2 * ar8216.c: AR8216 switch driver
4 * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
6 * This program is free software; you can redistribute it and/or
7 * modify it under the terms of the GNU General Public License
8 * as published by the Free Software Foundation; either version 2
9 * of the License, or (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
18 #include <linux/module.h>
19 #include <linux/init.h>
20 #include <linux/list.h>
21 #include <linux/if_ether.h>
22 #include <linux/skbuff.h>
23 #include <linux/netdevice.h>
24 #include <linux/netlink.h>
25 #include <linux/bitops.h>
26 #include <net/genetlink.h>
27 #include <linux/switch.h>
28 #include <linux/delay.h>
29 #include <linux/phy.h>
30 #include <linux/netdevice.h>
31 #include <linux/etherdevice.h>
32 #include <linux/lockdep.h>
35 /* size of the vlan table */
36 #define AR8X16_MAX_VLANS 128
37 #define AR8X16_PROBE_RETRIES 10
40 struct switch_dev dev
;
41 struct phy_device
*phy
;
42 u32 (*read
)(struct ar8216_priv
*priv
, int reg
);
43 void (*write
)(struct ar8216_priv
*priv
, int reg
, u32 val
);
44 const struct net_device_ops
*ndo_old
;
45 struct net_device_ops ndo
;
46 struct mutex reg_mutex
;
54 /* all fields below are cleared on reset */
56 u16 vlan_id
[AR8X16_MAX_VLANS
];
57 u8 vlan_table
[AR8X16_MAX_VLANS
];
59 u16 pvid
[AR8216_NUM_PORTS
];
62 #define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev)
65 split_addr(u32 regaddr
, u16
*r1
, u16
*r2
, u16
*page
)
74 *page
= regaddr
& 0x1ff;
78 ar8216_mii_read(struct ar8216_priv
*priv
, int reg
)
80 struct phy_device
*phy
= priv
->phy
;
81 struct mii_bus
*bus
= phy
->bus
;
85 split_addr((u32
) reg
, &r1
, &r2
, &page
);
87 mutex_lock(&bus
->mdio_lock
);
89 bus
->write(bus
, 0x18, 0, page
);
90 usleep_range(1000, 2000); /* wait for the page switch to propagate */
91 lo
= bus
->read(bus
, 0x10 | r2
, r1
);
92 hi
= bus
->read(bus
, 0x10 | r2
, r1
+ 1);
94 mutex_unlock(&bus
->mdio_lock
);
96 return (hi
<< 16) | lo
;
100 ar8216_mii_write(struct ar8216_priv
*priv
, int reg
, u32 val
)
102 struct phy_device
*phy
= priv
->phy
;
103 struct mii_bus
*bus
= phy
->bus
;
107 split_addr((u32
) reg
, &r1
, &r2
, &r3
);
109 hi
= (u16
) (val
>> 16);
111 mutex_lock(&bus
->mdio_lock
);
113 bus
->write(bus
, 0x18, 0, r3
);
114 usleep_range(1000, 2000); /* wait for the page switch to propagate */
115 bus
->write(bus
, 0x10 | r2
, r1
+ 1, hi
);
116 bus
->write(bus
, 0x10 | r2
, r1
, lo
);
118 mutex_unlock(&bus
->mdio_lock
);
122 ar8216_phy_dbg_write(struct ar8216_priv
*priv
, int phy_addr
