2 * Custom OID/ioctl definitions for
3 * Broadcom 802.11abg Networking Device Driver
5 * Definitions subject to change without notice.
7 * Copyright 2004, Broadcom Corporation
10 * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
11 * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
12 * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
13 * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
22 #include <proto/ethernet.h>
23 #include <proto/802.11.h>
26 #define PACKED __attribute__((packed))
31 #define WL_NUMRATES 255 /* max # of rates in a rateset */
33 typedef struct wl_rateset
{
34 uint32 count
; /* # rates in this set */
35 uint8 rates
[WL_NUMRATES
]; /* rates in 500kbps units w/hi bit set if basic */
38 #define WL_CHANSPEC_CHAN_MASK 0x0fff
39 #define WL_CHANSPEC_BAND_MASK 0xf000
40 #define WL_CHANSPEC_BAND_SHIFT 12
41 #define WL_CHANSPEC_BAND_A 0x1000
42 #define WL_CHANSPEC_BAND_B 0x2000
45 * Per-bss information structure.
48 #define WL_LEGACY_BSS_INFO_VERSION 106 /* an older supported version of wl_bss_info struct */
49 #define WL_BSS_INFO_VERSION 107 /* current version of wl_bss_info struct */
51 typedef struct wl_bss_info106
{
52 uint version
; /* version field */
53 struct ether_addr BSSID
;
56 uint8 Privacy
; /* 0=No WEP, 1=Use WEP */
57 int16 RSSI
; /* receive signal strength (in dBm) */
58 uint16 beacon_period
; /* units are Kusec */
59 uint16 atim_window
; /* units are Kusec */
60 uint8 channel
; /* Channel no. */
61 int8 infra
; /* 0=IBSS, 1=infrastructure, 2=unknown */
63 uint count
; /* # rates in this set */
64 uint8 rates
[12]; /* rates in 500kbps units w/hi bit set if basic */
65 } rateset
; /* supported rates */
66 uint8 dtim_period
; /* DTIM period */
67 int8 phy_noise
; /* noise right after tx (in dBm) */
68 uint16 capability
; /* Capability information */
69 struct dot11_bcn_prb
*prb
; /* probe response frame (ioctl na) */
70 uint16 prb_len
; /* probe response frame length (ioctl na) */
72 uint8 supported
; /* wpa supported */
73 uint8 multicast
; /* multicast cipher */
74 uint8 ucount
; /* count of unicast ciphers */
75 uint8 unicast
[4]; /* unicast ciphers */
76 uint8 acount
; /* count of auth modes */
77 uint8 auth
[4]; /* Authentication modes */
81 typedef struct wl_bss_info
{
82 uint32 version
; /* version field */
83 uint32 length
; /* byte length of data in this record, starting at version and including IEs */
84 struct ether_addr BSSID
;
85 uint16 beacon_period
; /* units are Kusec */
86 uint16 capability
; /* Capability information */
90 uint count
; /* # rates in this set */
91 uint8 rates
[16]; /* rates in 500kbps units w/hi bit set if basic */
92 } rateset
; /* supported rates */
93 uint8 channel
; /* Channel no. */
94 uint16 atim_window
; /* units are Kusec */
95 uint8 dtim_period
; /* DTIM period */
96 int16 RSSI
; /* receive signal strength (in dBm) */
97 int8 phy_noise
; /* noise (in dBm) */
98 uint32 ie_length
; /* byte length of Information Elements */
99 /* variable length Information Elements */
102 typedef struct wlc_ssid
{
107 typedef struct wl_scan_params
{
108 wlc_ssid_t ssid
; /* default is {0, ""} */
109 struct ether_addr bssid
