target/linux/ixp4xx/patches-2.6.24/180-tw5334_support.patch

   1 diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/Kconfig linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Kconfig
   2 --- linux-2.6.24.2/arch/arm/mach-ixp4xx/Kconfig 2008-04-09 01:34:46.000000000 +0200
   3 +++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Kconfig    2008-04-09 00:06:48.000000000 +0200
   4 @@ -150,6 +150,14 @@
   5           PrPCM1100 Processor Mezanine Module. For more information on
   6           this platform, see <file:Documentation/arm/IXP4xx>.
   7
   8 +config MACH_TW5334
   9 +       bool "Titan Wireless TW-533-4"
  10 +       select PCI
  11 +       help
  12 +         Say 'Y' here if you want your kernel to support the Titan
  13 +         Wireless TW533-4. For more information on this platform,
  14 +         see http://openwrt.org
  15 +
  16  config MACH_NAS100D
  17         bool
  18         prompt "NAS100D"
  19 diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/Makefile linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Makefile
  20 --- linux-2.6.24.2/arch/arm/mach-ixp4xx/Makefile        2008-04-09 01:34:46.000000000 +0200
  21 +++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/Makefile   2008-04-09 00:07:45.000000000 +0200
  22 @@ -22,6 +22,7 @@
  23  obj-pci-$(CONFIG_MACH_WRT300NV2)               += wrt300nv2-pci.o
  24  obj-pci-$(CONFIG_MACH_SIDEWINDER)              += sidewinder-pci.o
  25  obj-pci-$(CONFIG_MACH_AP1000)          += ixdp425-pci.o
  26 +obj-pci-$(CONFIG_MACH_TW5334)          += tw5334-pci.o
  27
  28  obj-y  += common.o
  29
  30 @@ -42,6 +43,7 @@
  31  obj-$(CONFIG_MACH_WRT300NV2)   += wrt300nv2-setup.o
  32  obj-$(CONFIG_MACH_SIDEWINDER)  += sidewinder-setup.o
  33  obj-$(CONFIG_MACH_AP1000)      += ap1000-setup.o
  34 +obj-$(CONFIG_MACH_TW5334)      += tw5334-setup.o
  35
  36  obj-$(CONFIG_PCI)              += $(obj-pci-$(CONFIG_PCI)) common-pci.o
  37  obj-$(CONFIG_IXP4XX_QMGR)      += ixp4xx_qmgr.o
  38 diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-setup.c linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-setup.c
  39 --- linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-setup.c  1970-01-01 01:00:00.000000000 +0100
  40 +++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-setup.c     2008-04-09 01:58:52.000000000 +0200
  41 @@ -0,0 +1,162 @@
  42 +/*
  43 + * arch/arm/mach-ixp4xx/tw5334-setup.c
  44 + *
  45 + * Board setup for the Titan Wireless TW-533-4
  46 + *
  47 + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
  48 + *
  49 + * based on coyote-setup.c:
  50 + *      Copyright (C) 2003-2005 MontaVista Software, Inc.
  51 + *
  52 + * Author: Imre Kaloz <Kaloz@openwrt.org>
  53 + */
  54 +
  55 +#include <linux/if_ether.h>
  56 +#include <linux/kernel.h>
  57 +#include <linux/init.h>
  58 +#include <linux/device.h>
  59 +#include <linux/serial.h>
  60 +#include <linux/tty.h>
  61 +#include <linux/serial_8250.h>
  62 +#include <linux/slab.h>
  63 +
  64 +#include <asm/types.h>
  65 +#include <asm/setup.h>
  66 +#include <asm/memory.h>
  67 +#include <asm/hardware.h>
  68 +#include <asm/irq.h>
  69 +#include <asm/mach-types.h>
  70 +#include <asm/mach/arch.h>
  71 +#include <asm/mach/flash.h>
  72 +
  73 +static struct flash_platform_data tw5334_flash_data = {
  74 +       .map_name       = "cfi_probe",
  75 +       .width          = 2,
  76 +};
  77 +
  78 +static struct resource tw5334_flash_resource = {