,
123 u16 dbg_addr
, u16 dbg_data
)
125 struct mii_bus
*bus
= priv
->phy
->bus
;
127 mutex_lock(&bus
->mdio_lock
);
128 bus
->write(bus
, phy_addr
, MII_ATH_DBG_ADDR
, dbg_addr
);
129 bus
->write(bus
, phy_addr
, MII_ATH_DBG_DATA
, dbg_data
);
130 mutex_unlock(&bus
->mdio_lock
);
134 ar8216_rmw(struct ar8216_priv
*priv
, int reg
, u32 mask
, u32 val
)
138 lockdep_assert_held(&priv
->reg_mutex
);
140 v
= priv
->read(priv
, reg
);
143 priv
->write(priv
, reg
, v
);
149 ar8216_id_chip(struct ar8216_priv
*priv
)
155 priv
->chip
= UNKNOWN
;
157 val
= ar8216_mii_read(priv
, AR8216_REG_CTRL
);
161 id
= val
& (AR8216_CTRL_REVISION
| AR8216_CTRL_VERSION
);
162 for (i
= 0; i
< AR8X16_PROBE_RETRIES
; i
++) {
165 val
= ar8216_mii_read(priv
, AR8216_REG_CTRL
);
169 t
= val
& (AR8216_CTRL_REVISION
| AR8216_CTRL_VERSION
);
187 "ar8216: Unknown Atheros device [ver=%d, rev=%d, phy_id=%04x%04x]\n",
188 (int)(id
>> AR8216_CTRL_VERSION_S
),
189 (int)(id
& AR8216_CTRL_REVISION
),
190 mdiobus_read(priv
->phy
->bus
, priv
->phy
->addr
, 2),
191 mdiobus_read(priv
->phy
->bus
, priv
->phy
->addr
, 3));
200 ar8216_read_port_link(struct ar8216_priv
*priv
, int port
,
201 struct switch_port_link
*link
)
206 memset(link
, '\0', sizeof(*link
));
208 status
= priv
->read(priv
, AR8216_REG_PORT_STATUS(port
));
210 link
->aneg
= !!(status
& AR8216_PORT_STATUS_LINK_AUTO
);
212 link
->link
= !!(status
& AR8216_PORT_STATUS_LINK_UP
);
219 link
->duplex
= !!(status
& AR8216_PORT_STATUS_DUPLEX
);
220 link
->tx_flow
= !!(status
& AR8216_PORT_STATUS_TXFLOW
);
221 link
->rx_flow
= !!(status
& AR8216_PORT_STATUS_RXFLOW
);
223 speed
= (status
& AR8216_PORT_STATUS_SPEED
) >>
224 AR8216_PORT_STATUS_SPEED_S
;
227 case AR8216_PORT_SPEED_10M
:
228 link
->speed
= SWITCH_PORT_SPEED_10
;
230 case AR8216_PORT_SPEED_100M
:
231 link
->speed
= SWITCH_PORT_SPEED_100
;
233 case AR8216_PORT_SPEED_1000M
:
234 link
->speed
= SWITCH_PORT_SPEED_1000
;
237 link
->speed
= SWITCH_PORT_SPEED_UNKNOWN
;
243 ar8216_set_vlan(struct switch_dev
*dev
, const struct switch_attr
*attr
,
244 struct switch_val
*val
)
246 struct ar8216_priv
*priv
= to_ar8216(dev
);
247 priv
->vlan
= !!val
->value
.i
;
252 ar8216_get_vlan(struct switch_dev
*dev
, const struct switch_attr
*attr
,
253 struct switch_val
*val
)
255 struct ar8216_priv
*priv
= to_ar8216(dev
);
256 val
->value
.i
= priv
->vlan
;
262 ar8216_set_pvid(struct switch_dev
*dev
, int port
, int vlan
)
264 struct ar8216_priv
*priv
= to_ar8216(dev
);
266 /* make sure no invalid PVIDs get set */
268 if (vlan
>= dev
->vlans