;/* default is bcast */
110 int8 bss_type
; /* default is any, DOT11_BSSTYPE_ANY/INFRASTRUCTURE/INDEPENDENT */
111 int8 scan_type
; /* -1 use default, DOT11_SCANTYPE_ACTIVE/PASSIVE */
112 int32 nprobes
; /* -1 use default, number of probes per channel */
113 int32 active_time
; /* -1 use default, dwell time per channel for active scanning */
114 int32 passive_time
; /* -1 use default, dwell time per channel for passive scanning */
115 int32 home_time
; /* -1 use default, dwell time for the home channel between channel scans */
116 int32 channel_num
; /* 0 use default (all available channels), count of channels in channel_list */
117 uint16 channel_list
[1]; /* list of chanspecs */
119 /* size of wl_scan_params not including variable length array */
120 #define WL_SCAN_PARAMS_FIXED_SIZE 64
122 typedef struct wl_scan_results
{
126 wl_bss_info_t bss_info
[1];
128 /* size of wl_scan_results not including variable length array */
129 #define WL_SCAN_RESULTS_FIXED_SIZE 12
132 typedef struct wl_uint32_list
{
133 /* in - # of elements, out - # of entries */
135 /* variable length uint32 list */
139 #define WLC_CNTRY_BUF_SZ 4 /* Country string is 3 bytes + NULL */
141 typedef struct wl_channels_in_country
{
144 char country_abbrev
[WLC_CNTRY_BUF_SZ
];
147 } wl_channels_in_country_t
;
149 typedef struct wl_country_list
{
154 char country_abbrev
[1];
157 #define WL_RM_TYPE_BASIC 1
158 #define WL_RM_TYPE_CCA 2
159 #define WL_RM_TYPE_RPI 3
161 #define WL_RM_FLAG_PARALLEL (1<<0)
163 #define WL_RM_FLAG_LATE (1<<1)
164 #define WL_RM_FLAG_INCAPABLE (1<<2)
165 #define WL_RM_FLAG_REFUSED (1<<3)
167 typedef struct wl_rm_req_elt
{
171 uint32 token
; /* token for this measurement */
172 uint32 tsf_h
; /* TSF high 32-bits of Measurement start time */
173 uint32 tsf_l
; /* TSF low 32-bits */
174 uint32 dur
; /* TUs */
177 typedef struct wl_rm_req
{
178 uint32 token
; /* overall measurement set token */
179 uint32 count
; /* number of measurement reqests */
180 wl_rm_req_elt_t req
[1]; /* variable length block of requests */
182 #define WL_RM_REQ_FIXED_LEN 8
184 typedef struct wl_rm_rep_elt
{
188 uint32 token
; /* token for this measurement */
189 uint32 tsf_h
; /* TSF high 32-bits of Measurement start time */
190 uint32 tsf_l
; /* TSF low 32-bits */
191 uint32 dur
; /* TUs */
192 uint32 len
; /* byte length of data block */
193 uint8 data
[1]; /* variable length data block */
195 #define WL_RM_REP_ELT_FIXED_LEN 24 /* length excluding data block */
197 #define WL_RPI_REP_BIN_NUM 8
198 typedef struct wl_rm_rpi_rep
{
199 uint8 rpi
[WL_RPI_REP_BIN_NUM
];
200 int8 rpi_max
[WL_RPI_REP_BIN_NUM
];
203 typedef struct wl_rm_rep
{
204 uint32 token
; /* overall measurement set token */
205 uint32 len
; /* length of measurement report block */
206 wl_rm_rep_elt_t rep
[1]; /* variable length block of reports */
208 #define WL_RM_REP_FIXED_LEN 8
212 typedef enum sup_auth_status
{
213 WLC_SUP_DISCONNECTED
= 0,
216 WLC_SUP_AUTHENTICATING
,
217 WLC_SUP_AUTHENTICATED
,
221 #endif /* CCX | WPAPSK */
223 /* Enumerate crypto algorithms */
224 #define CRYPTO_ALGO_OFF 0
225 #define CRYPTO_ALGO_WEP1 1
226 #define CRYPTO_ALGO_TKIP 2
