ar71xx: update early_printk code
[openwrt.git] / target / linux / lantiq / patches-2.6.32 / 0013-MIPS-Lantiq-Add-watchdog-support.patch
1 From 3466449c8f455da0cb646231602e6af16190f592 Mon Sep 17 00:00:00 2001
2 From: John Crispin <blogic@openwrt.org>
3 Date: Thu, 5 May 2011 23:00:23 +0200
4 Subject: [PATCH 13/13] MIPS: Lantiq: Add watchdog support
5
6 This patch adds the driver for the watchdog found inside the Lantiq SoC family.
7
8 Signed-off-by: John Crispin <blogic@openwrt.org>
9 Signed-off-by: Ralph Hempel <ralph.hempel@lantiq.com>
10 Cc: Wim Van Sebroeck <wim@iguana.be>
11 Cc: linux-mips@linux-mips.org
12 Cc: linux-watchdog@vger.kernel.org
13 Patchwork: https://patchwork.linux-mips.org/patch/2327/
14 Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
15 ---
16 drivers/watchdog/Kconfig | 6 +
17 drivers/watchdog/Makefile | 1 +
18 drivers/watchdog/lantiq_wdt.c | 261 +++++++++++++++++++++++++++++++++++++++++
19 3 files changed, 268 insertions(+), 0 deletions(-)
20 create mode 100644 drivers/watchdog/lantiq_wdt.c
21
22 --- a/drivers/watchdog/Kconfig
23 +++ b/drivers/watchdog/Kconfig
24 @@ -850,6 +850,12 @@
25 help
26 Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
27
28 +config LANTIQ_WDT
29 + tristate "Lantiq SoC watchdog"
30 + depends on LANTIQ
31 + help
32 + Hardware driver for the Lantiq SoC Watchdog Timer.
33 +
34 # PARISC Architecture
35
36 # POWERPC Architecture
37 --- a/drivers/watchdog/Makefile
38 +++ b/drivers/watchdog/Makefile
39 @@ -113,6 +113,7 @@
40 obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
41 obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
42 obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
43 +obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o
44
45 # PARISC Architecture
46
47 --- /dev/null
48 +++ b/drivers/watchdog/lantiq_wdt.c
49 @@ -0,0 +1,261 @@
50 +/*
51 + * This program is free software; you can redistribute it and/or modify it
52 + * under the terms of the GNU General Public License version 2 as published
53 + * by the Free Software Foundation.
54 + *
55 + * Copyright (C) 2010 John Crispin <blogic@openwrt.org>
56 + * Based on EP93xx wdt driver
57 + */
58 +
59 +#include <linux/module.h>
60 +#include <linux/fs.h>
61 +#include <linux/miscdevice.h>
62 +#include <linux/watchdog.h>
63 +#include <linux/platform_device.h>
64 +#include <linux/uaccess.h>
65 +#include <linux/clk.h>
66 +#include <linux/io.h>
67 +
68 +#include <lantiq.h>
69 +
70 +/* Section 3.4 of the datasheet
71 + * The password sequence protects the WDT control register from unintended
72 + * write actions, which might cause malfunction of the WDT.