)
271 priv
->pvid
[port
] = vlan
;
276 ar8216_get_pvid(struct switch_dev
*dev
, int port
, int *vlan
)
278 struct ar8216_priv
*priv
= to_ar8216(dev
);
279 *vlan
= priv
->pvid
[port
];
284 ar8216_set_vid(struct switch_dev
*dev
, const struct switch_attr
*attr
,
285 struct switch_val
*val
)
287 struct ar8216_priv
*priv
= to_ar8216(dev
);
288 priv
->vlan_id
[val
->port_vlan
] = val
->value
.i
;
293 ar8216_get_vid(struct switch_dev
*dev
, const struct switch_attr
*attr
,
294 struct switch_val
*val
)
296 struct ar8216_priv
*priv
= to_ar8216(dev
);
297 val
->value
.i
= priv
->vlan_id
[val
->port_vlan
];
302 ar8216_get_port_link(struct switch_dev
*dev
, int port
,
303 struct switch_port_link
*link
)
305 struct ar8216_priv
*priv
= to_ar8216(dev
);
307 ar8216_read_port_link(priv
, port
, link
);
312 ar8216_mangle_tx(struct sk_buff
*skb
, struct net_device
*dev
)
314 struct ar8216_priv
*priv
= dev
->phy_ptr
;
323 if (unlikely(skb_headroom(skb
) < 2)) {
324 if (pskb_expand_head(skb
, 2, 0, GFP_ATOMIC
) < 0)
328 buf
= skb_push(skb
, 2);
333 return priv
->ndo_old
->ndo_start_xmit(skb
, dev
);
336 dev_kfree_skb_any(skb
);
341 ar8216_mangle_rx(struct sk_buff
*skb
, int napi
)
343 struct ar8216_priv
*priv
;
344 struct net_device
*dev
;
356 /* don't strip the header if vlan mode is disabled */
360 /* strip header, get vlan id */
364 /* check for vlan header presence */
365 if ((buf
[12 + 2] != 0x81) || (buf
[13 + 2] != 0x00))
370 /* no need to fix up packets coming from a tagged source */
371 if (priv
->vlan_tagged
& (1 << port
))
374 /* lookup port vid from local table, the switch passes an invalid vlan id */
375 vlan
= priv
->vlan_id
[priv
->pvid
[port
]];
378 buf
[14 + 2] |= vlan
>> 8;
379 buf
[15 + 2] = vlan
& 0xff;
382 skb
->protocol
= eth_type_trans(skb
, skb
->dev
);
385 return netif_receive_skb(skb
);
387 return netif_rx(skb
);
390 /* no vlan? eat the packet! */
391 dev_kfree_skb_any(skb
);
396 ar8216_netif_rx(struct sk_buff
*skb
)
398 return ar8216_mangle_rx(skb
, 0);
402 ar8216_netif_receive_skb(struct sk_buff
*skb
)
404 return ar8216_mangle_rx(skb
, 1);
408 static struct switch_attr ar8216_globals
[] = {
410 .type
= SWITCH_TYPE_INT
,
411 .name
= "enable_vlan",
412 .description
= "Enable VLAN mode",
413 .set
= ar8216_set_vlan
,
414 .get
= ar8216_get_vlan
,
419 static struct switch_attr ar8216_port
[] = {
422 static struct switch_attr ar8216_vlan
[] = {
424 .type
= SWITCH_TYPE_INT
,
426 .description
= "VLAN ID (0-4094)",
427 .set
= ar8216_set_vid
,
428 .get
= ar8216_get_vid
,
435 ar8216_get_ports(struct switch_dev