  79 +       .flags          = IORESOURCE_MEM,
  80 +};
  81 +
  82 +static struct platform_device tw5334_flash = {
  83 +       .name           = "IXP4XX-Flash",
  84 +       .id             = 0,
  85 +       .dev            = {
  86 +               .platform_data = &tw5334_flash_data,
  87 +       },
  88 +       .num_resources  = 1,
  89 +       .resource       = &tw5334_flash_resource,
  90 +};
  91 +
  92 +static struct resource tw5334_uart_resource = {
  93 +       .start  = IXP4XX_UART2_BASE_PHYS,
  94 +       .end    = IXP4XX_UART2_BASE_PHYS + 0x0fff,
  95 +       .flags  = IORESOURCE_MEM,
  96 +};
  97 +
  98 +static struct plat_serial8250_port tw5334_uart_data[] = {
  99 +       {
 100 +               .mapbase        = IXP4XX_UART2_BASE_PHYS,
 101 +               .membase        = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
 102 +               .irq            = IRQ_IXP4XX_UART2,
 103 +               .flags          = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
 104 +               .iotype         = UPIO_MEM,
 105 +               .regshift       = 2,
 106 +               .uartclk        = IXP4XX_UART_XTAL,
 107 +       },
 108 +       { },
 109 +};
 110 +
 111 +static struct platform_device tw5334_uart = {
 112 +       .name           = "serial8250",
 113 +       .id             = PLAT8250_DEV_PLATFORM,
 114 +       .dev                    = {
 115 +               .platform_data  = tw5334_uart_data,
 116 +       },
 117 +       .num_resources  = 1,
 118 +       .resource       = &tw5334_uart_resource,
 119 +};
 120 +
 121 +/* Built-in 10/100 Ethernet MAC interfaces */
 122 +static struct eth_plat_info tw5334_plat_eth[] = {
 123 +        {
 124 +                .phy            = 0,
 125 +                .rxq            = 3,
 126 +               .txreadyq       = 20,
 127 +        }, {
 128 +                .phy            = 1,
 129 +                .rxq            = 4,
 130 +               .txreadyq       = 21,
 131 +       }
 132 +};
 133 +
 134 +static struct platform_device tw5334_eth[] = {
 135 +        {
 136 +                .name                   = "ixp4xx_eth",
 137 +                .id                     = IXP4XX_ETH_NPEB,
 138 +                .dev.platform_data      = tw5334_plat_eth,
 139 +        }, {
 140 +                .name                   = "ixp4xx_eth",
 141 +                .id                     = IXP4XX_ETH_NPEC,
 142 +                .dev.platform_data      = tw5334_plat_eth + 1,
 143 +       }
 144 +};
 145 +
 146 +static struct platform_device *tw5334_devices[] __initdata = {
 147 +       &tw5334_flash,
 148 +       &tw5334_uart,
 149 +       &tw5334_eth[0],
 150 +       &tw5334_eth[1],
 151 +};
 152 +
 153 +static void __init tw5334_init(void)
 154 +{
 155 +       DECLARE_MAC_BUF(mac_buf);
 156 +       uint8_t __iomem *f;
 157 +       int i;
 158 +
 159 +       ixp4xx_sys_init();
 160 +
 161 +       tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
 162 +       tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
 163 +
 164 +       *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
 165 +       *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
 166 +
 167 +       platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
 168 +
 169 +       /*
 170 +        * Map in a portion of the flash and read the MAC addresses.
 171 +        * Since it is stored in BE in the flash itself, we need to
 172 +        * byteswap it if we're in LE mode.
