projects / openwrt.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
history | raw | HEAD
ar71xx: add sysupgrade support for Ubiquiti XM boards
[openwrt.git] / target / linux / ppc40x / patches / 005-openrb.patch
1 --- /dev/null
2 +++ b/arch/powerpc/boot/cuboot-openrb.c
3 @@ -0,0 +1,71 @@
4 +/*
5 + * Old U-boot compatibility for OpenRB boards
6 + *
7 + * Author: Gabor Juhos <juhosg@openwrt.org>
8 + * Imre Kaloz <kaloz@openwrt.org>
9 + *
10 + * This program is free software; you can redistribute it and/or modify it
11 + * under the terms of the GNU General Public License version 2 as published
12 + * by the Free Software Foundation.
13 + */
14 +
15 +#include "ops.h"
16 +#include "io.h"
17 +#include "dcr.h"
18 +#include "stdio.h"
19 +#include "4xx.h"
20 +#include "44x.h"
21 +#include "cuboot.h"
22 +
23 +#define TARGET_4xx
24 +#define TARGET_405EP
25 +#include "ppcboot.h"
26 +
27 +static bd_t bd;
28 +
29 +static void fixup_cf_card(void)
30 +{
31 +#define DCRN_CPC0_PCI_BASE 0xf9
32 +#define CF_CS0_BASE 0xff100000
33 +#define CF_CS1_BASE 0xff200000
34 +
35 + /* Turn on PerWE instead of PCIsomething */
36 + mtdcr(DCRN_CPC0_PCI_BASE,
37 + mfdcr(DCRN_CPC0_PCI_BASE) | (0x80000000L >> 27));
38 +
39 + /* PerCS1 (CF's CS0): base 0xff100000, 16-bit, rw */
40 + mtdcr(DCRN_EBC0_CFGADDR, EBC_B1CR);
41 + mtdcr(DCRN_EBC0_CFGDATA, CF_CS0_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
42 + mtdcr(DCRN_EBC0_CFGADDR, EBC_B1AP);
43 + mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
44 +
45 + /* PerCS2 (CF's CS1): base 0xff200000, 16-bit, rw */
46 + mtdcr(DCRN_EBC0_CFGADDR, EBC_B2CR);
47 + mtdcr(DCRN_EBC0_CFGDATA, CF_CS1_BASE | EBC_BXCR_BU_RW | EBC_BXCR_BW_16);
48 + mtdcr(DCRN_EBC0_CFGADDR, EBC_B2AP);
49 + mtdcr(DCRN_EBC0_CFGDATA, 0x080bd800);
50 +
51 +#undef DCRN_CPC0_PCI_BASE
52 +#undef CF_CS0_BASE
53 +#undef CF_CS1_BASE
54 +}
55 +
56 +static void openrb_fixups(void)
57 +{
58 + ibm405ep_fixup_clocks(bd.bi_procfreq / 8);
59 + ibm4xx_sdram_fixup_memsize();
60 +
61 + fixup_cf_card();
62 +
63 + dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr);
64 +}
65 +
66 +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
67 + unsigned long r6, unsigned long r7)
68 +{
69 + CUBOOT_INIT();
70 + platform_ops.fixups = openrb_fixups;
71 + platform_ops.exit = ibm40x_dbcr_reset;
72 + fdt_init(_dtb_start);
73 + serial_console_init();
74 +}
75 --- /dev/null
76 +++ b/arch/powerpc/boot/dts/openrb.dts
77 @@ -0,0 +1,276 @@
78 +/*
79 + * Device Tree Source for OpenRB boards
80 + *
81 + * Copyright 2009 Gabor Juhos <juhosg@openwrt.org>
82 + * Copyright 2009 Imre Kaloz <kaloz@openwrt.org>
83 + *
84 + * Based on walnut.dts
85 + *
86 + * This file is licensed under the terms of the GNU General Public
87 + * License version 2. This program is licensed "as is" without
88 + * any warranty of any kind, whether express or implied.