227 #define CRYPTO_ALGO_WEP128 3
228 #define CRYPTO_ALGO_AES_CCM 4
229 #define CRYPTO_ALGO_AES_OCB_MSDU 5
230 #define CRYPTO_ALGO_AES_OCB_MPDU 6
231 #define CRYPTO_ALGO_NALG 7
233 #define WSEC_GEN_MIC_ERROR 0x0001
234 #define WSEC_GEN_REPLAY 0x0002
236 #define WL_SOFT_KEY (1 << 0) /* Indicates this key is using soft encrypt */
237 #define WL_PRIMARY_KEY (1 << 1) /* Indicates this key is the primary (ie tx) key */
238 #define WL_KF_RES_4 (1 << 4) /* Reserved for backward compat */
239 #define WL_KF_RES_5 (1 << 5) /* Reserved for backward compat */
241 typedef struct wl_wsec_key
{
242 uint32 index
; /* key index */
243 uint32 len
; /* key length */
244 uint8 data
[DOT11_MAX_KEY_SIZE
]; /* key data */
246 uint32 algo
; /* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
247 uint32 flags
; /* misc flags */
250 int iv_initialized
; /* has IV been initialized already? */
254 uint32 hi
; /* upper 32 bits of IV */
255 uint16 lo
; /* lower 16 bits of IV */
258 struct ether_addr ea
; /* per station */
262 #define WSEC_MIN_PSK_LEN 8
263 #define WSEC_MAX_PSK_LEN 64
265 /* Flag for key material needing passhash'ing */
266 #define WSEC_PASSPHRASE (1<<0)
268 /* recepticle for WLC_SET_WSEC_PMK parameter */
270 ushort key_len
; /* octets in key material */
271 ushort flags
; /* key handling qualification */
272 uint8 key
[WSEC_MAX_PSK_LEN
]; /* PMK material */
275 /* wireless security bitvec */
276 #define WEP_ENABLED 1
277 #define TKIP_ENABLED 2
278 #define AES_ENABLED 4
279 #define WSEC_SWFLAG 8
281 #define WSEC_SW(wsec) ((wsec) & WSEC_SWFLAG)
282 #define WSEC_HW(wsec) (!WSEC_SW(wsec))
283 #define WSEC_WEP_ENABLED(wsec) ((wsec) & WEP_ENABLED)
284 #define WSEC_TKIP_ENABLED(wsec) ((wsec) & TKIP_ENABLED)
285 #define WSEC_AES_ENABLED(wsec) ((wsec) & AES_ENABLED)
286 #define WSEC_ENABLED(wsec) ((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
288 typedef struct wl_led_info
{
289 uint32 index
; /* led index */
295 * definitions for driver messages passed from WL to NAS.
297 /* Use this to recognize wpa and 802.1x driver messages. */
298 static const uint8 wl_wpa_snap_template
[] =
299 { 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
301 #define WL_WPA_MSG_IFNAME_MAX 16
303 /* WPA driver message */
304 typedef struct wl_wpa_header
{
305 struct ether_header eth
;
306 struct dot11_llc_snap_header snap
;
309 /* version 2 additions */
310 char ifname
[WL_WPA_MSG_IFNAME_MAX
];
311 /* version specific data */
313 } wl_wpa_header_t PACKED
;
315 #define WL_WPA_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
317 /* WPA driver message ethertype - private between wlc and nas */
318 #define WL_WPA_ETHER_TYPE 0x9999
320 /* WPA driver message current version */
321 #define WL_WPA_MSG_VERSION 2
323 /* Type field values for the 802.2 driver messages for WPA. */
324 #define WLC_ASSOC_MSG 1
325 #define WLC_DISASSOC_MSG 2
326 #define WLC_PTK_MIC_MSG 3
327 #define WLC_GTK_MIC_MSG 4
329 /* 802.1x driver message */
330 typedef struct wl_eapol_header
{
331 struct ether_header eth
;
332 struct dot11_llc_snap_header snap
;
335 char ifname
[WL_WPA_MSG_IFNAME_MAX
];
336 /* version specific data */