 173 +        */
 174 +       f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
 175 +       if (f) {
 176 +               for (i = 0; i < 6; i++)
 177 +#ifdef __ARMEB__
 178 +               tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
 179 +               tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
 180 +#else
 181 +               tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
 182 +               tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
 183 +#endif
 184 +               iounmap(f);
 185 +       }
 186 +       printk(KERN_INFO "TW-533-4: Using MAC address %s for port 0\n",
 187 +               print_mac(mac_buf, tw5334_plat_eth[0].hwaddr));
 188 +       printk(KERN_INFO "TW-533-4: Using MAC address %s for port 1\n",
 189 +               print_mac(mac_buf, tw5334_plat_eth[1].hwaddr));
 190 +}
 191 +
 192 +#ifdef CONFIG_MACH_TW5334
 193 +MACHINE_START(TW5334, "Titan Wireless TW-533-4")
 194 +       /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
 195 +       .phys_io        = IXP4XX_PERIPHERAL_BASE_PHYS,
 196 +       .io_pg_offst    = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
 197 +       .map_io         = ixp4xx_map_io,
 198 +       .init_irq       = ixp4xx_init_irq,
 199 +       .timer          = &ixp4xx_timer,
 200 +       .boot_params    = 0x0100,
 201 +       .init_machine   = tw5334_init,
 202 +MACHINE_END
 203 +#endif
 204 diff -Nur linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-pci.c linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-pci.c
 205 --- linux-2.6.24.2/arch/arm/mach-ixp4xx/tw5334-pci.c    1970-01-01 01:00:00.000000000 +0100
 206 +++ linux-2.6.24.2-owrt/arch/arm/mach-ixp4xx/tw5334-pci.c       2008-04-09 00:35:32.000000000 +0200
 207 @@ -0,0 +1,69 @@
 208 +/*
 209 + * arch/arch/mach-ixp4xx/tw5334-pci.c
 210 + *
 211 + * PCI setup routines for the Titan Wireless TW-533-4
 212 + *
 213 + * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
 214 + *
 215 + * based on coyote-pci.c:
 216 + *     Copyright (C) 2002 Jungo Software Technologies.
 217 + *     Copyright (C) 2003 MontaVista Softwrae, Inc.
 218 + *
 219 + * Maintainer: Imre Kaloz <kaloz@openwrt.org>
 220 + *
 221 + * This program is free software; you can redistribute it and/or modify
 222 + * it under the terms of the GNU General Public License version 2 as
 223 + * published by the Free Software Foundation.
 224 + *
 225 + */
 226 +
 227 +#include <linux/kernel.h>
 228 +#include <linux/pci.h>
 229 +#include <linux/init.h>
 230 +#include <linux/irq.h>
 231 +
 232 +#include <asm/mach-types.h>
 233 +#include <asm/hardware.h>
 234 +
 235 +#include <asm/mach/pci.h>
 236 +
 237 +void __init tw5334_pci_preinit(void)
 238 +{
 239 +       set_irq_type(IRQ_IXP4XX_GPIO6, IRQT_LOW);
 240 +       set_irq_type(IRQ_IXP4XX_GPIO2, IRQT_LOW);
 241 +       set_irq_type(IRQ_IXP4XX_GPIO1, IRQT_LOW);
 242 +       set_irq_type(IRQ_IXP4XX_GPIO0, IRQT_LOW);
 243 +
 244 +       ixp4xx_pci_preinit();
 245 +}
 246 +
 247 +static int __init tw5334_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 248 +{
 249 +       if (slot == 12)
 250 +               return IRQ_IXP4XX_GPIO6;
 251 +       else if (slot == 13)
 252 +               return IRQ_IXP4XX_GPIO2;
 253 +       else if (slot == 14)
 254 +               return IRQ_IXP4XX_GPIO1;
 255 +       else if (slot == 15)
 256 +               return IRQ_IXP4XX_GPIO0;
 257 +       else return -1;
 258 +}
 259 +
 260 +struct hw_pci tw5334_pci __initdata = {
 261 +       .nr_controllers = 1,
 262 +       .preinit =        tw5334_pci_preinit,
 263 +       .swizzle =        pci_std_swizzle,
 264 +       .setup =          ixp4xx_setup,
 265 +       .scan =           ixp4xx_scan_bus,
 266 +       .map_irq =        tw5334_map_irq,
 267 +};
 268 +
 269 +int __init tw5334_pci_init(void)
 270 +{
 271 +       if (machine_is_tw5334())
 272 +               pci_common_init(&tw5334_pci);
 273 +       return 0;
 274 +}
 275 +
 276 +subsys_initcall(tw5334_pci_init);
 277 --- linux-2.6.24.2/include/asm-arm/arch-ixp4xx/uncompress.h     2008-04-07 08:59:19.000000000 +0200
 278 +++ linux-2.6.24.2-owrt/include/asm-arm/arch-ixp4xx/uncompress.h        2008-04-09 13:22:42.000000000 +0200
 279 @@ -42,7 +42,8 @@
 280          */
 281         if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
 282                          machine_is_gateway7001() || machine_is_wg302v2() ||
 283 -                        machine_is_pronghorn_metro() || machine_is_wrt300nv2())
 284 +                        machine_is_pronghorn_metro() || machine_is_wrt300nv2() ||
 285 +                        machine_is_tw5334())
 286                 uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
 287         else
 288                 uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;