89 + */
90 +
91 +/dts-v1/;
92 +
93 +/ {
94 + #address-cells = <1>;
95 + #size-cells = <1>;
96 + model = "openrb";
97 + compatible = "openrb";
98 + dcr-parent = <&{/cpus/cpu@0}>;
99 +
100 + aliases {
101 + ethernet0 = &EMAC0;
102 + ethernet1 = &EMAC1;
103 + serial0 = &UART0;
104 + serial1 = &UART1;
105 + };
106 +
107 + cpus {
108 + #address-cells = <1>;
109 + #size-cells = <0>;
110 +
111 + cpu@0 {
112 + device_type = "cpu";
113 + model = "PowerPC,405EP";
114 + reg = <0x00000000>;
115 + clock-frequency = <0>; /* Filled in by zImage */
116 + timebase-frequency = <0>; /* Filled in by zImage */
117 + i-cache-line-size = <0x20>;
118 + d-cache-line-size = <0x20>;
119 + i-cache-size = <0x4000>;
120 + d-cache-size = <0x4000>;
121 + dcr-controller;
122 + dcr-access-method = "native";
123 + };
124 + };
125 +
126 + memory {
127 + device_type = "memory";
128 + reg = <0x00000000 0x00000000>; /* Filled in by zImage */
129 + };
130 +
131 + UIC0: interrupt-controller {
132 + compatible = "ibm,uic";
133 + interrupt-controller;
134 + cell-index = <0>;
135 + dcr-reg = <0x0c0 0x009>;
136 + #address-cells = <0>;
137 + #size-cells = <0>;
138 + #interrupt-cells = <2>;
139 + };
140 +
141 + plb {
142 + compatible = "ibm,plb3";
143 + #address-cells = <1>;
144 + #size-cells = <1>;
145 + ranges;
146 + clock-frequency = <0>; /* Filled in by zImage */
147 +
148 + SDRAM0: memory-controller {
149 + compatible = "ibm,sdram-405ep";
150 + dcr-reg = <0x010 0x002>;
151 + };
152 +
153 + MAL: mcmal {
154 + compatible = "ibm,mcmal-405ep", "ibm,mcmal";
155 + dcr-reg = <0x180 0x062>;
156 + num-tx-chans = <4>;
157 + num-rx-chans = <2>;
158 + interrupt-parent = <&UIC0>;
159 + interrupts = <
160 + 0xb 0x4 /* TXEOB */
161 + 0xc 0x4 /* RXEOB */
162 + 0xa 0x4 /* SERR */
163 + 0xd 0x4 /* TXDE */
164 + 0xe 0x4 /* RXDE */>;
165 + };
166 +
167 + POB0: opb {
168 + compatible = "ibm,opb-405ep", "ibm,opb";
169 + #address-cells = <1>;
170 + #size-cells = <1>;
171 + ranges = <0xef600000 0xef600000 0x00a00000>;
172 + dcr-reg = <0x0a0 0x005>;
173 + clock-frequency = <0>; /* Filled in by zImage */
174 +
175 + UART0: serial@ef600300 {
176 + device_type = "serial";
177 + compatible = "ns16550";
178 + reg = <0xef600300 0x00000008>;
179 + virtual-reg = <0xef600300>;
180 + clock-frequency = <0>; /* Filled in by zImage */
181 + current-speed = <115200>;
182 + interrupt-parent = <&UIC0>;
183 + interrupts = <0x0 0x4>;
184 + };
185 +
186 + UART1: serial@ef600400 {
187 + device_type = "serial";
188 + compatible = "ns16550";
189 + reg = <0xef600400 0x00000008>;
190 + virtual-reg = <0xef600400>;
191 + clock-frequency = <0>; /* Filled in by zImage */
192 + current-speed = <115200>;
193 + interrupt-parent = <&UIC0>;
194 + interrupts = <0x1 0x4>;
195 + };
196 +
197 + IIC: i2c@ef600500 {
198 + compatible = "ibm,iic-405ep", "ibm,iic";
199 + #address-cells = <1>;
200 + #size-cells = <0>;
201 + reg = <0xef600500 0x00000011>;
202 + interrupt-parent = <&UIC0>;
203 + interrupts = <0x2 0x4>;
204 +
205 + eeprom@50 {
206 + compatible = "at24,24c16";
207 + reg = <0x50>;
208 + };
209 + };
210 +
211 + GPIO0: gpio-controller@ef600700 {