337 /* uint8 802_1x_msg[1]; */
338 } wl_eapol_header_t PACKED
;
340 #define WL_EAPOL_HEADER_LEN (ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
342 /* 802.1x driver message ethertype - private between wlc and nas */
343 #define WL_EAPOL_ETHER_TYPE 0x999A
345 /* 802.1x driver message current version */
346 #define WL_EAPOL_MSG_VERSION 1
348 /* srom read/write struct passed through ioctl */
350 uint byteoff
; /* byte offset */
351 uint nbytes
; /* number of bytes */
355 /* R_REG and W_REG struct passed through ioctl */
357 uint32 byteoff
; /* byte offset of the field in d11regs_t */
358 uint32 val
; /* read/write value of the field */
359 uint32 size
; /* sizeof the field */
362 /* Structure used by GET/SET_ATTEN ioctls */
364 uint16 auto_ctrl
; /* 1: Automatic control, 0: overriden */
365 uint16 bb
; /* Baseband attenuation */
366 uint16 radio
; /* Radio attenuation */
367 uint16 txctl1
; /* Radio TX_CTL1 value */
370 /* Used to get specific STA parameters */
373 struct ether_addr ea
;
376 /* Event data type */
378 uint msg
; /* Message (see below) */
379 struct ether_addr
*addr
; /* Station address (if applicable) */
380 uint status
; /* Status code (see below) */
381 uint reason
; /* Reason code (if applicable) */
382 uint auth_type
; /* WLC_E_AUTH */
383 bool link
; /* WLC_E_LINK */
384 bool group
; /* WLC_E_MIC_ERROR */
385 bool flush_txq
; /* WLC_E_MIC_ERROR */
389 uint16 ver
; /* version of this struct */
390 uint16 cap
; /* sta's advertized capabilities */
391 uint32 flags
; /* flags defined below */
392 uint32 idle
; /* time since data pkt rx'd from sta */
393 struct ether_addr ea
; /* Station address */
394 wl_rateset_t rateset
; /* rateset in use */
397 #define WL_STA_INFO_LEN 300
401 #define WL_STA_BRCM 0x01
402 #define WL_STA_WME 0x02
403 #define WL_STA_ABCAP 0x04
404 #define WL_STA_AUTHE 0x08
405 #define WL_STA_ASSOC 0x10
406 #define WL_STA_AUTHO 0x20
409 #define WLC_E_SET_SSID 1
411 #define WLC_E_START 3
413 #define WLC_E_AUTH_IND 5
414 #define WLC_E_DEAUTH 6
415 #define WLC_E_DEAUTH_IND 7
416 #define WLC_E_ASSOC 8
417 #define WLC_E_ASSOC_IND 9
418 #define WLC_E_REASSOC 10
419 #define WLC_E_REASSOC_IND 11
420 #define WLC_E_DISASSOC 12
421 #define WLC_E_DISASSOC_IND 13
422 #define WLC_E_QUIET_START 14 /* 802.11h Quiet period started */
423 #define WLC_E_QUIET_END 15 /* 802.11h Quiet period ended */
424 #define WLC_E_GOT_BEACONS 16
425 #define WLC_E_LINK 17 /* Link indication */
426 #define WLC_E_MIC_ERROR 18 /* TKIP MIC error occurred */
427 #define WLC_E_NDIS_LINK 19 /* NDIS style link indication */
428 #define WLC_E_ROAM 20
429 #define WLC_E_LAST 21
431 /* Event status codes */
432 #define WLC_E_STATUS_SUCCESS 0
433 #define WLC_E_STATUS_FAIL 1
434 #define WLC_E_STATUS_TIMEOUT 2
435 #define WLC_E_STATUS_NO_NETWORKS 3
436 #define WLC_E_STATUS_ABORT 4
438 typedef struct wlc_event_cb
{
439 uint msg
; /* Event message or 0 for all */
440 void (*fn
)(void *, wlc_event_t
*); /* Callback function */
441 void *context
; /* Passed to callback function */
442 struct wlc_event_cb
*next
; /* Next in the chain */
446 * Country locale determines which channels are available to us.