73 + *
74 + * essentially the following two magic passwords need to be written to allow
75 + * IO access to the WDT core
76 + */
77 +#define LTQ_WDT_PW1 0x00BE0000
78 +#define LTQ_WDT_PW2 0x00DC0000
79 +
80 +#define LTQ_WDT_CR 0x0 /* watchdog control register */
81 +#define LTQ_WDT_SR 0x8 /* watchdog status register */
82 +
83 +#define LTQ_WDT_SR_EN (0x1 << 31) /* enable bit */
84 +#define LTQ_WDT_SR_PWD (0x3 << 26) /* turn on power */
85 +#define LTQ_WDT_SR_CLKDIV (0x3 << 24) /* turn on clock and set */
86 + /* divider to 0x40000 */
87 +#define LTQ_WDT_DIVIDER 0x40000
88 +#define LTQ_MAX_TIMEOUT ((1 << 16) - 1) /* the reload field is 16 bit */
89 +
90 +static int nowayout = WATCHDOG_NOWAYOUT;
91 +
92 +static void __iomem *ltq_wdt_membase;
93 +static unsigned long ltq_io_region_clk_rate;
94 +
95 +static unsigned long ltq_wdt_bootstatus;
96 +static unsigned long ltq_wdt_in_use;
97 +static int ltq_wdt_timeout = 30;
98 +static int ltq_wdt_ok_to_close;
99 +
100 +static void
101 +ltq_wdt_enable(void)
102 +{
103 + ltq_wdt_timeout = ltq_wdt_timeout *
104 + (ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000;
105 + if (ltq_wdt_timeout > LTQ_MAX_TIMEOUT)
106 + ltq_wdt_timeout = LTQ_MAX_TIMEOUT;
107 +
108 + /* write the first password magic */
109 + ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
110 + /* write the second magic plus the configuration and new timeout */
111 + ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV |
112 + LTQ_WDT_PW2 | ltq_wdt_timeout, ltq_wdt_membase + LTQ_WDT_CR);
113 +}
114 +
115 +static void
116 +ltq_wdt_disable(void)
117 +{
118 + /* write the first password magic */
119 + ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR);
120 + /* write the second password magic with no config
121 + * this turns the watchdog off
122 + */
123 + ltq_w32(LTQ_WDT_PW2, ltq_wdt_membase + LTQ_WDT_CR);
124 +}
125 +
126 +static ssize_t
127 +ltq_wdt_write(struct file *file, const char __user *data,
128 + size_t len, loff_t *ppos)
129 +{
130 + if (len) {
131 + if (!nowayout) {
132 + size_t i;
133 +
134 + ltq_wdt_ok_to_close = 0;
135 + for (i = 0; i != len; i++) {
136 + char c;
137 +
138 + if (get_user(c, data + i))
139 + return -EFAULT;
140 + if (c == 'V')
141 + ltq_wdt_ok_to_close = 1;
142 + else
143 + ltq_wdt_ok_to_close = 0;
144 + }
145 + }
146 + ltq_wdt_enable();
147 + }
148 +
149 + return len;
150 +}
151 +
152 +static struct watchdog_info ident = {
153 + .options = WDIOF_MAGICCLOSE | WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
154 + WDIOF_CARDRESET,
155 + .identity = "ltq_wdt",
156 +};
157 +
158 +static long
159 +ltq_wdt_ioctl(struct file *file,
160 + unsigned int cmd, unsigned long arg)
161 +{
162 + int ret = -ENOTTY;
163 +
164 + switch (cmd) {
165 + case WDIOC_GETSUPPORT:
166 + ret = copy_to_user((struct watchdog_info __user *)arg, &ident,
167 + sizeof(ident)) ? -EFAULT : 0;
168 + break;
169 +
170 + case WDIOC_GETBOOTSTATUS:
171 + ret = put_user(ltq_wdt_bootstatus, (int __user *)arg);
172 + break;
173 +
174 + case WDIOC_GETSTATUS:
175 + ret = put_user(0, (int __user *)arg);
176 + break;
177 +
178 + case WDIOC_SETTIMEOUT:
179 + ret = get_user(ltq_wdt_timeout, (int __user *)arg);
180 + if (!ret)
181 + ltq_wdt_enable();
182 + /* intentional drop through */
183 + case WDIOC_GETTIMEOUT:
184 + ret = put_user(ltq_wdt_timeout, (int __user *)arg);