212 + compatible = "ibm,ppc4xx-gpio";
213 + reg = <0xef600700 0x00000020>;
214 + #gpio-cells = <2>;
215 + gpio-controller;
216 + };
217 +
218 + EMAC0: ethernet@ef600800 {
219 + linux,network-index = <0x0>;
220 + device_type = "network";
221 + compatible = "ibm,emac-405ep", "ibm,emac";
222 + interrupt-parent = <&UIC0>;
223 + interrupts = <
224 + 0xf 0x4 /* Ethernet */
225 + 0x9 0x4 /* Ethernet Wake Up */>;
226 + local-mac-address = [000000000000]; /* Filled in by zImage */
227 + reg = <0xef600800 0x00000070>;
228 + mal-device = <&MAL>;
229 + mal-tx-channel = <0>;
230 + mal-rx-channel = <0>;
231 + cell-index = <0>;
232 + max-frame-size = <0x5dc>;
233 + rx-fifo-size = <0x1000>;
234 + tx-fifo-size = <0x800>;
235 + phy-mode = "mii";
236 + phy-map = <0x00000000>;
237 + };
238 +
239 + EMAC1: ethernet@ef600900 {
240 + linux,network-index = <0x1>;
241 + device_type = "network";
242 + compatible = "ibm,emac-405ep", "ibm,emac";
243 + interrupt-parent = <&UIC0>;
244 + interrupts = <
245 + 0x11 0x4 /* Ethernet */
246 + 0x09 0x4 /* Ethernet Wake Up */>;
247 + local-mac-address = [000000000000]; /* Filled in by zImage */
248 + reg = <0xef600900 0x00000070>;
249 + mal-device = <&MAL>;
250 + mal-tx-channel = <2>;
251 + mal-rx-channel = <1>;
252 + cell-index = <1>;
253 + max-frame-size = <0x5dc>;
254 + rx-fifo-size = <0x1000>;
255 + tx-fifo-size = <0x800>;
256 + mdio-device = <&EMAC0>;
257 + phy-mode = "mii";
258 + phy-map = <0x00000001>;
259 + };
260 +
261 + leds {
262 + compatible = "gpio-leds";
263 + user {
264 + label = "openrb:green:user";
265 + gpios = <&GPIO0 2 1>;
266 + };
267 + };
268 + };
269 +
270 + EBC0: ebc {
271 + compatible = "ibm,ebc-405ep", "ibm,ebc";
272 + dcr-reg = <0x012 0x002>;
273 + #address-cells = <2>;
274 + #size-cells = <1>;
275 + /* The ranges property is supplied by the bootwrapper
276 + * and is based on the firmware's configuration of the
277 + * EBC bridge
278 + */
279 + clock-frequency = <0>; /* Filled in by zImage */
280 +
281 + cf_card@ff100000 {
282 + compatible = "magicbox-cf", "pata-magicbox-cf";
283 + reg = <0x00000000 0xff100000 0x00001000
284 + 0x00000000 0xff200000 0x00001000>;
285 + interrupt-parent = <&UIC0>;
286 + interrupts = <0x19 0x1 /* IRQ_TYPE_EDGE_RISING */ >;
287 + };
288 +
289 + nor_flash@ff800000 {
290 + compatible = "cfi-flash";
291 + bank-width = <2>;
292 + reg = <0x00000000 0xff800000 0x00800000>;
293 + #address-cells = <1>;
294 + #size-cells = <1>;
295 + partition@0 {
296 + label = "linux";
297 + reg = <0x0 0x120000>;
298 + };
299 + partition@120000 {
300 + label = "rootfs";
301 + reg = <0x120000 0x6a0000>;
302 + };
303 + partition@7c0000 {
304 + label = "u-boot";
305 + reg = <0x7c0000 0x30000>;
306 + read-only;
307 + };
308 + };
309 + };
310 +
311 + PCI0: pci@ec000000 {
312 + device_type = "pci";
313 + #interrupt-cells = <1>;
314 + #size-cells = <2>;
315 + #address-cells = <3>;
316 + compatible = "ibm,plb405ep-pci", "ibm,plb-pci";
317 + primary;
318 + reg = <0xeec00000 0x00000008 /* Config space access */
319 + 0xeed80000 0x00000004 /* IACK */
320 + 0xeed80000 0x00000004 /* Special cycle */
321 + 0xef480000 0x00000040>; /* Internal registers */