448 typedef enum _wlc_locale
{
449 WLC_WW
= 0, /* Worldwide */
450 WLC_THA
, /* Thailand */
451 WLC_ISR
, /* Israel */
452 WLC_JDN
, /* Jordan */
456 WLC_EUR
, /* Europe */
457 WLC_USL
, /* US Low Band only */
458 WLC_JPH
, /* Japan High Band only */
459 WLC_ALL
, /* All the channels in this band */
460 WLC_11D
, /* Represents locale recieved by 11d beacons */
462 WLC_UNDEFINED_LOCALE
= 0xf
465 /* channel encoding */
466 typedef struct channel_info
{
472 /* For ioctls that take a list of MAC addresses */
474 uint count
; /* number of MAC addresses */
475 struct ether_addr ea
[1]; /* variable length array of MAC addresses */
478 /* get pkt count struct passed through ioctl */
479 typedef struct get_pktcnt
{
486 /* Linux network driver ioctl encoding */
487 typedef struct wl_ioctl
{
488 uint cmd
; /* common ioctl definition */
489 void *buf
; /* pointer to user buffer */
490 uint len
; /* length of user buffer */
491 bool set
; /* get or set request (optional) */
492 uint used
; /* bytes read or written (optional) */
493 uint needed
; /* bytes needed (optional) */
497 * Structure for passing hardware and software
498 * revision info up from the driver.
500 typedef struct wlc_rev_info
{
501 uint vendorid
; /* PCI vendor id */
502 uint deviceid
; /* device id of chip */
503 uint radiorev
; /* radio revision */
504 uint chiprev
; /* chip revision */
505 uint corerev
; /* core revision */
506 uint boardid
; /* board identifier (usu. PCI sub-device id) */
507 uint boardvendor
; /* board vendor (usu. PCI sub-vendor id) */
508 uint boardrev
; /* board revision */
509 uint driverrev
; /* driver version */
510 uint ucoderev
; /* microcode version */
511 uint bus
; /* bus type */
512 uint chipnum
; /* chip number */
515 /* check this magic number */
516 #define WLC_IOCTL_MAGIC 0x14e46c77
518 /* bump this number if you change the ioctl interface */
519 #define WLC_IOCTL_VERSION 1
521 /* maximum length buffer required */
522 #define WLC_IOCTL_MAXLEN 8192
524 /* common ioctl definitions */
525 #define WLC_GET_MAGIC 0
526 #define WLC_GET_VERSION 1
530 #define WLC_GET_MSGLEVEL 7
531 #define WLC_SET_MSGLEVEL 8
532 #define WLC_GET_PROMISC 9
533 #define WLC_SET_PROMISC 10
534 #define WLC_GET_RATE 12
535 #define WLC_SET_RATE 13
536 #define WLC_GET_INSTANCE 14
537 #define WLC_GET_FRAG 15
538 #define WLC_SET_FRAG 16
539 #define WLC_GET_RTS 17
540 #define WLC_SET_RTS 18
