target/linux/at91/patches-2.6.21/015-simenable.patch

   1 Index: linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
   2 ===================================================================
   3 --- linux-2.6.21.7.orig/arch/arm/mach-at91/board-vlink.c
   4 +++ linux-2.6.21.7/arch/arm/mach-at91/board-vlink.c
   5 @@ -150,32 +150,38 @@ static void __init vlink_board_init(void
   6         /* LEDs */
   7  //     at91_gpio_leds(vlink_leds, ARRAY_SIZE(vlink_leds));
   8
   9 -/* Other LED's */
  10 -       at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1
  11 -       at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1
  12 -       at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
  13 -       at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
  14 -       at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
  15 -       at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
  16 -
  17 -/* SIM Cards */
  18 -       at91_set_gpio_output(AT91_PIN_PB9, 1);  // ENBSC3
  19 -       at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
  20 -       at91_set_gpio_output(AT91_PIN_PB11, 1); // ENBSC1
  21 -
  22 -/* GSM Module Control */
  23 -       at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
  24 -
  25 -/* Test jig presence detection */
  26 -       at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
  27 -
  28 -/* Power indicator */
  29 -       at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
  30 -
  31 -/* USB Device control */
  32 -       at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
  33 -       at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
  34 -                        at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
  35 +       /* Other LED's */
  36 +       at91_set_gpio_output(AT91_PIN_PC7, 1);  // LED FRONT AP1
  37 +       at91_set_gpio_output(AT91_PIN_PC8, 1);  // LED FRONT BP1
  38 +       at91_set_gpio_output(AT91_PIN_PB14, 1); // LED BACK AP1
  39 +       at91_set_gpio_output(AT91_PIN_PB15, 1); // LED BACK BP1
  40 +       at91_set_gpio_output(AT91_PIN_PB16, 1); // LED BACK AP2
  41 +       at91_set_gpio_output(AT91_PIN_PB17, 1); // LED BACK BP2
  42 +
  43 +       /* Test jig presence detection */
  44 +       at91_set_gpio_input(AT91_PIN_PB8, 1);   // JIGPRESENT
  45 +
  46 +       /* SIM Cards */
  47 +       if (at91_get_gpio_value(AT91_PIN_PB8)) {
  48 +               at91_set_gpio_output(AT91_PIN_PB11, 0);
  49 +               at91_set_gpio_output(AT91_PIN_PB9, 1);
  50 +       } else {
  51 +               at91_set_gpio_output(AT91_PIN_PB11, 1);
  52 +               at91_set_gpio_output(AT91_PIN_PB9, 0);
  53 +       }
  54 +
  55 +       at91_set_gpio_output(AT91_PIN_PB10, 1); // ENBSC2
  56 +
  57 +       /* GSM Module Control */
  58 +       at91_set_gpio_output(AT91_PIN_PB12, 1); // GSMONOFF
  59 +
  60 +       /* Power indicator */
  61 +       at91_set_gpio_input(AT91_PIN_PB22, 1);  // PWR_IND
  62 +
  63 +       /* USB Device control */
  64 +       at91_set_gpio_input(AT91_PIN_PB27, 1);  // UDB_CNX
  65 +       at91_set_gpio_output(AT91_PIN_PB28, 1); // UDB_PUP
  66 +       at91_set_multi_drive(AT91_PIN_PB28, 1); // Set to multi-drive
  67
  68  }
  69