*dev
, struct switch_val
*val
)
437 struct ar8216_priv
*priv
= to_ar8216(dev
);
438 u8 ports
= priv
->vlan_table
[val
->port_vlan
];
442 for (i
= 0; i
< AR8216_NUM_PORTS
; i
++) {
443 struct switch_port
*p
;
445 if (!(ports
& (1 << i
)))
448 p
= &val
->value
.ports
[val
->len
++];
450 if (priv
->vlan_tagged
& (1 << i
))
451 p
->flags
= (1 << SWITCH_PORT_FLAG_TAGGED
);
459 ar8216_set_ports(struct switch_dev
*dev
, struct switch_val
*val
)
461 struct ar8216_priv
*priv
= to_ar8216(dev
);
462 u8
*vt
= &priv
->vlan_table
[val
->port_vlan
];
466 for (i
= 0; i
< val
->len
; i
++) {
467 struct switch_port
*p
= &val
->value
.ports
[i
];
469 if (p
->flags
& (1 << SWITCH_PORT_FLAG_TAGGED
)) {
470 priv
->vlan_tagged
|= (1 << p
->id
);
472 priv
->vlan_tagged
&= ~(1 << p
->id
);
473 priv
->pvid
[p
->id
] = val
->port_vlan
;
475 /* make sure that an untagged port does not
476 * appear in other vlans */
477 for (j
= 0; j
< AR8X16_MAX_VLANS
; j
++) {
478 if (j
== val
->port_vlan
)
480 priv
->vlan_table
[j
] &= ~(1 << p
->id
);
490 ar8216_wait_bit(struct ar8216_priv
*priv
, int reg
, u32 mask
, u32 val
)
496 t
= priv
->read(priv
, reg
);
497 if ((t
& mask
) == val
)
506 pr_err("ar8216: timeout on reg %08x: %08x & %08x != %08x\n",
507 (unsigned int) reg
, t
, mask
, val
);
512 ar8216_vtu_op(struct ar8216_priv
*priv
, u32 op
, u32 val
)
514 if (ar8216_wait_bit(priv
, AR8216_REG_VTU
, AR8216_VTU_ACTIVE
, 0))
516 if ((op
& AR8216_VTU_OP
) == AR8216_VTU_OP_LOAD
) {
517 val
&= AR8216_VTUDATA_MEMBER
;
518 val
|= AR8216_VTUDATA_VALID
;
519 priv
->write(priv
, AR8216_REG_VTU_DATA
, val
);
521 op
|= AR8216_VTU_ACTIVE
;
522 priv
->write(priv
, AR8216_REG_VTU
, op
);
526 ar8216_setup_port(struct ar8216_priv
*priv
, int port
, u32 egress
, u32 ingress
,
527 u32 members
, u32 pvid
)
531 if (priv
->vlan
&& port
== AR8216_PORT_CPU
&& priv
->chip
== AR8216
)
532 header
= AR8216_PORT_CTRL_HEADER
;
536 ar8216_rmw(priv
, AR8216_REG_PORT_CTRL(port
),
537 AR8216_PORT_CTRL_LEARN
| AR8216_PORT_CTRL_VLAN_MODE
|
538 AR8216_PORT_CTRL_SINGLE_VLAN
| AR8216_PORT_CTRL_STATE
|
539 AR8216_PORT_CTRL_HEADER
| AR8216_PORT_CTRL_LEARN_LOCK
,
540 AR8216_PORT_CTRL_LEARN
| header
|
541 (egress
<< AR8216_PORT_CTRL_VLAN_MODE_S
) |
542 (AR8216_PORT_STATE_FORWARD
<< AR8216_PORT_CTRL_STATE_S
));
544 ar8216_rmw(priv
, AR8216_REG_PORT_VLAN(port
),
545 AR8216_PORT_VLAN_DEST_PORTS
| AR8216_PORT_VLAN_MODE
|
546 AR8216_PORT_VLAN_DEFAULT_ID
,
547 (members
<< AR8216_PORT_VLAN_DEST_PORTS_S
) |
548 (ingress
<< AR8216_PORT_VLAN_MODE_S
) |
549 (pvid