541 #define WLC_GET_INFRA 19
542 #define WLC_SET_INFRA 20
543 #define WLC_GET_AUTH 21
544 #define WLC_SET_AUTH 22
545 #define WLC_GET_BSSID 23
546 #define WLC_SET_BSSID 24
547 #define WLC_GET_SSID 25
548 #define WLC_SET_SSID 26
549 #define WLC_RESTART 27
550 #define WLC_GET_CHANNEL 29
551 #define WLC_SET_CHANNEL 30
552 #define WLC_GET_SRL 31
553 #define WLC_SET_SRL 32
554 #define WLC_GET_LRL 33
555 #define WLC_SET_LRL 34
556 #define WLC_GET_PLCPHDR 35
557 #define WLC_SET_PLCPHDR 36
558 #define WLC_GET_RADIO 37
559 #define WLC_SET_RADIO 38
560 #define WLC_GET_PHYTYPE 39
561 #define WLC_GET_WEP 42
562 #define WLC_SET_WEP 43
563 #define WLC_GET_KEY 44
564 #define WLC_SET_KEY 45
565 #define WLC_GET_PASSIVE 48 /* added by nbd */
566 #define WLC_SET_PASSIVE 49 /* added by nbd */
568 #define WLC_SCAN_RESULTS 51
569 #define WLC_DISASSOC 52
570 #define WLC_REASSOC 53
571 #define WLC_GET_ROAM_TRIGGER 54
572 #define WLC_SET_ROAM_TRIGGER 55
573 #define WLC_GET_TXANT 61
574 #define WLC_SET_TXANT 62
575 #define WLC_GET_ANTDIV 63
576 #define WLC_SET_ANTDIV 64
577 #define WLC_GET_TXPWR 65
578 #define WLC_SET_TXPWR 66
579 #define WLC_GET_CLOSED 67
580 #define WLC_SET_CLOSED 68
581 #define WLC_GET_MACLIST 69
582 #define WLC_SET_MACLIST 70
583 #define WLC_GET_RATESET 71
584 #define WLC_SET_RATESET 72
585 #define WLC_GET_LOCALE 73
586 #define WLC_SET_LOCALE 74
587 #define WLC_GET_BCNPRD 75
588 #define WLC_SET_BCNPRD 76
589 #define WLC_GET_DTIMPRD 77
590 #define WLC_SET_DTIMPRD 78
591 #define WLC_GET_SROM 79
592 #define WLC_SET_SROM 80
593 #define WLC_GET_WEP_RESTRICT 81
594 #define WLC_SET_WEP_RESTRICT 82
595 #define WLC_GET_COUNTRY 83
596 #define WLC_SET_COUNTRY 84
597 #define WLC_GET_REVINFO 98
598 #define WLC_GET_MACMODE 105
599 #define WLC_SET_MACMODE 106
600 #define WLC_GET_MONITOR 107 /* added by nbd */
601 #define WLC_SET_MONITOR 108 /* added by nbd */
602 #define WLC_GET_GMODE 109
603 #define WLC_SET_GMODE 110
604 #define WLC_GET_CURR_RATESET 114 /* current rateset */
605 #define WLC_GET_SCANSUPPRESS 115
606 #define WLC_SET_SCANSUPPRESS 116
607 #define WLC_GET_AP 117
608 #define WLC_SET_AP 118
609 #define WLC_GET_EAP_RESTRICT 119
610 #define WLC_SET_EAP_RESTRICT 120
611 #define WLC_GET_WDSLIST 123
612 #define WLC_SET_WDSLIST 124
613 #define WLC_GET_RSSI 127
614 #define WLC_GET_WSEC 133
615 #define WLC_SET_WSEC 134
616 #define WLC_GET_BSS_INFO 136
