ar71xx: add AR933x specific early_printk support
[openwrt.git] / target / linux / ixp4xx / patches-2.6.32 / 304-ixp4xx_eth_jumboframe.patch
1 --- a/drivers/net/arm/ixp4xx_eth.c
2 +++ b/drivers/net/arm/ixp4xx_eth.c
3 @@ -52,7 +52,7 @@
4
5 #define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
6 #define REGS_SIZE 0x1000
7 -#define MAX_MRU 1536 /* 0x600 */
8 +#define MAX_MRU (14320 - ETH_HLEN - ETH_FCS_LEN)
9 #define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
10
11 #define NAPI_WEIGHT 16
12 @@ -1061,6 +1061,32 @@ static void destroy_queues(struct port *
13 }
14 }
15
16 +static int eth_do_change_mtu(struct net_device *dev, int mtu)
17 +{
18 + struct port *port;
19 + struct msg msg;
20 + /* adjust for ethernet headers */
21 + int framesize = mtu + ETH_HLEN + ETH_FCS_LEN;
22 +
23 + port = netdev_priv(dev);
24 +
25 + memset(&msg, 0, sizeof(msg));
26 + msg.cmd = NPE_SETMAXFRAMELENGTHS;
27 + msg.eth_id = port->id;
28 +
29 + /* max rx/tx 64 byte blocks */
30 + msg.byte2 = ((framesize + 63) / 64) << 8;
31 + msg.byte3 = ((framesize + 63) / 64) << 8;
32 +
33 + msg.byte4 = msg.byte6 = framesize >> 8;
34 + msg.byte5 = msg.byte7 = framesize & 0xff;
35 +
36 + if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAX_FRAME_LENGTH"))
37 + return -EIO;
38 +
39 + return 0;
40 +}
41 +
42 static int eth_open(struct net_device *dev)
43 {
44 struct port *port = netdev_priv(dev);
45 @@ -1112,6 +1138,8 @@ static int eth_open(struct net_device *d
46 if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
47 return -EIO;
48
49 + eth_do_change_mtu(dev, dev->mtu);
50 +
51 if ((err = request_queues(port)) != 0)
52 return err;
53
54 @@ -1251,7 +1279,26 @@ static int eth_close(struct net_device *
55 return 0;
56 }
57
58 +static int ixp_eth_change_mtu(struct net_device *dev, int mtu)
59 +{
60 + int ret;
61 +
62 + if (mtu > MAX_MRU)
63 + return -EINVAL;
64 +
65 + if (dev->flags & IFF_UP) {
66 + ret = eth_do_change_mtu(dev, mtu);
67 + if (ret < 0)
68 + return ret;
69 + }
70 +
71 + dev->mtu = mtu;
72 +
73 + return 0;
74 +}
75 +
76 static const struct net_device_ops ixp4xx_netdev_ops = {
77 + .ndo_change_mtu = ixp_eth_change_mtu,
78 .ndo_open = eth_open,
79 .ndo_stop = eth_close,
80 .ndo_start_xmit = eth_xmit,
This page took 0.041933 seconds and 5 git commands to generate.