<< AR8216_PORT_VLAN_DEFAULT_ID_S
));
553 ar8236_setup_port(struct ar8216_priv
*priv
, int port
, u32 egress
, u32 ingress
,
554 u32 members
, u32 pvid
)
556 ar8216_rmw(priv
, AR8216_REG_PORT_CTRL(port
),
557 AR8216_PORT_CTRL_LEARN
| AR8216_PORT_CTRL_VLAN_MODE
|
558 AR8216_PORT_CTRL_SINGLE_VLAN
| AR8216_PORT_CTRL_STATE
|
559 AR8216_PORT_CTRL_HEADER
| AR8216_PORT_CTRL_LEARN_LOCK
,
560 AR8216_PORT_CTRL_LEARN
|
561 (egress
<< AR8216_PORT_CTRL_VLAN_MODE_S
) |
562 (AR8216_PORT_STATE_FORWARD
<< AR8216_PORT_CTRL_STATE_S
));
564 ar8216_rmw(priv
, AR8236_REG_PORT_VLAN(port
),
565 AR8236_PORT_VLAN_DEFAULT_ID
,
566 (pvid
<< AR8236_PORT_VLAN_DEFAULT_ID_S
));
568 ar8216_rmw(priv
, AR8236_REG_PORT_VLAN2(port
),
569 AR8236_PORT_VLAN2_VLAN_MODE
|
570 AR8236_PORT_VLAN2_MEMBER
,
571 (ingress
<< AR8236_PORT_VLAN2_VLAN_MODE_S
) |
572 (members
<< AR8236_PORT_VLAN2_MEMBER_S
));
576 ar8216_hw_apply(struct switch_dev
*dev
)
578 struct ar8216_priv
*priv
= to_ar8216(dev
);
579 u8 portmask
[AR8216_NUM_PORTS
];
582 mutex_lock(&priv
->reg_mutex
);
583 /* flush all vlan translation unit entries */
584 ar8216_vtu_op(priv
, AR8216_VTU_OP_FLUSH
, 0);
586 memset(portmask
, 0, sizeof(portmask
));
588 /* calculate the port destination masks and load vlans
589 * into the vlan translation unit */
590 for (j
= 0; j
< AR8X16_MAX_VLANS
; j
++) {
591 u8 vp
= priv
->vlan_table
[j
];
596 for (i
= 0; i
< AR8216_NUM_PORTS
; i
++) {
599 portmask
[i
] |= vp
& ~mask
;
604 (priv
->vlan_id
[j
] << AR8216_VTU_VID_S
),
605 priv
->vlan_table
[j
]);
609 * isolate all ports, but connect them to the cpu port */
610 for (i
= 0; i
< AR8216_NUM_PORTS
; i
++) {
611 if (i
== AR8216_PORT_CPU
)
614 portmask
[i
] = 1 << AR8216_PORT_CPU
;
615 portmask
[AR8216_PORT_CPU
] |= (1 << i
);
619 /* update the port destination mask registers and tag settings */
620 for (i
= 0; i
< AR8216_NUM_PORTS
; i
++) {
625 pvid
= priv
->vlan_id
[priv
->pvid
[i
]];
626 if (priv
->vlan_tagged
& (1 << i
))
627 egress
= AR8216_OUT_ADD_VLAN
;
629 egress
= AR8216_OUT_STRIP_VLAN
;
630 ingress
= AR8216_IN_SECURE
;
633 egress
= AR8216_OUT_KEEP
;
634 ingress
= AR8216_IN_PORT_ONLY
;
637 if (priv
->chip
== AR8236
)
638 ar8236_setup_port(priv
, i
, egress
, ingress
, portmask
[i
],
641 ar8216_setup_port(priv
, i
, egress
, ingress
, portmask
[i
],
644 mutex_unlock(&priv
->reg_mutex
);
649 ar8216_hw_init(struct ar8216_priv
*priv
)
655 ar8236_hw_init(struct ar8216_priv
*priv
)
660 if (priv
->initialized
)
663 /* Initialize the PHYs */
664 bus
= priv
->phy
->bus
;
665 for (i
= 0; i
< 5; i
++) {