617 #define WLC_GET_LAZYWDS 138
618 #define WLC_SET_LAZYWDS 139
619 #define WLC_GET_BANDLIST 140
620 #define WLC_GET_BAND 141
621 #define WLC_SET_BAND 142
622 #define WLC_GET_SHORTSLOT 144
623 #define WLC_GET_SHORTSLOT_OVERRIDE 145
624 #define WLC_SET_SHORTSLOT_OVERRIDE 146
625 #define WLC_GET_SHORTSLOT_RESTRICT 147
626 #define WLC_SET_SHORTSLOT_RESTRICT 148
627 #define WLC_GET_GMODE_PROTECTION 149
628 #define WLC_GET_GMODE_PROTECTION_OVERRIDE 150
629 #define WLC_SET_GMODE_PROTECTION_OVERRIDE 151
630 #define WLC_UPGRADE 152
631 #define WLC_GET_MRATE 153
632 #define WLC_SET_MRATE 154
633 #define WLC_GET_ASSOCLIST 159
634 #define WLC_GET_CLK 160
635 #define WLC_SET_CLK 161
636 #define WLC_GET_UP 162
638 #define WLC_GET_WPA_AUTH 164
639 #define WLC_SET_WPA_AUTH 165
640 #define WLC_GET_GMODE_PROTECTION_CONTROL 178
641 #define WLC_SET_GMODE_PROTECTION_CONTROL 179
642 #define WLC_GET_PHYLIST 180
643 #define WLC_GET_KEY_SEQ 183
644 #define WLC_GET_GMODE_PROTECTION_CTS 198
645 #define WLC_SET_GMODE_PROTECTION_CTS 199
646 #define WLC_GET_PIOMODE 203
647 #define WLC_SET_PIOMODE 204
648 #define WLC_SET_LED 209
649 #define WLC_GET_LED 210
650 #define WLC_GET_CHANNEL_SEL 215
651 #define WLC_START_CHANNEL_SEL 216
652 #define WLC_GET_VALID_CHANNELS 217
653 #define WLC_GET_FAKEFRAG 218
654 #define WLC_SET_FAKEFRAG 219
655 #define WLC_GET_WET 230
656 #define WLC_SET_WET 231
657 #define WLC_GET_KEY_PRIMARY 235
658 #define WLC_SET_KEY_PRIMARY 236
659 #define WLC_WDS_GET_REMOTE_HWADDR 246 /* currently handled in wl_linux.c/wl_vx.c */
660 #define WLC_SET_CS_SCAN_TIMER 248
661 #define WLC_GET_CS_SCAN_TIMER 249
662 #define WLC_CURRENT_PWR 256
663 #define WLC_GET_CHANNELS_IN_COUNTRY 260
664 #define WLC_GET_COUNTRY_LIST 261
665 #define WLC_GET_VAR 262 /* get value of named variable */
666 #define WLC_SET_VAR 263 /* set named variable to value */
667 #define WLC_NVRAM_GET 264
668 #define WLC_NVRAM_SET 265
669 #define WLC_SET_WSEC_PMK 268
670 #define WLC_GET_AUTH_MODE 269
671 #define WLC_SET_AUTH_MODE 270
672 #define WLC_LAST 273 /* do not change - use get_var/set_var */
675 * Minor kludge alert:
676 * Duplicate a few definitions that irelay requires from epiioctl.h here
677 * so caller doesn't have to include this file and epiioctl.h .
678 * If this grows any more, it would be time to move these irelay-specific
679 * definitions out of the epiioctl.h and into a separate driver common file.