322 +
323 + /* Outbound ranges, one memory and one IO,
324 + * later cannot be changed. Chip supports a second
325 + * IO range but we don't use it for now
326 + */
327 + ranges = <0x02000000 0x00000000 0x80000000 0x80000000 0x00000000 0x20000000
328 + 0x01000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
329 +
330 + /* Inbound 2GB range starting at 0 */
331 + dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
332 +
333 + interrupt-map-mask = <0xf800 0x0 0x0 0x0>;
334 + interrupt-map = <
335 + /* IDSEL 1 */
336 + 0x800 0x0 0x0 0x0 &UIC0 0x1c 0x8
337 +
338 + /* IDSEL 2 */
339 + 0x1000 0x0 0x0 0x0 &UIC0 0x1d 0x8
340 +
341 + /* IDSEL 3 */
342 + 0x1800 0x0 0x0 0x0 &UIC0 0x1e 0x8
343 +
344 + /* IDSEL 4 */
345 + 0x2000 0x0 0x0 0x0 &UIC0 0x1f 0x8
346 + >;
347 + };
348 + };
349 +
350 + chosen {
351 + linux,stdout-path = "/plb/opb/serial@ef600300";
352 + };
353 +};
354 --- a/arch/powerpc/boot/Makefile
355 +++ b/arch/powerpc/boot/Makefile
356 @@ -43,6 +43,7 @@ $(obj)/cuboot-taishan.o: BOOTCFLAGS += -
357 $(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440
358 $(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405
359 $(obj)/cuboot-magicbox.o: BOOTCFLAGS += -mcpu=405
360 +$(obj)/cuboot-openrb.o: BOOTCFLAGS += -mcpu=405
361 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405
362 $(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405
363
364 @@ -76,7 +77,8 @@ src-plat := of.c cuboot-52xx.c cuboot-82
365 cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
366 cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
367 virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
368 - cuboot-acadia.c cuboot-amigaone.c cuboot-magicbox.c
369 + cuboot-acadia.c cuboot-amigaone.c cuboot-magicbox.c \
370 + cuboot-openrb.c
371 src-boot := $(src-wlib) $(src-plat) empty.c
372
373 src-boot := $(addprefix $(obj)/, $(src-boot))
374 @@ -194,6 +196,7 @@ image-$(CONFIG_EP405) += dtbImage.ep40
375 image-$(CONFIG_WALNUT) += treeImage.walnut
376 image-$(CONFIG_ACADIA) += cuImage.acadia
377 image-$(CONFIG_MAGICBOX) += cuImage.magicbox
378 +image-$(CONFIG_OPENRB) += cuImage.openrb
379
380 # Board ports in arch/powerpc/platform/44x/Kconfig
381 image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony
382 --- a/arch/powerpc/platforms/40x/Kconfig
383 +++ b/arch/powerpc/platforms/40x/Kconfig
384 @@ -60,6 +60,16 @@ config MAGICBOX
385 help
386 This option enables support for the Magicbox boards.
387
388 +config OPENRB
389 + bool "OpenRB"
390 + depends on 40x
391 + default n
392 + select PPC40x_SIMPLE
393 + select 405EP
394 + select PCI
395 + help
396 + This option enables support for the OpenRB boards.
397 +
398 config MAKALU
399 bool "Makalu"
400 depends on 40x
401 --- a/arch/powerpc/platforms/40x/ppc40x_simple.c
402 +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c
403 @@ -55,7 +55,8 @@ static char *board[] __initdata = {
404 "amcc,haleakala",
405 "amcc,kilauea",
406 "amcc,makalu",
407 - "magicbox"
408 + "magicbox",
409 + "openrb"
410 };
411
412 static int __init ppc40x_probe(void)
Personal OpenWRT clone
This page took 0.077598 seconds and 5 git commands to generate.