target/linux/pxa/patches-2.6.21/005-compact-flash.patch

   1 Index: linux-2.6.21gum/drivers/pcmcia/Makefile
   2 ===================================================================
   3 --- linux-2.6.21gum.orig/drivers/pcmcia/Makefile
   4 +++ linux-2.6.21gum/drivers/pcmcia/Makefile
   5 @@ -69,4 +69,4 @@ sa1100_cs-$(CONFIG_SA1100_SIMPAD)             += sa
   6  pxa2xx_cs-$(CONFIG_ARCH_LUBBOCK)               += pxa2xx_lubbock.o sa1111_generic.o
   7  pxa2xx_cs-$(CONFIG_MACH_MAINSTONE)             += pxa2xx_mainstone.o
   8  pxa2xx_cs-$(CONFIG_PXA_SHARPSL)                        += pxa2xx_sharpsl.o
   9 -
  10 +pxa2xx_cs-$(CONFIG_ARCH_GUMSTIX)               += pxa2xx_gumstix.o
  11 Index: linux-2.6.21gum/drivers/pcmcia/pxa2xx_gumstix.c
  12 ===================================================================
  13 --- /dev/null
  14 +++ linux-2.6.21gum/drivers/pcmcia/pxa2xx_gumstix.c
  15 @@ -0,0 +1,272 @@
  16 +/*
  17 + * linux/drivers/pcmcia/pxa2xx_gumstix.c
  18 + *
  19 + * Gumstix PCMCIA specific routines. Based on Mainstone
  20 + *
  21 + * Copyright 2004, Craig Hughes <craig@gumstix.com>
  22 + *
  23 + * This program is free software; you can redistribute it and/or modify
  24 + * it under the terms of the GNU General Public License version 2 as
  25 + * published by the Free Software Foundation.
  26 + */
  27 +
  28 +#include <linux/module.h>
  29 +#include <linux/init.h>
  30 +#include <linux/kernel.h>
  31 +#include <linux/errno.h>
  32 +#include <linux/interrupt.h>
  33 +#include <linux/device.h>
  34 +#include <linux/platform_device.h>
  35 +
  36 +#include <pcmcia/ss.h>
  37 +
  38 +#include <asm/hardware.h>
  39 +#include <asm/delay.h>
  40 +#include <asm/arch/pxa-regs.h>
  41 +#include <asm/irq.h>
  42 +#include <asm/io.h>
  43 +
  44 +#include <asm/arch/gumstix.h>
  45 +
  46 +#include "soc_common.h"
  47 +
  48 +static struct pcmcia_irqs gumstix_pcmcia_irqs0[] = {
  49 +       { 0, GUMSTIX_S0_nCD_IRQ,        "CF0 nCD"     },
  50 +       { 0, GUMSTIX_S0_nSTSCHG_IRQ,    "CF0 nSTSCHG" },
  51 +};
  52 +
  53 +static struct pcmcia_irqs gumstix_pcmcia_irqs1[] = {
  54 +       { 1, GUMSTIX_S1_nCD_IRQ,        "CF1 nCD"     },
  55 +       { 1, GUMSTIX_S1_nSTSCHG_IRQ,    "CF1 nSTSCHG" },
  56 +};
  57 +
  58 +static int net_cf_vx_mode = 0;
  59 +
  60 +static int gumstix_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
  61 +{
  62 +       if(skt->nr == 0)
  63 +       {
  64 +               pxa_gpio_mode(GPIO_GUMSTIX_nSTSCHG_0_MD);
  65 +               pxa_gpio_mode(GPIO_GUMSTIX_nCD_0_MD);
  66 +               if(net_cf_vx_mode)
  67 +                       pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_0_OLD_MD);
  68 +               else
  69 +                       pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_0_MD);
  70 +       } else {
  71 +               pxa_gpio_mode(GPIO_GUMSTIX_nSTSCHG_1_MD);
  72 +               pxa_gpio_mode(GPIO_GUMSTIX_nCD_1_MD);
  73 +               pxa_gpio_mode(GPIO_GUMSTIX_PRDY_nBSY_1_MD);