666 mdiobus_write(bus
, i
, MII_ADVERTISE
,
667 ADVERTISE_ALL
| ADVERTISE_PAUSE_CAP
|
668 ADVERTISE_PAUSE_ASYM
);
669 mdiobus_write(bus
, i
, MII_BMCR
, BMCR_RESET
| BMCR_ANENABLE
);
673 priv
->initialized
= true;
678 ar8316_hw_init(struct ar8216_priv
*priv
)
684 val
= priv
->read(priv
, 0x8);
686 if (priv
->phy
->interface
== PHY_INTERFACE_MODE_RGMII
) {
687 if (priv
->port4_phy
) {
688 /* value taken from Ubiquiti RouterStation Pro */
690 printk(KERN_INFO
"ar8316: Using port 4 as PHY\n");
693 printk(KERN_INFO
"ar8316: Using port 4 as switch port\n");
695 } else if (priv
->phy
->interface
== PHY_INTERFACE_MODE_GMII
) {
696 /* value taken from AVM Fritz!Box 7390 sources */
699 /* no known value for phy interface */
700 printk(KERN_ERR
"ar8316: unsupported mii mode: %d.\n",
701 priv
->phy
->interface
);
708 priv
->write(priv
, 0x8, newval
);
710 /* Initialize the ports */
711 bus
= priv
->phy
->bus
;
712 for (i
= 0; i
< 5; i
++) {
713 if ((i
== 4) && priv
->port4_phy
&&
714 priv
->phy
->interface
== PHY_INTERFACE_MODE_RGMII
) {
715 /* work around for phy4 rgmii mode */
716 ar8216_phy_dbg_write(priv
, i
, 0x12, 0x480c);
718 ar8216_phy_dbg_write(priv
, i
, 0x0, 0x824e);
720 ar8216_phy_dbg_write(priv
, i
, 0x5, 0x3d47);
724 /* initialize the port itself */
725 mdiobus_write(bus
, i
, MII_ADVERTISE
,
726 ADVERTISE_ALL
| ADVERTISE_PAUSE_CAP
| ADVERTISE_PAUSE_ASYM
);
727 mdiobus_write(bus
, i
, MII_CTRL1000
, ADVERTISE_1000FULL
);
728 mdiobus_write(bus
, i
, MII_BMCR
, BMCR_RESET
| BMCR_ANENABLE
);
733 priv
->initialized
= true;
738 ar8216_init_globals(struct ar8216_priv
*priv
)
740 switch (priv
->chip
) {
742 /* standard atheros magic */
743 priv
->write(priv
, 0x38, 0xc000050e);
745 ar8216_rmw(priv
, AR8216_REG_GLOBAL_CTRL
,
746 AR8216_GCTRL_MTU
, 1518 + 8 + 2);
749 /* standard atheros magic */
750 priv
->write(priv
, 0x38, 0xc000050e);
752 /* enable cpu port to receive multicast and broadcast frames */
753 priv
->write(priv
, AR8216_REG_FLOOD_MASK
, 0x003f003f);
757 /* enable jumbo frames */
758 ar8216_rmw(priv
, AR8216_REG_GLOBAL_CTRL
,
759 AR8316_GCTRL_MTU
, 9018 + 8 + 2);
765 ar8216_init_port(struct ar8216_priv
*priv
, int port
)
767 /* Enable port learning and tx */
768 priv
->write(priv
, AR8216_REG_PORT_CTRL(port
),
769 AR8216_PORT_CTRL_LEARN
|
770 (4 << AR8216_PORT_CTRL_STATE_S
));
772 priv
->write(priv
, AR8216_REG_PORT_VLAN(port
), 0);
774 if (port
== AR8216_PORT_CPU
) {
775 priv
->write(priv
, AR8216_REG_PORT_STATUS(port
),
776 AR8216_PORT_STATUS_LINK_UP
|
777 ((priv
->chip
== AR8316
) ?
