[adm5120] improve support of the Infineon EASY 5120-RT Reference Board
[openwrt.git] / target / linux / brcm47xx / patches-2.6.25 / 690-mips-allow-pciregister-after-boot.patch
1 Allow registering PCI devices after early boot.
2
3 This is an ugly hack and needs to be rewritten before going upstream.
4 Index: linux-2.6.23.16/arch/mips/pci/pci.c
5 ===================================================================
6 --- linux-2.6.23.16.orig/arch/mips/pci/pci.c 2008-02-20 16:06:36.000000000 +0100
7 +++ linux-2.6.23.16/arch/mips/pci/pci.c 2008-02-20 16:09:33.000000000 +0100
8 @@ -21,6 +21,17 @@
9 */
10 int pci_probe_only;
11
12 +/*
13 + * Indicate whether PCI-bios init was already done.
14 + */
15 +static int pcibios_init_done;
16 +
17 +/*
18 + * The currently used busnumber.
19 + */
20 +static int next_busno;
21 +static int need_domain_info;
22 +
23 #define PCI_ASSIGN_ALL_BUSSES 1
24
25 unsigned int pci_probe = PCI_ASSIGN_ALL_BUSSES;
26 @@ -75,8 +86,32 @@ pcibios_align_resource(void *data, struc
27 res->start = start;
28 }
29
30 -void __devinit register_pci_controller(struct pci_controller *hose)
31 +/* Most MIPS systems have straight-forward swizzling needs. */
32 +
33 +static inline u8 bridge_swizzle(u8 pin, u8 slot)
34 +{
35 + return (((pin - 1) + slot) % 4) + 1;
36 +}
37 +
38 +static u8 common_swizzle(struct pci_dev *dev, u8 *pinp)
39 {
40 + u8 pin = *pinp;
41 +
42 + while (dev->bus->parent) {
43 + pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
44 + /* Move up the chain of bridges. */
45 + dev = dev->bus->self;
46 + }
47 + *pinp = pin;
48 +
49 + /* The slot is the slot of the last bridge. */
50 + return PCI_SLOT(dev->devfn);
51 +}
52 +
53 +void register_pci_controller(struct pci_controller *hose)
54 +{
55 + struct pci_bus *bus;
56 +
57 if (request_resource(&iomem_resource, hose->mem_resource) < 0)
58 goto out;
59 if (request_resource(&ioport_resource, hose->io_resource) < 0) {
60 @@ -84,9 +119,6 @@ void __devinit register_pci_controller(s
61 goto out;
62 }
63
64 - *hose_tail = hose;
65 - hose_tail = &hose->next;
66 -
67 /*
68 * Do not panic here but later - this might hapen before console init.
69 */
70 @@ -94,41 +126,47 @@ void __devinit register_pci_controller(s
71 printk(KERN_WARNING
72 "registering PCI controller with io_map_base unset\n");
73 }
74 - return;
75
76 -out:
77 - printk(KERN_WARNING
78 - "Skipping PCI bus scan due to resource conflict\n");
79 -}
80 + if (pcibios_init_done) {
81 + //TODO
82
83 -/* Most MIPS systems have straight-forward swizzling needs. */
84 + printk(KERN_INFO "Registering a PCI bus after boot\n");
85
86 -static inline u8 bridge_swizzle(u8 pin, u8 slot)
87 -{
88 - return (((pin - 1) + slot) % 4) + 1;
89 -}
90 + if (!hose->iommu)
91 + PCI_DMA_BUS_IS_PHYS = 1;
92
93 -static u8 __init common_swizzle(struct pci_dev *dev, u8 *pinp)
94 -{
95 - u8 pin = *pinp;
96 + bus = pci_scan_bus(next_busno, hose->pci_ops, hose);
97 + hose->bus = bus;
98 + need_domain_info = need_domain_info || hose->index;
99 + hose->need_domain_info = need_domain_info;
100 + if (bus) {
101 + next_busno = bus->subordinate + 1;
102 + /* Don't allow 8-bit bus number overflow inside the hose -
103 + reserve some space for bridges. */
104 + if (next_busno > 224) {
105 + next_busno = 0;
106 + need_domain_info = 1;
107 + }
108 + }
109 + if (!pci_probe_only)
110 + pci_assign_unassigned_resources();
111 + pci_fixup_irqs(common_swizzle, pcibios_map_irq);
112 + } else {
113 + *hose_tail = hose;
114 + hose_tail = &hose->next;
115 + }
116
117 - while (dev->bus->parent) {
118 - pin = bridge_swizzle(pin, PCI_SLOT(dev->devfn));
119 - /* Move up the chain of bridges. */
120 - dev = dev->bus->self;
121 - }
122 - *pinp = pin;
123 + return;
124
125 - /* The slot is the slot of the last bridge. */
126 - return PCI_SLOT(dev->devfn);
127 +out:
128 + printk(KERN_WARNING
129 + "Skipping PCI bus scan due to resource conflict\n");
130 }
131
132 static int __init pcibios_init(void)
133 {
134 struct pci_controller *hose;
135 struct pci_bus *bus;
136 - int next_busno;
137 - int need_domain_info = 0;
138
139 /* Scan all of the recorded PCI controllers. */
140 for (next_busno = 0, hose = hose_head; hose; hose = hose->next) {
141 @@ -157,6 +195,7 @@ static int __init pcibios_init(void)
142 if (!pci_probe_only)
143 pci_assign_unassigned_resources();
144 pci_fixup_irqs(common_swizzle, pcibios_map_irq);
145 + pcibios_init_done = 1;
146
147 return 0;
148 }
149 Index: linux-2.6.23.16/drivers/ssb/main.c
150 ===================================================================
151 --- linux-2.6.23.16.orig/drivers/ssb/main.c 2008-02-20 16:06:36.000000000 +0100
152 +++ linux-2.6.23.16/drivers/ssb/main.c 2008-02-20 18:33:21.000000000 +0100
153 @@ -1185,9 +1185,7 @@ static int __init ssb_modinit(void)
154 /* ssb must be initialized after PCI but before the ssb drivers.
155 * That means we must use some initcall between subsys_initcall
156 * and device_initcall. */
157 -//FIXME on embedded we need to be early to make sure we can register
158 -// a new PCI bus, if needed.
159 -subsys_initcall(ssb_modinit);
160 +fs_initcall(ssb_modinit);
161
162 static void __exit ssb_modexit(void)
163 {
This page took 0.053584 seconds and 5 git commands to generate.