  74 +       }
  75 +
  76 +       pxa_gpio_mode(GPIO_GUMSTIX_nPOE_MD);
  77 +       pxa_gpio_mode(GPIO_GUMSTIX_nPWE_MD);
  78 +       pxa_gpio_mode(GPIO_GUMSTIX_nPIOR_MD);
  79 +       pxa_gpio_mode(GPIO_GUMSTIX_nPIOW_MD);
  80 +       pxa_gpio_mode(GPIO_GUMSTIX_nPCE_1_MD);
  81 +       pxa_gpio_mode(GPIO_GUMSTIX_nPCE_2_MD);
  82 +       pxa_gpio_mode(GPIO_GUMSTIX_pSKTSEL_MD);
  83 +       pxa_gpio_mode(GPIO_GUMSTIX_nPREG_MD);
  84 +       pxa_gpio_mode(GPIO_GUMSTIX_nPWAIT_MD);
  85 +       pxa_gpio_mode(GPIO_GUMSTIX_nIOIS16_MD);
  86 +
  87 +       skt->irq = (skt->nr == 0) ? ((net_cf_vx_mode == 0) ? GUMSTIX_S0_PRDY_nBSY_IRQ : GUMSTIX_S0_PRDY_nBSY_OLD_IRQ) : GUMSTIX_S1_PRDY_nBSY_IRQ;
  88 +
  89 +       return (skt->nr == 0) ? soc_pcmcia_request_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0)) :
  90 +                               soc_pcmcia_request_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
  91 +}
  92 +
  93 +static void gumstix_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
  94 +{
  95 +       if(skt->nr == 0)
  96 +       {
  97 +               soc_pcmcia_free_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0));
  98 +       } else {
  99 +               soc_pcmcia_free_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
 100 +       }
 101 +}
 102 +
 103 +static void gumstix_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
 104 +                                   struct pcmcia_state *state)
 105 +{
 106 +       unsigned int cd, prdy_nbsy, nbvd1;
 107 +       if(skt->nr == 0)
 108 +       {
 109 +               cd = GPIO_GUMSTIX_nCD_0;
 110 +               if(net_cf_vx_mode)
 111 +                       prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_0_OLD;
 112 +               else
 113 +                       prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_0;
 114 +               nbvd1 = GPIO_GUMSTIX_nBVD1_0;
 115 +       } else {
 116 +               cd = GPIO_GUMSTIX_nCD_1;
 117 +               prdy_nbsy = GPIO_GUMSTIX_PRDY_nBSY_1;
 118 +               nbvd1 = GPIO_GUMSTIX_nBVD1_1;
 119 +       }
 120 +       state->detect = !(GPLR(cd) & GPIO_bit(cd));
 121 +       state->ready  = !!(GPLR(prdy_nbsy) & GPIO_bit(prdy_nbsy));
 122 +       state->bvd1   = !!(GPLR(nbvd1) & GPIO_bit(nbvd1));
 123 +       state->bvd2   = 1;
 124 +       state->vs_3v  = 0;
 125 +       state->vs_Xv  = 0;
 126 +       state->wrprot = 0;
 127 +}
 128 +
 129 +static int gumstix_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
 130 +                                      const socket_state_t *state)
 131 +{
 132 +       return 0;
 133 +}
 134 +
 135 +static void gumstix_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
 136 +{
 137 +       if(skt->nr) {
 138 +               soc_pcmcia_enable_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0));
 139 +       } else {
 140 +               soc_pcmcia_enable_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