778 AR8216_PORT_SPEED_1000M
: AR8216_PORT_SPEED_100M
) |
779 AR8216_PORT_STATUS_TXMAC
|
780 AR8216_PORT_STATUS_RXMAC
|
781 ((priv
->chip
== AR8316
) ? AR8216_PORT_STATUS_RXFLOW
: 0) |
782 ((priv
->chip
== AR8316
) ? AR8216_PORT_STATUS_TXFLOW
: 0) |
783 AR8216_PORT_STATUS_DUPLEX
);
785 priv
->write(priv
, AR8216_REG_PORT_STATUS(port
),
786 AR8216_PORT_STATUS_LINK_AUTO
);
791 ar8216_reset_switch(struct switch_dev
*dev
)
793 struct ar8216_priv
*priv
= to_ar8216(dev
);
796 mutex_lock(&priv
->reg_mutex
);
797 memset(&priv
->vlan
, 0, sizeof(struct ar8216_priv
) -
798 offsetof(struct ar8216_priv
, vlan
));
800 for (i
= 0; i
< AR8X16_MAX_VLANS
; i
++)
801 priv
->vlan_id
[i
] = i
;
803 /* Configure all ports */
804 for (i
= 0; i
< AR8216_NUM_PORTS
; i
++)
805 ar8216_init_port(priv
, i
);
807 ar8216_init_globals(priv
);
808 mutex_unlock(&priv
->reg_mutex
);
810 return ar8216_hw_apply(dev
);
814 static const struct switch_dev_ops ar8216_sw_ops
= {
816 .attr
= ar8216_globals
,
817 .n_attr
= ARRAY_SIZE(ar8216_globals
),
821 .n_attr
= ARRAY_SIZE(ar8216_port
),
825 .n_attr
= ARRAY_SIZE(ar8216_vlan
),
827 .get_port_pvid
= ar8216_get_pvid
,
828 .set_port_pvid
= ar8216_set_pvid
,
829 .get_vlan_ports
= ar8216_get_ports
,
830 .set_vlan_ports
= ar8216_set_ports
,
831 .apply_config
= ar8216_hw_apply
,
832 .reset_switch
= ar8216_reset_switch
,
833 .get_port_link
= ar8216_get_port_link
,
837 ar8216_config_init(struct phy_device
*pdev
)
839 struct ar8216_priv
*priv
= pdev
->priv
;
840 struct net_device
*dev
= pdev
->attached_dev
;
841 struct switch_dev
*swdev
;
845 priv
= kzalloc(sizeof(struct ar8216_priv
), GFP_KERNEL
);
852 ret
= ar8216_id_chip(priv
);
856 if (pdev
->addr
!= 0) {
857 if (priv
->chip
== AR8316
) {
858 pdev
->supported
|= SUPPORTED_1000baseT_Full
;
859 pdev
->advertising
|= ADVERTISED_1000baseT_Full
;
861 /* check if we're attaching to the switch twice */
862 pdev
= pdev
->bus
->phy_map
[0];
868 /* switch device has not been initialized, reuse priv */
870 priv
->port4_phy
= true;
877 /* switch device has been initialized, reinit */
879 priv
->dev
.ports
= (AR8216_NUM_PORTS
- 1);
880 priv
->initialized
= false;
881 priv
->port4_phy
= true;
882 ar8316_hw_init(priv
);
890 printk(KERN_INFO
"%s: AR%d switch driver attached.\n",
891 pdev
->attached_dev
->name
, priv
->chip
);
893 pdev
->supported
= priv
->chip
== AR8316
?
894 SUPPORTED_1000baseT_Full
: SUPPORTED_100baseT_Full
;
895 pdev
->advertising
= pdev
->supported
;
897 mutex_init(&priv
->reg_mutex
);
898 priv
->read
= ar8216_mii_read
;
899 priv
->write
= ar8216_mii_write
;
904 swdev
->cpu_port
= AR8216_PORT_CPU
;
905 swdev
->ops
= &ar8216_sw_ops
;
906 swdev
->ports
= AR8216_NUM_PORTS
;
908 if (priv
->chip
== AR8316
) {
909 swdev
->name
= "Atheros AR8316";
910 swdev
->vlans
= AR8X16_MAX_VLANS
;
912 if (priv
->port4_phy
) {
913 /* port 5 connected to the other mac, therefore unusable */
914 swdev
->ports
= (AR8216_NUM_PORTS
- 1);
916 } else if (priv
->chip
== AR8236
) {
917 swdev
->name
