <unassigned> [disabled] [size=2K]
75
76 0000:01:00.0 Host bridge: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge (rev 01)
77 Subsystem: Broadcom Corporation BCM4710 Sentry5 PCI to SB Bridge
78 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
79 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
80 Latency: 64
81 Interrupt: pin A routed to IRQ 6
82 Region 0: Memory at 40000000 (32-bit, non-prefetchable) [size=8K]
83 Region 1: Memory at <unassigned> (32-bit, prefetchable) [size=128M]
84
85 0000:01:08.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 03)
86 Subsystem: Tekram Technology Co.,Ltd.: Unknown device 1603
87 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
88 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
89 Latency: 64
90 Interrupt: pin A routed to IRQ 6
91 Region 0: Memory at 40002000 (32-bit, non-prefetchable) [size=8K]
92
This page took 0.046381 seconds and 5 git commands to generate.