 141 +       }
 142 +}
 143 +
 144 +static void gumstix_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
 145 +{
 146 +       if(skt->nr) {
 147 +               soc_pcmcia_disable_irqs(skt, gumstix_pcmcia_irqs0, ARRAY_SIZE(gumstix_pcmcia_irqs0));
 148 +       } else {
 149 +               soc_pcmcia_disable_irqs(skt, gumstix_pcmcia_irqs1, ARRAY_SIZE(gumstix_pcmcia_irqs1));
 150 +       }
 151 +}
 152 +
 153 +static struct pcmcia_low_level gumstix_pcmcia_ops = {
 154 +       .owner                  = THIS_MODULE,
 155 +       .hw_init                = gumstix_pcmcia_hw_init,
 156 +       .hw_shutdown            = gumstix_pcmcia_hw_shutdown,
 157 +       .socket_state           = gumstix_pcmcia_socket_state,
 158 +       .configure_socket       = gumstix_pcmcia_configure_socket,
 159 +       .socket_init            = gumstix_pcmcia_socket_init,
 160 +       .socket_suspend         = gumstix_pcmcia_socket_suspend,
 161 +       .nr                     = 2,
 162 +};
 163 +
 164 +static struct platform_device *gumstix_pcmcia_device;
 165 +
 166 +inline void __init gumstix_pcmcia_cpld_clk(void)
 167 +{
 168 +       GPCR(GPIO_GUMSTIX_nPOE) = GPIO_bit(GPIO_GUMSTIX_nPOE);
 169 +       GPSR(GPIO_GUMSTIX_nPOE) = GPIO_bit(GPIO_GUMSTIX_nPOE);
 170 +}
 171 +
 172 +inline unsigned char __init gumstix_pcmcia_cpld_read_bits(int bits)
 173 +{
 174 +       unsigned char result = 0;
 175 +       unsigned int shift = 0;
 176 +       while(bits--)
 177 +       {
 178 +               result |= !!(GPLR(GPIO_GUMSTIX_nCD_0) & GPIO_bit(GPIO_GUMSTIX_nCD_0)) << shift;
 179 +               shift ++;
 180 +               gumstix_pcmcia_cpld_clk();
 181 +       }
 182 +       printk("CPLD responded with: %02x\n",result);
 183 +       return result;
 184 +}
 185 +
 186 +/* We use the CPLD on the CF-CF card to read a value from a shift register.  If we can read that
 187 + * magic sequence, then we have 2 CF cards; otherwise we assume just one
 188 + * The CPLD will send the value of the shift register on GPIO11 (the CD line for slot 0)
 189 + * when RESET is held in reset.  We use GPIO48 (nPOE) as a clock signal,
 190 + * GPIO52/53 (card enable for both cards) to control read/write to the shift register
 191 + */
 192 +static void __init gumstix_count_cards(void)
 193 +{
 194 +       pxa_gpio_mode(GPIO_GUMSTIX_nPOE | GPIO_OUT);
 195 +       pxa_gpio_mode(GPIO_GUMSTIX_nPCE_1 | GPIO_OUT);
 196 +       pxa_gpio_mode(GPIO_GUMSTIX_nPCE_2 | GPIO_OUT);
 197 +       pxa_gpio_mode(GPIO_GUMSTIX_nCD_0 | GPIO_IN);
 198 +       if(net_cf_vx_mode)
 199 +               pxa_gpio_mode(GPIO_GUMSTIX_CF_OLD_RESET | GPIO_OUT);
 200 +       else
 201 +               pxa_gpio_mode(GPIO_GUMSTIX_CF_RESET  | GPIO_OUT);
 202 +
 203 +       // Enter reset
 204 +       if(net_cf_vx_mode)
 205 +               GPSR(GPIO_GUMSTIX_CF_OLD_RESET) = GPIO_bit(GPIO_GUMSTIX_CF_OLD_RESET);
 206 +       else
 207 +               GPSR(GPIO_GUMSTIX_CF_RESET) = GPIO_bit(GPIO_GUMSTIX_CF_RESET);