185 + break;
186 +
187 + case WDIOC_KEEPALIVE:
188 + ltq_wdt_enable();
189 + ret = 0;
190 + break;
191 + }
192 + return ret;
193 +}
194 +
195 +static int
196 +ltq_wdt_open(struct inode *inode, struct file *file)
197 +{
198 + if (test_and_set_bit(0, &ltq_wdt_in_use))
199 + return -EBUSY;
200 + ltq_wdt_in_use = 1;
201 + ltq_wdt_enable();
202 +
203 + return nonseekable_open(inode, file);
204 +}
205 +
206 +static int
207 +ltq_wdt_release(struct inode *inode, struct file *file)
208 +{
209 + if (ltq_wdt_ok_to_close)
210 + ltq_wdt_disable();
211 + else
212 + pr_err("ltq_wdt: watchdog closed without warning\n");
213 + ltq_wdt_ok_to_close = 0;
214 + clear_bit(0, &ltq_wdt_in_use);
215 +
216 + return 0;
217 +}
218 +
219 +static const struct file_operations ltq_wdt_fops = {
220 + .owner = THIS_MODULE,
221 + .write = ltq_wdt_write,
222 + .unlocked_ioctl = ltq_wdt_ioctl,
223 + .open = ltq_wdt_open,
224 + .release = ltq_wdt_release,
225 + .llseek = no_llseek,
226 +};
227 +
228 +static struct miscdevice ltq_wdt_miscdev = {
229 + .minor = WATCHDOG_MINOR,
230 + .name = "watchdog",
231 + .fops = &ltq_wdt_fops,
232 +};
233 +
234 +static int __init
235 +ltq_wdt_probe(struct platform_device *pdev)
236 +{
237 + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
238 + struct clk *clk;
239 +
240 + if (!res) {
241 + dev_err(&pdev->dev, "cannot obtain I/O memory region");
242 + return -ENOENT;
243 + }
244 + res = devm_request_mem_region(&pdev->dev, res->start,
245 + resource_size(res), dev_name(&pdev->dev));
246 + if (!res) {
247 + dev_err(&pdev->dev, "cannot request I/O memory region");
248 + return -EBUSY;
249 + }
250 + ltq_wdt_membase = devm_ioremap_nocache(&pdev->dev, res->start,
251 + resource_size(res));
252 + if (!ltq_wdt_membase) {
253 + dev_err(&pdev->dev, "cannot remap I/O memory region\n");
254 + return -ENOMEM;
255 + }
256 +
257 + /* we do not need to enable the clock as it is always running */
258 + clk = clk_get(&pdev->dev, "io");
259 + WARN_ON(!clk);
260 + ltq_io_region_clk_rate = clk_get_rate(clk);
261 + clk_put(clk);
262 +
263 + if (ltq_reset_cause() == LTQ_RST_CAUSE_WDTRST)
264 + ltq_wdt_bootstatus = WDIOF_CARDRESET;
265 +
266 + return misc_register(&ltq_wdt_miscdev);
267 +}
268 +
269 +static int __devexit
270 +ltq_wdt_remove(struct platform_device *pdev)
271 +{
272 + misc_deregister(&ltq_wdt_miscdev);
273 +
274 + if (ltq_wdt_membase)
275 + iounmap(ltq_wdt_membase);
276 +
277 + return 0;
278 +}
279 +
280 +
281 +static struct platform_driver ltq_wdt_driver = {
282 + .remove = __devexit_p(ltq_wdt_remove),
283 + .driver = {
284 + .name = "ltq_wdt",
285 + .owner = THIS_MODULE,
286 + },
287 +};
288 +
289 +static int __init
290 +init_ltq_wdt(void)
291 +{
292 + return platform_driver_probe(&ltq_wdt_driver, ltq_wdt_probe);
293 +}
294 +
295 +static void __exit
296 +exit_ltq_wdt(void)
297 +{
298 + return platform_driver_unregister(&ltq_wdt_driver);
299 +}
300 +
301 +module_init(init_ltq_wdt);
302 +module_exit(exit_ltq_wdt);
303 +
304 +module_param(nowayout, int, 0);
305 +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started");
306 +
307 +MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
308 +MODULE_DESCRIPTION("Lantiq SoC Watchdog");
309 +MODULE_LICENSE("GPL");
310 +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
This page took 0.062653 seconds and 5 git commands to generate.