681 #ifndef EPICTRL_COOKIE
682 #define EPICTRL_COOKIE 0xABADCEDE
685 /* vx wlc ioctl's offset */
686 #define CMN_IOCTL_OFF 0x180
691 * 0xFF - implementation specific OID
692 * 0xE4 - first byte of Broadcom PCI vendor ID
693 * 0x14 - second byte of Broadcom PCI vendor ID
694 * 0xXX - the custom OID number
697 /* begin 0x1f values beyond the start of the ET driver range. */
698 #define WL_OID_BASE 0xFFE41420
701 #define OID_WL_GETINSTANCE (WL_OID_BASE + WLC_GET_INSTANCE)
703 #define WL_DECRYPT_STATUS_SUCCESS 1
704 #define WL_DECRYPT_STATUS_FAILURE 2
705 #define WL_DECRYPT_STATUS_UNKNOWN 3
707 /* allows user-mode app to poll the status of USB image upgrade */
708 #define WLC_UPGRADE_SUCCESS 0
709 #define WLC_UPGRADE_PENDING 1
711 /* Bit masks for radio disabled status - returned by WL_GET_RADIO */
712 #define WL_RADIO_SW_DISABLE (1<<0)
713 #define WL_RADIO_HW_DISABLE (1<<1)
715 /* Override bit for WLC_SET_TXPWR. if set, ignore other level limits */
716 #define WL_TXPWR_OVERRIDE (1<<31)
720 #define WL_SB_BUS 0 /* Silicon Backplane */
721 #define WL_PCI_BUS 1 /* PCI target */
722 #define WL_PCMCIA_BUS 2 /* PCMCIA target */
725 #define WLC_BAND_AUTO 0 /* auto-select */
726 #define WLC_BAND_A 1 /* "a" band (5 Ghz) */
727 #define WLC_BAND_B 2 /* "b" band (2.4 Ghz) */
730 #define WLC_MACMODE_DISABLED 0 /* MAC list disabled */
731 #define WLC_MACMODE_DENY 1 /* Deny specified (i.e. allow unspecified) */
732 #define WLC_MACMODE_ALLOW 2 /* Allow specified (i.e. deny unspecified) */
737 #define GMODE_LEGACY_B 0
740 #define GMODE_B_DEFERRED 3
741 #define GMODE_PERFORMANCE 4
745 /* values for PLCPHdr_override */
746 #define WLC_PLCP_AUTO -1
747 #define WLC_PLCP_SHORT 0
748 #define WLC_PLCP_LONG 1
750 /* values for g_protection_override */
751 #define WLC_G_PROTECTION_AUTO -1
752 #define WLC_G_PROTECTION_OFF 0
753 #define WLC_G_PROTECTION_ON 1
755 /* values for g_protection_control */
756 #define WLC_G_PROTECTION_CTL_OFF 0
757 #define WLC_G_PROTECTION_CTL_LOCAL 1
758 #define WLC_G_PROTECTION_CTL_OVERLAP 2
769 /* 802.11h enforcement levels */
770 #define SPECT_MNGMT_OFF 0 /* 11h disabled */
771 #define SPECT_MNGMT_LOOSE 1 /* Allow scan lists to contain non-11h AP */
772 /* when 11h is enabled */
773 #define SPECT_MNGMT_STRICT 2 /* Prine out non-11h APs from scan list */
777 /* max # of leds supported by GPIO (gpio pin# == led index#) */
778 #define WL_LED_NUMGPIO 16 /* gpio 0-15 */
780 /* led per-pin behaviors */
781 #define WL_LED_OFF 0 /* always off */
782 #define WL_LED_ON 1 /* always on */
783 #define WL_LED_ACTIVITY 2 /* activity */
784 #define WL_LED_RADIO 3 /* radio enabled */
785 #define WL_LED_ARADIO 4 /* 5 Ghz radio enabled */
786 #define WL_LED_BRADIO 5 /* 2.4Ghz radio enabled */
787 #define WL_LED_BGMODE 6 /* on if gmode, off if bmode */
791 #define WL_LED_ASSOC 10 /* associated state indicator */
792 #define WL_LED_INACTIVE 11 /* null behavior (clears default behavior) */
793 #define WL_LED_NUMBEHAVIOR 12
795 /* led behavior numeric value format */
796 #define WL_LED_BEH_MASK 0x7f /* behavior mask */
797 #define WL_LED_AL_MASK 0x80 /* activelow (polarity) bit */
800 /* WDS link local endpoint WPA role */
801 #define WL_WDS_WPA_ROLE_AUTH 0 /* authenticator */
802 #define WL_WDS_WPA_ROLE_SUP 1 /* supplicant */
803 #define WL_WDS_WPA_ROLE_AUTO 255 /* auto, based on mac addr value */
805 /* afterburner_override */
806 #define ABO_AUTO -1 /* auto - no override */
807 #define ABO_OFF 0 /* force afterburner off */
808 #define ABO_ON 1 /* force afterburner on */
812 #endif /* _wlioctl_h_ */