 208 +
 209 +       // Setup the shift register
 210 +       GPSR(GPIO_GUMSTIX_nPCE_1) = GPIO_bit(GPIO_GUMSTIX_nPCE_1);
 211 +       GPCR(GPIO_GUMSTIX_nPCE_2) = GPIO_bit(GPIO_GUMSTIX_nPCE_2);
 212 +
 213 +       // Tick the clock to program the shift register
 214 +       gumstix_pcmcia_cpld_clk();
 215 +
 216 +       // Now set shift register into read mode
 217 +       GPCR(GPIO_GUMSTIX_nPCE_1) = GPIO_bit(GPIO_GUMSTIX_nPCE_1);
 218 +       GPSR(GPIO_GUMSTIX_nPCE_2) = GPIO_bit(GPIO_GUMSTIX_nPCE_2);
 219 +
 220 +       // We can read the bits now -- 0xC2 means "Dual compact flash"
 221 +       if(gumstix_pcmcia_cpld_read_bits(8) != 0xC2)
 222 +       {
 223 +               // We do not have 2 CF slots
 224 +               gumstix_pcmcia_ops.nr = 1;
 225 +       }
 226 +}
 227 +
 228 +#ifdef CONFIG_ARCH_GUMSTIX_VERDEX
 229 +static void __init gumstix_check_if_netCF_vx(void)
 230 +{
 231 +       void *network_controller_memory = ioremap(0x04000300,16);
 232 +       // Look for the special 91c111 value in the bank select register
 233 +       if((0xff00 & readw(network_controller_memory+0x0e)) == 0x3300) {
 234 +               printk("Detected netCF-vx board: using older GPIO configuration\n");
 235 +               net_cf_vx_mode = 1;
 236 +       } else {
 237 +               printk("Not netCF-vx board: using newer GPIO configuration\n");
 238 +               net_cf_vx_mode = 0;
 239 +       }
 240 +       iounmap(network_controller_memory);
 241 +}
 242 +#endif
 243 +
 244 +static int __init gumstix_pcmcia_init(void)
 245 +{
 246 +       int ret;
 247 +
 248 +#ifdef CONFIG_ARCH_GUMSTIX_VERDEX
 249 +       gumstix_check_if_netCF_vx();
 250 +#endif
 251 +
 252 +       gumstix_count_cards();
 253 +
 254 +       udelay(50);
 255 +       if(net_cf_vx_mode)
 256 +               GPCR(GPIO_GUMSTIX_CF_OLD_RESET) = GPIO_bit(GPIO_GUMSTIX_CF_OLD_RESET);
 257 +       else
 258 +               GPCR(GPIO_GUMSTIX_CF_RESET) = GPIO_bit(GPIO_GUMSTIX_CF_RESET);
 259 +
 260 +       gumstix_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1);
 261 +       if (!gumstix_pcmcia_device)
 262 +               return -ENOMEM;
 263 +
 264 +       gumstix_pcmcia_device->dev.platform_data = &gumstix_pcmcia_ops;
 265 +
 266 +       ret = platform_device_add(gumstix_pcmcia_device);
 267 +       if (ret)
 268 +               platform_device_put(gumstix_pcmcia_device);
 269 +
 270 +       return ret;
 271 +}
 272 +
 273 +static void __exit gumstix_pcmcia_exit(void)
 274 +{
 275 +       /*
 276 +        * This call is supposed to free our gumstix_pcmcia_device.
 277 +        * Unfortunately platform_device don't have a free method, and
 278 +        * we can't assume it's free of any reference at this point so we
 279 +        * can't free it either.
 280 +        */
 281 +       platform_device_unregister(gumstix_pcmcia_device);
 282 +}
 283 +
 284 +fs_initcall(gumstix_pcmcia_init);
 285 +module_exit(gumstix_pcmcia_exit);
 286 +
 287 +MODULE_LICENSE("GPL");