= "Atheros AR8236";
918 swdev
->vlans
= AR8216_NUM_VLANS
;
919 swdev
->ports
= AR8216_NUM_PORTS
;
921 swdev
->name
= "Atheros AR8216";
922 swdev
->vlans
= AR8216_NUM_VLANS
;
925 ret
= register_switch(&priv
->dev
, pdev
->attached_dev
);
932 if (priv
->chip
== AR8216
)
933 ret
= ar8216_hw_init(priv
);
934 else if (priv
->chip
== AR8236
)
935 ret
= ar8236_hw_init(priv
);
936 else if (priv
->chip
== AR8316
)
937 ret
= ar8316_hw_init(priv
);
942 ret
= ar8216_reset_switch(&priv
->dev
);
948 /* VID fixup only needed on ar8216 */
949 if (pdev
->addr
== 0 && priv
->chip
== AR8216
) {
951 pdev
->netif_receive_skb
= ar8216_netif_receive_skb
;
952 pdev
->netif_rx
= ar8216_netif_rx
;
953 priv
->ndo_old
= dev
->netdev_ops
;
954 memcpy(&priv
->ndo
, priv
->ndo_old
, sizeof(struct net_device_ops
));
955 priv
->ndo
.ndo_start_xmit
= ar8216_mangle_tx
;
956 dev
->netdev_ops
= &priv
->ndo
;
969 ar8216_read_status(struct phy_device
*phydev
)
971 struct ar8216_priv
*priv
= phydev
->priv
;
972 struct switch_port_link link
;
975 if (phydev
->addr
!= 0)
976 return genphy_read_status(phydev
);
978 ar8216_read_port_link(priv
, phydev
->addr
, &link
);
979 phydev
->link
= !!link
.link
;
983 switch (link
.speed
) {
984 case SWITCH_PORT_SPEED_10
:
985 phydev
->speed
= SPEED_10
;
987 case SWITCH_PORT_SPEED_100
:
988 phydev
->speed
= SPEED_100
;
990 case SWITCH_PORT_SPEED_1000
:
991 phydev
->speed
= SPEED_1000
;
996 phydev
->duplex
= link
.duplex
? DUPLEX_FULL
: DUPLEX_HALF
;
998 /* flush the address translation unit */
999 mutex_lock(&priv
->reg_mutex
);
1000 ret
= ar8216_wait_bit(priv
, AR8216_REG_ATU
, AR8216_ATU_ACTIVE
, 0);
1002 priv
->write(priv
, AR8216_REG_ATU
, AR8216_ATU_OP_FLUSH
);
1003 mutex_unlock(&priv
->reg_mutex
);
1005 phydev
->state
= PHY_RUNNING
;
1006 netif_carrier_on(phydev
->attached_dev
);
1007 phydev
->adjust_link(phydev
->attached_dev
);
1013 ar8216_config_aneg(struct phy_device
*phydev
)
1015 if (phydev
->addr
== 0)
1018 return genphy_config_aneg(phydev
);
1022 ar8216_probe(struct phy_device
*pdev
)
1024 struct ar8216_priv priv
;
1027 return ar8216_id_chip(&priv
);
1031 ar8216_remove(struct phy_device
*pdev
)
1033 struct ar8216_priv
*priv
= pdev
->priv
;
1034 struct net_device
*dev
= pdev
->attached_dev
;
1039 if (priv
->ndo_old
&& dev
)
1040 dev
->netdev_ops
= priv
->ndo_old
;
1041 if (pdev
->addr
== 0)
1042 unregister_switch(&priv
->dev
);
1046 static struct phy_driver ar8216_driver
= {
1047 .phy_id
= 0x004d0000,
1048 .name
= "Atheros AR8216/AR8236/AR8316",
1049 .phy_id_mask
= 0xffff0000,
1050 .features
= PHY_BASIC_FEATURES
,
1051 .probe
= ar8216_probe
,
1052 .remove
= ar8216_remove
,
1053 .config_init
= &ar8216_config_init
,
1054 .config_aneg
= &ar8216_config_aneg
,
1055 .read_status
= &ar8216_read_status
,
1056 .driver
= { .owner
= THIS_MODULE
},
1062 return phy_driver_register(&ar8216_driver
);
1068 phy_driver_unregister(&ar8216_driver
);
1071 module_init(ar8216_init
);
1072 module_exit(ar8216_exit
);
1073 MODULE_LICENSE("GPL");